卸煤机走行部的技术改造

通过对卸煤机走行部的技术改造,提高了工作效率,节省了维修费用。     

Experimental investigation of the normal spectral emissivity and other thermophysical properties of pulse-heated Ni-Ti and Au-Ni alloys into the liquid phase

1. Introduction Metal working industry needs accurate thermo- physical properties of liquid metals and alloys as input data for different simulation routines to im- prove the performance of their products. Within this paper we continue the systematic investigation of the dependence of emissivity of binary alloys on the relative concentration of the constituent elements (for a previous paper see [1]). 2. Experimental method A fast ohmic pulse heating technique is applied to heat metallic wire-s…     

Filtration of liquid aerosols with a horizontal fibrous filter

The aim of this study was to determine the filtration efficiency and pressure drop in liquid aerosol capture mechanisms using a fibrous coalescent filter. The experimental set-up was designed to measure filtration efficiency and pressure drop through the filter. To avoid the gravimetric effect, the filter was placed horizontally. A series of experiments highlighted the importance of operating conditions such as filtration velocity and aerosol concentration. The results demonstrated the advantage of working at high velocities to minimise the resistance of the medium and to enhance the mass efficiency of the coalescent filter. In parallel, no effect of aerosol concentrations in the pressure drop increase was noted.     

排气管偏置对PV型旋风分离器性能影响的研究

以Ф300mm、标准PV型旋风分离器为基准模型进行冷态对比实验，研究了排气管与筒体轴线偏心布置对PV型旋风分离器分离性能的影响。结果表明，排气管偏置是进一步提高PV型旋风分离器性能的有效措施之一。在适当的偏心矩和偏置方位下，不仅能降低压降，还可以显著提高分离效率。     

Measurement accuracy enhancements for wideband modulated signals

Time‐domain waveform measurements of wideband modulated signals, although attractive for communication systems modeling applications, have until now lacked the required accuracy for quantitative analysis. New developments described here enhance the accuracy of these measurements, enabling their application to communication system characterization and modeling. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 13: 32–39, 2003.     

多孔材料气体流量的简便计算

采用简便方法计算气体通过多孔材料的流量。当层流时，流量与压差按线性关系计算；紊流时，应按幂函数关系计算。本文提出了计算公式。     

等径侧向挤压应变分析

对等径侧向挤压变形的应变进行了深入的分析，应用平面纯剪切变形应变分析的结果，得到了等径侧向挤压变形真应变和等效真应变的计算公式，分析了循环等径Ｓ型侧向挤压真空应变和等效真应变的变化规律。     

厚度伸缩压电陶瓷振子

对厚度伸缩压电陶瓷振子的振动状态进行了分析,并得到其等效电路.推导了振子的谐振频率、反谐振频率以及等效电路参数与振子尺寸、振子材料的介电、压电、弹性常数间的关系式.最后讨论了振子的一些特性和制作.     

高速列车浮式地板振动响应有限元分析

针对采用试验方法开发高速列车浮式地板耗时耗力,且试验规模小,不能反映整车的振动效果的问题,基于有限元法进行高速列车振动响应分析.对三明治夹芯理论、蜂窝板理论和等效板理论进行比较,确定采用等效板理论数值模拟某浮式地板中的蜂窝板;利用橡胶材料的超弹性理论拟合橡胶材料参数;建立完整模型模拟实际工况下浮式地板的振动响应,得到浮式地板的隔振效果.结果表明此浮式地板的隔振效果约为90%,满足设计要求.     

水工钢闸门主梁模糊失效概率计算方法研究

为合理计算水工钢闸门主梁模糊失效概率,分别将主梁相对变形当作一个随机变量及三个变量的组合,采用积分法、当量随机化方法及蒙特卡罗法进行了计算。当相对变形为一个随机量时,采用积分法及当量随机化方法计算,两者的差别在于积分法用隶属函数描述模糊限值,当量随机化方法是将模糊限值当量作为一个随机量。当相对变形看作三个变量的组合时采用蒙特卡罗法进行计算,该方法考虑了三个变量的分布特性,更符合实际情况,模糊限值也用随机量表示。计算表明,积分法与当量随机化方法结果相近,验证了当量随机化方法的精度;蒙特卡罗法结果与相对变形服从正态分布时、用当量随机化方法计算的结果接近,故主梁相对变形服从正态分布更为合理。三种计算方法中,当量随机化方法计算失效概率相较于其它方法有计算过程简便,效率高的优点。