Strain rate sensitivity of tensile properties in high Nb containing TiAl alloys

The effect of strain rate on the yield strength of high Nb containing TiAl alloy was studied. The results show that the strain rate sensitivity varies with the test temperature, and the yield strength is not sensitive to the strain rate at room temperature but significantly sensitive to the strain rate at high temperature. An increase of the strain rate or a decrease of the temperature results in an obvious change of fracture mode. It is found that the strain rate sensitivity of this alloy varying with temperature is due to the dislocation climb generated at high temperature.     

钢包用滑板的热应力有限元分析

连铸钢包使用的滑动激光器是控制连铸生产过程的关键设备之一。为了确定501滑板使用中产生裂纹的原因，抑制裂纹形成，提高滑板使用寿命，本文应用有限元法进行了滑板热应力分析，并与生产中使用的滑板比较，有限元分析显示：在滑板材质一定的情况下，滑板形状以及滑板的预紧能力和固定方式是影响滑板使用寿命的基本因素。     

攀钢镀锌线退火炉辐射管应用特点及其性能分析

介绍了攀钢连续热镀锌机组中退火炉辐射管的应用特点，并对U型辐射管和W型辐射管的热效率、表面温度分布及使用寿命等技术性能进行了深入的分析。     

Intercomparison of Thermophysical Property Measurements on an Austenitic Stainless Steel

The results of an inter laboratory comparison of thermal conductivity, thermal diffusivity, specific heat capacity, and thermal expansion measurements on austenitic stainless steel in the temperature range between 20 and 1000°C are presented here. Mean values are presented for the physical properties studied. Reliable relative expanded uncertainties can be stated for the properties determined, which were achieved by applying good measurement practice, i.e., 3% for thermal expansion, 5% for specific heat capacity and thermal diffusivity, and 6% for thermal conductivity. The mean values derived from this intercomparison agree well with the results of a previous intercomparison in 1990. An erratum to this article is availabale at .     

组合式空调系统设计中机组选型方法探讨

对目前组合式空调机组在选型设计及使用中出现的问题进行了分析，运用空气处理设备选型的有关理论和计算方法，对舒适性空调系统中机组选型的一些问题和数据进行了简化和近似处理，提出了能够满足工程设计的要求的简便实用的选型方法。     

基于CMAC的电液负载模拟器自学习控制

通过建立某飞行器舵机电液负载模拟器与操舵系统联动的数学模型，分析了电液负载模拟器的多余力产生原理。提出了采用结构不变性原理设计补偿环节的基于CMAC神经网络的控制结构和算法。通过对系统的动态仿真表明，该方法可有效地抑制多余力，明显改善电液负载模拟器的动态加载性能。     

反应堆堆芯热功率测量方法及其误差分析

通过建立精确的数学模型 ,提出了一种测量核电站压水反应堆堆芯热功率的方法 ,并对该方法进行了误差分析。基于上述方法的KME系统与校验SAPEC系统的比较结果表明 ,该方法完全可以用于核电站堆芯热功率的测量     

A New Grade Carbon Black Produced by Thermal Plasma Process

This paper presents a new route about producing carbon black,by wich the natural gas cracking is carried out in the absence of oxygen thanks to an electric energy supply externally given by a plasma jet.The carbon black produced by this process has a narrow size distribution and a small average diameter of 38nm as well as a highly branched aggregate.The higher DBP value of 1.40ml/g shows it should be a high structure carbon black.The FTIR spectra shows that there are lots of aromatic c-c bonds and a large amount of nitrogen-coutaining functional groups on the carbon blacks surface,such as-NH,-CN as we3ll as -CH,-OH,-COOH groups.     

万家寨水电站经济运行的措施

针对黄河近几年来水量逐年减少和电力市场的变化 ,对提高万家寨电站的经济运行效益问题 ,进行了分析     

九江三期1号主变出厂冲击试验失败原因及处理

九江三期发电工程采用两台 4 4 5MVA主变压器 ,分别将两台 35 0MW发电机的 2 3kV出口电压升高到 2 2 0kV接入升压站。其中 1号主变压器在制造厂进行冲击试验时 ,两相高压绕组发生绝缘击穿 ,未通过冲击试验。针对该变压器的此次冲击试验造成的损坏部位及形成原因进行分析 ,找出变压器的绝缘设计和制造工艺上的缺陷 ,提出处理措施 ;另一方面通过比较此次雷电冲击电压与操作冲击电压对变压器绝缘损坏的部位的不同 ,判断这两种冲击试验对变压器不同部位绝缘检测的有效性