基于Wiener结构的软测量模型及辨识算法

Wiener模型结构能有效地表征系统的动态和静态特性, 因此这里首先基于这一结构建立软测量模型, 利用动态与静态子模型分别建立辅助变量与主导变量间的动态与静态关系, 并说明该软测量模型的可行性, 给出模型具体表达式. 其次, 针对所提模型, 提出分步辨识方式获得最优模型参数, 说明其可行性. 再次, 为了减少计算和实现模型在线更新, 这里提出参数辨识递推算法, 并给出软测量模型参数的收敛性结论. 通过实例仿真, 可以看出本文提出模型的可行性, 以及分步辨识方式与递推算法的有效性.     

基于FPGA的高频全数字低电平系统算法实现

本套加速器高频低电平系统(LLRF)是中国ADS注入器II高频系统的原型机,其工作频率为162.5 MHz,以实现超导加速腔的幅度与相位稳定控制和谐振频率调节。该系统主要由射频前端和数字信号处理FPGA两部分组成。射频前端主要实现高频信号的上下变频和电平匹配;数字信号处理FPGA是系统的核心,主要完成射频信号幅值与相位的数字稳定控制,超导腔谐振频率控制,以及1 000 M以太网通信。在实验室环境下,对该系统进行了幅度和相位稳定度测试,相位稳定度峰峰值为±0.3°,有效值为0.09°,幅值相对稳定度峰峰值为±5×10-3,有效值为3.2×10-3,达到了设计要求。     

Single frame correction of motion artifacts in PMD-based time of flight cameras

One of the leading time of flight imaging technologies for depth sensing is based on Photonic Mixer Devices (PMD). In PMD sensors each pixel samples the correlation between emitted and received light signals. Current PMD cameras compute eight correlation samples per pixel in four sequential stages to obtain depth with invariance to signal amplitude and offset variations. With motion, PMD pixels capture different depths at each stage. As a result, correlation samples are not coherent with a single depth, producing artifacts. We propose to detect and remove motion artifacts from a single frame taken by a PMD camera. The algorithm we propose is very fast, simple and can be easily included in camera hardware. We recover depth of each pixel by exploiting consistency of the correlation samples and local neighbors of the pixel. In addition, our method obtains the motion flow of occluding contours in the image from a single frame. The system has been validated in real scenes using a commercial low-cost PMD camera and high speed dynamics. In all cases our method produces accurate results and it highly reduces motion artifacts.     

Reliability-based robust design optimization: A general methodology using genetic algorithm

In this paper, we present an improved general methodology including four stages to design robust and reliable products under uncertainties. First, as the formulation stage, we consider reliability and robustness simultaneously to propose the new formulation of reliability-based robust design optimization (RBRDO) problems. In order to generate reliable and robust Pareto-optimal solutions, the combination of genetic algorithm with reliability assessment loop based on the performance measure approach is applied as the second stage. Next, we develop two criteria to select a solution from obtained Pareto-optimal set to achieve the best possible implementation. Finally, the result verification is performed with Monte Carlo Simulations and also the quality improvement during manufacturing process is considered by identifying and controlling the critical variables. The effectiveness and applicability of this new proposed methodology is demonstrated through a case study.     

Stabilization of Rössler chaotic dynamical system using fuzzy logic control algorithm

This paper proposes a fuzzy logic control algorithm (FLCA) to stabilize the Rössler chaotic dynamical system. The fuzzy logic control system is based on a Takagi-Sugeno-Kang inference engine and the stability analysis in the sense of Lyapunov is carried out using Lyapunov’s direct method. The new FLCA is formulated to offer sufficient inequality stability conditions. The asymptotic complexity of our algorithm is analyzed and proved to be lower in comparison with that of linear matrix inequality-based FLCAs. A set of simulation results illustrates the effectiveness of the proposed FLCA.     

