基于面像识别技术的公安网上追逃系统

研究了公安网上追逃系统的体系结构和系统的程序流程，阐述了ASP COM 后台比对服务的3层B／S模式面像网上比对的实现方法，最后给出系统的性能指标和特点。     

免振捣自密实混凝土技术在多层住宅中的应用

介绍了免振捣自密实混凝土的特点和质量控制措施，结合某小区自密实混凝土工程应用实例，阐述了该项施工技术，其经济和社会效益良好，提出了进一步发展该技术的若干设想。     

丙烯酸酯聚氨酯紫外固化凝胶生成动力学研究

采用丙烯酸酯聚氨酯和二苯甲酮/安息香乙醚复合光敏剂,对该体系紫外光固化反应的凝胶生成动力学进行分析。用红外光谱定量测定光聚合过程的变化,发现光聚合反应主要是以双键打开,交联为特征的,并得出1408cm~(-1)双键吸收峰随光照时间而变化的关系式:P_(c=c)=0.325 t~(0.135)。临界凝胶点可由双键反应程度与凝胶分数之间关系外推得到,凝胶点后,体系中存在一个凝胶与溶胶之间分配关系,此时凝胶与溶胶共存,凝胶中双键反应程度P_(A(g))>总双键反应程度P_A>溶胶中双键反应程度P_(A(S))。随着凝胶增加,P_A和P_(A(g))逐渐上升,而P_(A(s))下降。此体系的紫外固化实验工作曲线与理论值基本一致。     

轻便型γ能谱测井仪几个关键技术问题的探讨

为研制性能好，功能强，微机化学程度高的轻便型γ能谱测井仪，针对非油气测井工作的井口径小（〈φ６０ｍｍ）井身浅（〈１０００ｍ）等特点，探讨了γ能谱测井仪的轻便化，测量精度，信号传输技术，稳谱技术及微机化等关键技术问题。     

无源微波遥感用于地震预报的实验研究

对无源微波遥感用于地震预报在理论研究的基础上对不同岩性不同结构的岩石试件进行了加载实验，测量了岩石试件的微波辐射随载荷的变化．实验得出：岩石试件的微波辐射能量随岩石应力状态变化而显著变化；而且，不同的波段变化的幅度不同；同一波段不同极化方式的波随应力变化的变化量也不同；微波辐射能量的变化能够被卫星微波遥感探测器探测到．实验还发现，岩石试件临破裂前出现明显的微波辐射异常．     

Plasma immersion ion implantation for SOI synthesis: SIMOX and ion-cut

We have demonstrated feasibility to form silicon-on-insulator (SOI) substrates using plasma immersion ion implantation (PIII) for both separation by implantation of oxygen and ion-cut. This high throughput technique can substantially lower the high cost of SOI substrates due to the simpler implanter design as well as ease of maintenance. For separation by plasma implantation of oxygen wafers, secondary ion mass spectrometry analysis and cross-sectional transmission electron micrographs show continuous buried oxide formation under a single-crystal silicon overlayer with sharp Si/SiO₂ interfaces after oxygen plasma implantation and high-temperature (1300°C) annealing. Ion-cut SOI wafer fabrication technique is implemented for the first time using PIII. The hydrogen plasma can be optimized so that only one ion species is dominant in concentration and there are minimal effects by other residual ions on the ion-cut process. The physical mechanism of hydrogen induced silicon surface layer cleavage has been investigated. An ideal gas law model of the microcavity internal pressure combined with a two-dimensional finite element fracture mechanics model is used to approximate the fracture driving force which is sufficient to overcome the silicon fracture resistance.     

高压喷射注浆造防渗墙法在防洪工程中的应用

以景德镇城市防洪工程为例，对各种防渗方案进行了比较，阐述了高压喷射注浆造墙法适用的地质条件，以及控制工程施工质量的措施。     

On an invariance principle for unilateral contact at a bimaterial elastic interface

This paper examines the axisymmetric elastostatic problem related to the unilateral receding contact at a pre-compressed smooth bimaterial elastic interface. The separation at the interface is caused by the action of axisymmetric stress fields of unequal magnitude, which are applied at any location of the separate halfspace regions. The analysis of the problem focuses on the determination of the zone of separation as a function of the pre-compression, the magnitudes and locations of the axisymmetric stress fields inducing the separation, and the elasticity characteristics of the halfspace regions. It is found that the radius of the separation zone can be evaluated in explicit form. In the particular instance when the loadings applied at the surface of the halfspace regions are equal in magnitude and distribution, the analysis reveals that the radius of the separation zone is independent of the elasticity properties of the halfspace regions and can be evaluated in exact closed form.     

SISAK快速化学分离装置的建立

SISAK(Short-lived Isotopes Studies by the AKUFVE technique)技术是目前使用最广泛的快速化学分离方法之一,主要应用在短寿命核素的分离和鉴别、超重元素的人工合成以及化学性质研究等方面的工作中.本文简单地叙述了SISAK技术的流程、原理和发展现状,介绍了自行建立的国内第一套基于SISAK技术的快速化学分离装置,并通过从裂变产物中分离短寿命核素这一实例验证了SISAK技术在快速化学分离中的优越性.     

Production of biodiesel from waste fryer grease using mixed methanol/ethanol system

Transesterification of waste fryer grease (WFG) containing 5–6 wt.% free fatty acid (FFA) was carried out with methanol, ethanol, and mixtures of methanol/ethanol maintaining the oil to alcohol molar ratio of 1:6, and initially with KOH as a catalyst. Mixtures of methanol and ethanol were used for transesterification in order to use the better solvent property of ethanol and rapid equilibrium using methanol. Formation of soap by reaction of FFA present in WFG with KOH instigated difficulty in the separation of glycerol from biodiesel ester. To untangle this problem, two-stage (acid and alkali catalyzed) method was used for biodiesel synthesis. More than 90% ester was obtained when two-stage method was used compared to ∼ 50% ester in single stage alkaline catalyst. In the case of mixed alcohol, a relatively smaller amount of ethyl esters was formed along with methyl esters. Acid value, viscosity, and cetane number of all the esters prepared from WFG were within the range of the ASTM standard. Esters obtained from WFG showed good performance as a lubricity additive.