建筑围护结构与节能

针对我国夏热冬冷地区的建筑气候特点,对建筑围护结构节能在设计中的要点和意义进行了讨论。     

高压电动机定子线圈匝间绝缘问题的探讨

在实践经验的基础上，分析了我国匝间绝缘短路的主要原因，提出在匝间绝缘的设计，制造工艺及耐压试验等工序采取合理措施，以提高匝间绝缘的可靠性。     

Analysis of lightning surge propagation in wind farm

Wind power generation is expected to become more important in future distribution systems. Although several prospective reports such as IEC 61400‐24 and NREL SR‐500‐31115 indicate an insulation scheme and grounding design for lighting protection, there still seems to be too few investigations on the problems. This paper therefore discusses lightning surge analysis using a wind farm model with 2 or 10 ideal wind turbines. Changing parameters such as grounding resistance and lightning strike points, several cases were studied. As a result of the analysis using digital simulator ARENE, it is clear that the surge tends to propagate toward the end of a distribution line in a wind farm and there is the possibility of insulation accidents at the other wind turbines when lightning attacks a wind turbine. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(2): 30– 38, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20364     

Thermal Radiative Properties of Xonotlite Insulation Material

Introduction Xonotlite-type calcium silicate (6CaO?6SiO2?H2O) is synthesized porous insulation material by hydrothermal processing with quartz powder and limestone as the raw material (with CaO/ SiO2≈1:1). Compared with fire- retardant fibre, xonotlite has more excellent insulating performance, such as low thermal conductivity, environment friendly, high intension, and wide applying temperature range, which has been emphasized in recent years by many scholars and widely used in many indu…     

薄层隔热保温涂料的研制及应用

常规保温材料的研究以提高孔隙率、提高热阻、降低传导传热性能为主,但其对流传热及辐射传热较难降低。当今以传热机理改进保温材料及保温结构是重要发展方向。文章介绍了一种借鉴国外航天工业用高科技绝热涂层的技术思路,并结合国情研制成功的具有高辐射率的薄层隔热保温涂料,它可弥补常规保温材料的不足。该保温涂料以液态涂料方式存在,干燥后的涂层热阻较大,特别是热反射率高,可有效地降低辐射传热,施工方便,涂层薄,无接缝,附着力好,集防水隔热外护于一体。绝热等级为R21.1,热反射度0.79,热辐射率0.83,固含量54％,性能接近国外同类产品水平,成本仅为国外产品的1/4左右。可直接以涂层方式使用,也可与其他多孔保温材料复合构成低辐射传热结构,作为石油石化行业成品油罐及储罐的隔热保温、管道及设备的保冷及屋面隔热保温涂层使用,综合节能效益高。     

GSM技术在配电网故障自动隔离及恢复系统的应用

为了使配电网故障的隔离和恢复的通讯更加可靠、迅速、经济，设计了一种基于GSM通讯技术，借助移动通讯系统短信业务和数据业务，实现配电网故障的自动隔离与恢复的系统。该系统通过MCU采集数据，判断故障位置与故障类型，经GSM通讯模块上传主站，主站统筹全局，实现故障段的切除，非故障区的供电。阐述了系统的工作原理、硬件结构、通讯协议和软件流程。现场的实际运行情况证明数据上报通讯准确率为100％，多次模拟线路故障，根据故障点的不同，一般在2～3min内系统都能可靠的隔离故障，恢复系统。     

The method of testing of XLPE cable insulation resistance to partial discharges and electrical treeing

The paper gives a method of model XLPE medium voltage cable insulation testing for partial discharges and electrical treeing with a point to plane test geometry. Based on this method, a comparative estimate of insulation resistance to treeing and partial discharges have been made. XLPE crosslinked by different methods (steam medium and hot nitrogen medium) and with varying contents of inorganic filler kaolin were tested. The characteristics of partial discharges were measured by means of a pulse height analyser characterized with a microscope. The data have been analysed statistically.     

低温导热绝缘胶粘剂研究

一种低温导热绝胶粘剂用于氢氧发动机系统表面温度传感器的端封和胶接安装，介绍了胶粘剂的技术要求，研究方案及试验结果。以DW－3超低温胶粘剂为基础，经改性设计后，仍能保持胶粘剂原有的耐低温特性，而且其导热，绝缘等性能均能满足设计和使用要求。     

活性碳和5A分子筛的吸附特性及其在真空获得中的作用

评述了活性碳和５Ａ分子筛的吸附等温线及其在真空佩温绝热夹层真空获得中的作用。分析了真空夹层抽真空除气时用Ｎ＿２气置换以及用“多次吸附－脱附Ｎ＿２气”方法活化吸附剂等先进工艺的机理。论述了根据吸附剂吸水的吸附等温线，合理确定活化工艺条件的方法。     

IGBT串联均压方法综述

绝缘栅双极性晶体管IGBT(insulated gate bipolar transistor)在高电压场合应用时需串联使用满足电压需求。由于器件内部的性能差异和外围电路参数不一致等,引起IGBT模块之间电压不均衡问题,威胁其运行安全。综述了国内外IGBT串联均压方法的发展及其研究现状。根据均压方法机理的不同,将IGBT串联均压方法分为被动均压方法和主动均压方法两种,进一步将主动均压方法归纳为无源控制方法和有源控制方法两类。根据各类方法的基本电路拓扑分析了均压原理,梳理了不同方法在电路拓扑、参数选择和控制策略等方面的优化和最新进展。通过均压效果、附加损耗和可靠性等多方面对不同均压方法进行对比,被动均压方法拓扑简单不需外加控制电路更适合在低频应用场合,在高频应用场合中,准有源栅极控制法以单驱动与无源器件相结合的方式,具有良好的发展前景。最后对IGBT串联均压方法进行了展望。