Recommending suitable learning scenarios according to learners’ preferences: An improved swarm based approach

The paper presents a new approach for recommending suitable learning paths for different learners groups. Selection of the learning path is considered as recommendations to choosing and combining the sequences of learning objects (LOs) according to learners’ preferences. Learning path can be selected by applying artificial intelligence techniques, e.g. a swarm intelligence model. If we modify and/or change some LOs in the learning path, we should rearrange the alignment of new and old LOs and reallocate pheromones to achieve effective learning recommendations. To solve this problem, a new method based on the ant colony optimisation algorithm and adaptation of the solution to the changing optimum is proposed. A simulation process with a dynamic change of learning paths when new LOs are inserted was chosen to verify the method proposed. The paper contributes with the following new developments: (1) an approach of dynamic learning paths selection based on swarm intelligence, and (2) a modified ant colony optimisation algorithm for learning paths selection. The elaborated approach effectively assist learners by helping them to reach most suitable LOs according to their preferences, and tutors – by helping them to monitor, refine, and improve e-learning modules and courses according to the learners’ behaviour.     

A stochastic Kaczmarz algorithm for network tomography

We develop a stochastic approximation version of the classical Kaczmarz algorithm that is incremental in nature and takes as input noisy real time data. Our analysis shows that with probability one it mimics the behavior of the original scheme: starting from the same initial point, our algorithm and the corresponding deterministic Kaczmarz algorithm converge to precisely the same point. The motivation for this work comes from network tomography where network parameters are to be estimated based upon end-to-end measurements. Numerical examples via Matlab based simulations demonstrate the efficacy of the algorithm.     

On a generalization of Bernstein polynomials and Bézier curves based on umbral calculus

In Winkel (2001) a generalization of Bernstein polynomials and Bézier curves based on umbral calculus has been introduced. In the present paper we describe new geometric and algorithmic properties of this generalization including: (1) families of polynomials introduced by Stancu (1968) and Goldman (1985), i.e., families that include both Bernstein and Lagrange polynomial, are generalized in a new way, (2) a generalized de Casteljau algorithm is discussed, (3) an efficient evaluation of generalized Bézier curves through a linear transformation of the control polygon is described, (4) a simple criterion for endpoint tangentiality is established.     

Solving a multi-floor layout design model of a dynamic cellular manufacturing system by an efficient genetic algorithm

This paper presents a mixed-integer programming model for a multi-floor layout design of cellular manufacturing systems (CMSs) in a dynamic environment. A novel aspect of this model is to concurrently determine the cell formation (CF) and group layout (GL) as the interrelated decisions involved in the design of a CMS in order to achieve an optimal (or near-optimal) design solution for a multi-floor factory in a multi-period planning horizon. Other design aspects are to design a multi-floor layout to form cells in different floors, a multi-rows layout of equal area facilities in each cell, flexible reconfigurations of cells during successive periods, distance-based material handling cost, and machine depot keeping idle machines. This model incorporates with an extensive coverage of important manufacturing features used in the design of CMSs. The objective is to minimize the total costs of intra-cell, inter-cell, and inter-floor material handling, purchasing machines, machine processing, machine overhead, and machine relocation. Two numerical examples are solved by the CPLEX software to verify the performance of the presented model and illustrate the model features. Since this model belongs to NP-hard class, an efficient genetic algorithm (GA) with a matrix-based chromosome structure is proposed to derive near-optimal solutions. To verify its computational efficiency in comparison to the CPLEX software, several test problems with different sizes and settings are implemented. The efficiency of the proposed GA in terms of the objective function value and computational time is proved by the obtained results.     

Hybrid shuffled frog leaping algorithm for energy-efficient dynamic consolidation of virtual machines in cloud data centers

Cloud computing aims to provide dynamic leasing of server capabilities as scalable virtualized services to end users. However, data centers hosting cloud applications consume vast amounts of electrical energy, thereby contributing to high operational costs and carbon footprints. Green cloud computing solutions that can not only minimize the operational costs but also reduce the environmental impact are necessary. This study focuses on the Infrastructure as a Service model, where custom virtual machines (VMs) are launched in appropriate servers available in a data center. A complete data center resource management scheme is presented in this paper. The scheme can not only ensure user quality of service (through service level agreements) but can also achieve maximum energy saving and green computing goals. Considering that the data center host is usually tens of thousands in size and that using an exact algorithm to solve the resource allocation problem is difficult, the modified shuffled frog leaping algorithm and improved extremal optimization are employed in this study to solve the dynamic allocation problem of VMs. Experimental results demonstrate that the proposed resource management scheme exhibits excellent performance in green cloud computing.