Quantitative evaluation of generator power control effect of FACTS controllers for power system stabilization

The advancement of power electronics technologies has significantly developed the power system stabilizing controllers. Quantitative as well as qualitative evaluation of their effectiveness in power systems is a matter of great importance for the feasibility investigation of these apparatus. In this paper, the possible control region of FACTS controllers with series and/or shunt configuration in a single machine to infinite bus system is formulated in the powerangle curve with a set of algebraic equations. The effectiveness of TCPST (Thyristor‐Controlled Phase Shifting Transformer), SSSC (Static Synchronous Series Compensator), and TCSC (Thyristor‐Controlled Series Compensator) for the improvement of the transient stability is evaluated quantitatively as a numerical example. The correctness of the proposed method has been confirmed by analysis based on the electromagnetic transients simulation with a detailed system model. © 2001 Scripta Technica, Electr Eng Jpn, 138(3): 43–51, 2002     

Sensorless control of synchronous reluctance motors using on‐line parameter identification method not affected by position estimation accuracy

This paper presents a novel on‐line parameter identification method for sensorless control of Synchronous Reluctance Motors (SynRMs). Although conventional sensorless control methods based on mathematical models usually need some complex measurements of motor parameters in advance, the proposed identification method does not require them and can be realized on‐line. The proposed method identifies motor parameters under sensorless control, so rotor position and velocity cannot be used to identify these parameters. However, the proposed method does not need rotor position and velocity, and identified parameters are not affected by these estimation errors. The sensorless control using identified motor parameters is realized, and the effectiveness of the proposed method is verified by experimental results. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(3): 62–69, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20258     

大中型风力发电机组可靠性研究

研究了大中型风力发电机组的可靠性，讨论了可靠性指标的分配，可靠性设计的四个重要方面、可靠性试验计算机模拟。     

国产核电厂蒸汽发生器下封头接管区模拟装置承受循环载荷能力的试验

国产核电厂蒸汽发生器下封头群孔接管区具有应力分布复杂、焊接施工条件差的特点。为考核其承受循环载荷的能力，设计制造了与实物相似的模拟试验装置，根据核电厂运行寿命期内的载荷特点，确定了模拟试验装置的试验载荷与试验循环数。循环加载试验的结果表明，蒸汽发生器下封头群孔接管区承受循环载荷的能力在寿命期内是符合要求的。     

秦山核电厂蒸汽发生器水位控制试验

简要介绍了蒸汽发生器水位控制系统的运行方式和试验方法。试验项目包括旁通阀控制试验、主给水阀控制试验和旁通阀与主给水阀的切换试验。文中给出了试验结果,即在液位扰动和核动率扰动时,蒸汽发生器液位的变化过程。经过两个月的运行和瞬态试验,证明蒸汽发生器水位控制系统满足设计要求。     

电液同步控制筒阀在小浪底水电厂的应用

小浪底水电厂位于多泥沙的黄河干流上，水轮机活动导叶会因磨损过大而严重漏水，在水轮机的设计上必须考虑这个因素;同时，为适应混水发电，小浪底水电厂机组采用了筒阀。文中介绍了筒阀的结构特点、功能及控制原理等，并对其在现场的实际应用情况进行了分析。     

视频特技切换台的原理与功能

本文较系统、通俗地介绍了模拟视频特技切换台的矩阵输入、混合/效果放大器(M/E)、下游键、系统控制和同步发生器等电路单元,介绍了特技切换台的切换、混合、扫变、键控的基本原理和功能。     

快速搜寻卫星数字压缩信号

在没有专业仪器，没有明确参照物的条件下，如何快速定位接收天线，搜索到卫星信号，是电视工程技术人员经常遇到的问题，本文就此问题提出了一个新的解决办法，即利用已知卫星的位置来定位其它卫星的位置。     

发电机同轴励磁机电刷火花过大的原因及处理方法

本文对发电机同轴励磁机电刷火花过大的原因进行了分析．并针对这些原因提出了相应的处理办法。对规范励磁机的运行维护有很大的帮助。     

纳秒级上升时间的高压脉冲群电源

按照IEC 61000-4-4/GB 17626.4—1998的要求，首先应用PSPICE仿真确定电路中各元件的参数值，然后基于拉普拉斯变换用MATLAB求解二阶电路验证各元件参数。在此基础上研制了一台以开关电源作为高压直流电源、以氢闸流管作为主控开关的脉冲群电源。该电源体积小、重量轻、效率高、成本低廉。试验结果表明，其输出信号符合标准要求，可用于快速瞬变脉冲群抗扰度试验。