Off-line optimization and control for real time integration of a three-phase hydrogenation catalytic reactor

In order to develop and test the integration procedure, in this paper a real time process integration involving the optimization and control of the process is presented, in this case, with the two-layer approach. The used optimization algorithms were Levenberg–Marquardt and SQP that solve a non-linear least square problem subject to bounds on the variables. The two-layer approach is a hierarchical control structure where an optimization layer calculates the set points and manipulated variables to the advanced controller, which is based on the dynamic matrix control with constraints (QDMC). The non-isothermal dynamic model of the three-phase slurry catalytic reactor with appropriate solution procedure was utilized in this work (Vasco de Toledo, E. C., Santana, P. L., Maciel, M. R. W., & Maciel Filho, R. (2001). Dynamic modeling of a three-phase catalytic slurry reactor. Chemical Engineering Science, 56, 6055–6061). The model consists on mass and heat balance equations for the catalyst particles as well as for the bulk phases of gas and liquid. The model was used to describe the dynamic behavior of hydrogenation reaction of o-cresol to obtain 2-methil-cyclohexanol, in the presence of a catalyst Ni/SiO₂.     

Numerical Simulation of Oil‐water Hydrocyclone Using Reynolds‐Stress Model for Eulerian Multiphase Flows

A three‐dimensional oil‐water turbulent flow and oil separation process in a double‐cone liquid‐liquid hydrocyclone (LLHC) is numerically simulated using FLUENT software. The Euler‐Euler approach and Reynolds‐stress model are combined and adopted in this simulation to handle the challenging situation of anisotropic turbulent two‐phase flow with a higher volumetric ratio (over 10%) in the dispersed phase. It is visualized well in the simulation how separation, aggregation and shift of oil and water proceed in the LLHC. The oil separation efficiency is determined based on flow field and phase concentration distribution. The simulation is verified by comparing predicted and measured separation efficiency in the LLHC.     

TD-LTE与TD-SCDMA切换判决机制的探究与仿真

不同网络之间的切换问题是网络间互操作的重要组成部分,尤其是当前备受关注的TD-LTE与TD-SCDMA的切换问题。该文在对常规切换机制剖析的基础上,通过详尽的理论分析,根据现有切换机制的不足,提出了新的切换判决算法机制。新机制中结合了多属性切换判决中的层次分析算法和二维函数收益法,考虑了移动用户的业务喜好,并使用Matlab搭建了网络模型着重针对数据业务进行仿真,根据不同的网络收益值来实现切换的选择,验证了数据业务切换判决算法的有效性。     

A discrete model for non-wetting liquid flow from a point source in a packed bed under the influence of gas flow

A study of non-wetting flow in a packed bed under the influence of gas flow has been carried out. Departing from the usual continuum models, a discrete and deterministic model for liquid flow has been presented to model the liquid flow from single and multiple point sources. Liquid flow is modelled based on force balance approach considering gas drag, bed resistance and gravity forces. Gas flow is modelled using k-ε model for turbulent flow. An X-ray flow visualization technique, developed by our group, is used to study the liquid flow paths in the packed bed. Liquid flow path and velocity has been obtained for various liquid and gas flow rate. Flow paths obtained from the simulation results are in good agreement to those obtained from flow visualization procedure under various conditions. Also, liquid distribution at the bed bottom is reported and compared with the experimental results.     

语块教学法与语言输出能力的实验研究

文章根据Michael Lewis的语块理论,运用语块教学法进行了为期一年的教学实验,借以考证语块法对非英语专业大学生的输出性能力的作用。调查问卷和实验统计分析证明:语块法比传统的词汇教学方法更加有效地提升了学生的口头和书面表达能力,在流利性、地道性以及连贯性等方面都优于传统词汇教学方法。     

含三苯基膦结构可溶性超支化聚芳醚酮的合成与表征

以双（4–（对氟苯甲酰基）苯基）苯基氧化膦为A2单体,11,,1–三（4–羟基苯）乙烷为B3单体,通过A2＋B3方法合成了含三苯基膦结构可溶性超支化聚芳醚酮（HPEKKs）,有效地避免了凝胶化现象.通过改变A2/B3的比率改变HPEKKs的封端基团,并通过1H NMR和FTIR对其结构进行了表征.1H NMR测量羟基封端HPEKKs（HPEKK-OH）的支化度和氟原子封端的HPEKKs（HPEKK-F）支化度分别达到0.62和0.85.DSC测量HPEKK-OH和HPEKK-F的玻璃化转变温度分别为151℃和131℃.TGA测量HPEKKs在失重率为5%时热分解温度达到500℃以上.HPEKK-OH和HPEKK-F可以很好地溶解于N–甲基吡咯烷酮、N,N–二甲基乙酰胺和二甲基亚砜等多种有机溶剂.     

Robust parametric approach for tracking control of an air-breathing hypersonic cruise vehicle

To realize the stabilization and the tracking of flight control for an air-breathing hypersonic cruise vehicle, the linearization of the longitudinal model under trimmed cruise condition is processed firstly. Furthermore, the flight control problem is formulated as a robust model tracking control problem. And then, based on the robust parametric approach, eigenstructure assignment and reference model tracking theory, a parametric optimization method for robust controller design is presented. The simulation results show the effectiveness of the proposed approach.     

浅谈交际英语教学法与我国国情的结合

在英语广泛传播的现今,一些非英语国家在得到经济效益的同时,也面临着随之而来的文化危机.因此,英语教师在介绍英语语言和文化的同时,也应该认识到坚持和保护本民族文化的重要性.寻找既能提高学生英语水平,又能培养其民族归属感的英语教学法迫在眉睫,本文对当今比较流行的交际英语教学法如何与我国具体国情相结合进行了研究,并提出了几点建议.     

试论建筑理论研究的目的与方法——以范·德·拉恩的比例理论为例

以范·德·拉恩的比例理论为例,对建筑理论研究的目的和方法进行了探讨,结论是：建筑理论研究的根本目的,是从自然规律中提取若干可以指导实践的基本原则或者＂法则＂;为了获得这些法则,人们通常采用的是隐喻和分类,类比和还原等基本策略;在最指实的地方,往往可以得到一种禅宗所说的＂顿悟＂,从这个意义上说,任何真正的建筑理论都不是以神秘主义为直接目标的.     

零件可装配性评价技术研究

大规模定制模式下,产品采用面向装配的设计有利于快速响应市场和降低产品成本．详细分析影响零件可装配性的因素,针对大规模定制模式下充分提高零件的可装配性,提出零件可装配性的评价指标体系和模糊综合评价模型．依据提出的评价模型,开发了零件可装配性评价系统,作为设计人员进行零件可装配性在线评价的工具．