太阳能热水器内表面电刷镀锌

用电刷镀的方法,对尺寸为2000mm×1000mm×0.8mm 的 A_3钢板电刷镀锌保护层;并对影响镀锌层质量的因素进行了充分的研究。     

Magnetic properties of nickel filament polymer-matrix composites

The magnetic properties of polyethersulfone-matrix composites with 3-19 vol.% polycrystalline nickel filaments (0.4 (im diam) were investigated. These filaments were found to exhibit hysteresis energy loss 10800 J/m³ of nickel and coercive force 16.9 kA/m, compared to corresponding values of 4930 J/m³ and 4.7 kA/m for 2 μ.m diam polycrystalline nickel fibers, 1020 J/m³ and 0.5 kA/m for 20 μm diam polycrystalline nickel fibers, and 1280 J/m³ and 2.3 kA/m for solid polycrystalline nickel.     

脱苯工艺的节能改造

焦化厂富油脱苯工艺中，管式炉法较蒸汽法节能。本溪钢铁公司焦化厂产焦１８０万ｔ／ａ的装置，其富油脱苯工艺由蒸汽法改为管式炉法后，每年可节煤７０００ｔ。     

Air Filtration and Radon Decay Product Mitigation

Air cleaning as a means of mitigating the risks arising from exposure to indoor radon progeny has been evaluated in a single-family house in the north eastem US. using an automated, semi-continuous activity-weighted size distribution measurement system. The measurements included radon concentration, condensation nuclei count, and activity-weighted size distribution of radon decay products. Measurements were made in the house with and without an operating air filtration system and with various particle sources common to normal indoor activities operating. Aerosols were generated by running water in a shower, candle burning, cigarette smoking, vacuuming, opening doors, and cooking. Using a room model, the changes in attachment rates, average attachment diameters, and deposition rates of the unattached fraction with and without the air cleaning system were calculated. In the presence of active aerosol sources, the air filtration unit typically reduced the concentration of particles within the hour following the end of particle generation. After candle burning, cigarette smoking, and vacuuming in the bedroom, the reductions of PAEC by air filtration are about 60% with the air filtration system operating in the bedroom. During cooking in the kitchen, the reductions of PAEC in the bedroom with the air filtration system were about 40%. However, for all cases the dose reductions were smaller than the particle and PAEC reductions. For those particles that were generated within the bedroom, there was a 20% to 50% reduction in dose. In the case of cooking where the door was open and particles infiltrated from the rest of the house, the dose reduction was only 5% on average and appears to be insignificant. Thus, the dose reductions were h e r than the reductions in activity concentration, but there were no cases where the estimated dose actually increased.     

热力系统节能技术改造方案介绍

针对热电厂热力系统存在的浪费能源和设计不合理现象作了浅析 ,介绍了几种对热力系统进行改造的方案 ,并对取得的经济效益进行了计算。     

Formal methods: The next generation of system design tools

Because of the growing demand for increasingly complex computer-based systems there is now an urgent need to provide tools to assist during the design of such systems. Formal specifications and formal methods provide such assistance but their widespread adoption has been hindered by the so-called ‘math fear’ and the perception that the tools are too difficult, too time consuming and too costly to use in a commercial environment. The aim of this article is to dispel the mystery surrounding the topic and to explain what formal methods are, how and why they are used, the benefits that accrue and why the technology should be accepted on a broader front. The application of formal methods to the design of computer-based systems will be discussed without resorting to jargon or mathematics. The discussion will concentrate more on the software content of systems but the arguments apply equally well to hardware. Some of the available tools will also be introduced.     

能量"三环节"理论在原油蒸馏装置扩能改造中的应用

中国石化扬子石化股份有限公司炼油厂在第一套常减压蒸馏装置扩能改造中，使用了多项节能技术以实现能量的优化利用。本文以标定数据为基础，运用能量“三环节”理论对该装置的用能状况进行了计算和分析，从能量利用角度对装置的扩能改造效果进行了评价，并为装置的进一步优化能量利用提出了相应措施。     

Structure and formation energy of steps on the GaAs(001)-2 × 4 surface

The energies of various steps on the As-terminated GaAs(001)-2 × 4 surface are evaluated using a novel, approximate method of “linear combination of structural motifs”. It is based on the observation that previous total energy minimizations of semiconductor surfaces produced invariably equilibrium structures made of the same recurring local structural motifs, e.g. tetrahedral fourfold Ga, pyramidal threefold As, etc. Furthermore, such surface structures were found to obey consistently the octet rules as applied to the local motifs. We thus express the total energy of a given semiconductor surface as a sum of (i) the energies _M of the local structural motifs appearing in the surface under consideration and (ii) an electrostatic term representing the Madelung energy of point charges resulting from application of the octet rule. The motif energies are derived from a set of pseudopotential total energy calculations for flat GaAs(001) surfaces and for point defects in bulk GaAs. This set of parameters suffices to reproduce the energies of other (001) surfaces, calculated using the same pseudopotential total energy approach. Application to GaAs(001)-2 × 4 surfaces with steps reveals the following. (i) “Primitive steps”, defined solely according to their geometries (i.e. step heights, widths and orientations) are often unstable. (ii) Additional, non-geometric factors beyond step geometries such as addition of surface adatoms, creation of vacancies and atomic rebonding at step edges are important to lower step energies. So is step-step interaction. (iii) The formation of steps is generally endothermic. (iv) The formation of steps with edges parallel to the direction of surface As dimers (A steps) is energetically favored over the formation of steps whose edges are perpendicular to the As dimers (B steps).