分时控制MOSFET固态高频感应加热电源研究

研究了一种采用分时控制方法的MOSFET固态高频感应加热电源,电源输出频率是功率器件工作频率的n倍(采用n个桥分时工作)。利用MATLAB/SIMULINK实现了分时控制的仿真,分析了分时控制的工作状态,对器件功耗进行了理论推导,并对如何实现分时控制进行了介绍,且根据仿真画出了并行控制和分时控制2种控制方式下MOSFET器件损耗的曲线图。仿真结果表明分时控制在实现固态感应加热电源的高频化方面优于并行控制。     

基于JMY-502模块的IC卡读写器的设计

随着非接触IC的大量使用,其成本越来越低。可以用单片机和IC读写模块来设计IC卡读写器,读写器分两种,一种是连接微机的,主要应用在收费管理部门,另一种是应用于现场收费部门,一般只具有自动收费功能。介绍了一种基于JMY-502的IC卡读卡器的设计,JMY-502是PHILIPS公司生产的微型嵌入式非接触式IC卡读写模块。给出了两种读卡器的硬件原理图及程序框图,读卡器实现了射频卡的制卡、收费及充值等功能,设计方案简单、成本低,适合各种收费场合。     

基于单片机的病房无线呼叫系统设计

为解决传统病房有线呼叫系统存在的布线复杂、易出故障、维修不便、不能在现有床位基础上及时增加新床位信息等问题,提出了无线呼叫系统设计。采用STC89C52系列单片机作为主控芯片,nRF905作为无线收发的核心芯片,并配以相应的LCD显示屏和声光报警器,设计出了无线病房呼叫系统。结果表明,该系统可靠传输距离达90 m以上,具有一定的抗干扰性,且可以临时方便增加床位显示信息,能够满足医院的临时实际需求。该系统性能稳定,操作简便,可以有效代替传统有线呼叫系统。     

2500m^3高炉基础自动化系统构成

介绍新钢2×2500m^3高炉基础自动化系统各个子系统的构成,以及环形网络的构成及配置方法。     

A novel initial ranging algorithm for OFDMA systems using smart antenna

To improve the capacity of initial ranging （IR） users simultaneously accessing into network and enhance the performance of the IR, a novel IR algorithm is presented for the orthogonal frequency division multiple access systems with the smart antenna. The beamforming weight vectors provided by the antenna array are introduced for the IR users, and the procedures of the multiuser parameter estimation and the interference cancellation are designed. The proposed method can improve the accuracy of the channel estimation of active paths and efficiently reduce the residual multiple access interference. Simulation results show that the proposed method has a much better performance than the available successive multiuser detection and interference cancellation algorithm and accommodates more active ranging users simultaneously accessing into a cell.     

轧钢冷床上卸钢系统改造

介绍运用变频、PLC、液压技术对轧钢冷床上卸钢系统进行改造。     

V型滤池电气自控系统应用分析

从控制网络的选择、机泵阀门设备的控制、供电系统设计及电气线缆布置等方面,介绍滤池电气控制系统的优化,以更好地实现滤池自动化控制.     

Design of a broadband dielectric resonator antenna and its application in low sensitivity frequency beam‐scanning array with wide scanning angle and suppressed sidelobes

In this paper, a broadband dielectric resonator antenna (DRA) with a simple H‐slot feeding structure is proposed. The broad bandwidth (~45%) and uni‐directional radiation enable this DRA suitable to work as a radiation element in the construction of a beam‐scanning array with not only low frequency sensitivity which is important for accurate angle estimation of in‐coming targets, but also a wide scanning range. Moreover, stable coupling coefficients are established around all the above three resonances with respect to its corresponding feeding line, ensuring a low sidelobe level (SLL) across the whole operating frequency range. In order to realize such a DRA, a latticed rectangular structure is utilized to generate the lower two resonances, while the upper resonance is generated by its H‐shaped feeding slot. The shape of the latticed dielectric resonator is also modified according to a 3‐D printed fixing structure for an accurate installation. A 20‐element beam‐scanning prototype is demonstrated and manufactured. The range of scanning angle is from ?36° to +13° within the bandwidth of 10 to 16 GHz, corresponding to a frequency sensitivity of only 122.5 MHz/^o. The achieved SLL are smaller than 19 dB for all scanning beams. The above performance indicates that, this array is very suitable for near‐range radar systems requiring an accurate angle estimation.     

一种双U形缺陷地结构低通滤波器的设计

基于双U形缺陷地结构设计了一种低通滤波器。首先利用三维电磁场仿真软件分析了双U形DGS结构的S参数频响特性,然后利用该DGS结构加工制作了DGS结构低通滤波器,实验室测得该滤波器3 dB截止频率为3．26 GHz,通带范围内波纹最大是0．4 dB。插入损耗大于20 dB的阻带宽度为5．2 GHz。     

“双储”模式下的节能控制在小区供水系统中的应用

根据城市居民对供水的可靠性、稳定性、经济节能性的需求,课题组提出了一种基于"双储"模式的供水系统,并按照本市德胜住宅小区的供水要求,设计了一套由储水池、气压罐、变频器、多台水泵机组等主要设备构成的全自动变频恒压供水系统.经过近半年的运行测试,系统有效地解决了传统供水方式中存在的问题,增强了系统的总体性能,有明显的节能效果.