Hardness-stress-strain correlation in aluminium—A simpler alternative to visioplasticity in metal forming

Local stress and strain variations in the deformation zone can be ascertained by measuring hardness. Hardness is correlated with strain and stress. The expressions discussed later are useful in determining the local variations in stress and strain from hardness measurement. It is a simple method compared to visioplasticity. One can estimate the forces required for a forming process. It helps in the choice of equipment, design of tooling and selection of lubricant for the particular process.     

影响DT岩石粉状铵梯炸药爆速的因素探索

文章从ＤＴ岩石粉状铵梯炸药的原材料细度，复合油相，混药时间，投料顺序，混药药温，装药密度等方面，探讨了该炸药爆速的影响因素。     

分偏移距动校正方法的改进

在地震资料处理中，速度分析和动校正对资料品质的影响很大。由于动校正速度是随偏移距变化而变化的，而常规速度分析并没有考虑这一因素，动校正效果往往不是很理想，从而影响资料的叠加和成像效果。分偏移距动校方法是在不同偏移距上采用不同的速度进行动校正。但由于是在不同偏移距组上分别独立进行速度分析和动校正，因此不能将不同偏移距组的同一反射同相轴校正到同一to层位上。这样就需要进行繁琐的后续处理，而且还会降低同相轴的连续性和平滑性。为此，对该方法进行了一些改进，即固定to在不同的分偏移距段进行速度扫描，段与段之间的衔接问题采用平滑处理解决。理论模型分析表明，采取上述改进措施后，动校正效果得到了一定提高，改善了同相轴的连续性和平滑性。     

智能仪表在钻机控制方面的应用

以ADμC812型8位单片机为核心,开发了适用于钻机控制中反馈信号测量的智能仪表。针对现场钻机控制系统在测量反馈信号时受到的干扰,提出了有效的解决方案。实现了对钻机绞车快绳线速度、拉力反馈信号的精确测量、显示,及把测量数据通过串口向计算机传输、存储的功能。     

A Study on the Model of Forecasting System about the Actual Telephone Occupation in the Lead Development

ＡＳｔｕｄｙｏｎｔｈｅＭｏｄｅｌｏｆＦｏｒｅｃａｓｔｉｎｇＳｙｓｔｅｍａｂｏｕｔｔｈｅＡｃｔｕａｌＴｅｌｅｐｈｏｎｅＯｃｃｕｐａｔｉｏｎｉｎｔｈｅＬｅａｄＤｅｖｅｌｏｐｍｅｎｔ￥ＸｉｅＳｈｉｃｈａｎｇ；ａｎｄＸｉｅＸｕｅｍｅｉ（Ｄｅｐａｒｔｍｅｎｔｏ...     

Sound-velocity measurements for HFC-134a and HFC-152a with a spherical resonator

A spherical acoustic resonator was developed for measuring sound velocities in the gaseous phase and ideal-gas specific heats for new refrigerants. The radius of the spherical resonator, being about 5 cm, was determined by measuring sound velocities in gaseous argon at temperatures from 273 to 348 K and pressures up to 240 kPa. The measurements of 23 sound velocities in gaseous HFC-134a (1,1,1,2-tetrafluoroethane) at temperatures of 273 and 298 K and pressures from 10 to 250 kPa agree well with the measurements of Goodwin and Moldover. In addition, 92 sound velocities in gaseous HFC-152a (1,1-difluoroethane) with an accuracy of ±0.01% were measured at temperatures from 273 to 348 K and pressures up to 250 kPa. The ideal-gas specific heats as well as the second acoustic virial coefficients have been obtained for both these important alternative refrigerants. The second virial coefficients for HFC-152a derived from the present sound velocity measurements agree extremely well with the reported second virial coefficient values obtained with a Burnett apparatus.Paper dedicated to Professor Joseph Kestin.     

Brief Overview of Recent Developments on Negative Phase–Velocity Mediums (alias Left–Handed Materials)

This brief overview covers a rapidly occurring development in the area of microwave composite materials: isotropic dielectric–magnetic mediums wherein the phase velocity vector and the time–averaged Poynting vector are oppositely directed. Such materials have also been inappropriately designated as left–handed materials. Ramifications for aberration–free lenses, homogenization approaches, and complex mediums are also presented.     

高精度合成地震记录制作技术研究

制作高精度的合成地震记录是精细储层描述的基础，本文在分析合成地震记录原理的基础上，从地震剖面的极性判断、平均速度的选取，反射系数的准确提取，子波的精确估算等方面对制作合成记录的要点进行了分析，通过提高以上四方面的精度，提高了制作合成地震记录的精度，并提出了一套可行的合成地震记录的检查方法。     

热舒适条件下环境风速和温度最佳组合的实验研究

文章从人体与热环境的基础理论出发，着重对影响人体与环境之间对流换热的主要因素———温度和气流速度进行了实验研究，并得出相应结论，给出了热舒适条件下二者的最佳组合数学模式。     

基于激光多普勒测速法的2×106m/s2高冲击校准技术

在高冲击传感器动态性能校准中,实现高量程、宽脉冲激励是目前高冲击校准急需解决的问题。采用速度改变法校准原理,以气炮为激励源,利用激光多普勒测速方法测量砧体运动速度,建立高冲击校准系统。分析碰撞系统的作用原理,提出调整和控制激励脉宽的方法;分析测速误差,提出双光束差动侧向测速方法。实验结果表明:高冲击校准系统校准量程为2×106m/s2,激励脉宽在2×106m/s2时大于100μs,校准冲击灵敏度的扩展不确定度小于5%(k=2)。