低温甲醇洗技术在20万 t/a 甲醇装置中的应用

简单介绍了上海焦化总厂２０万ｔ／ａ甲醇装置中低温甲醇洗脱硫脱碳技术的应用情况。经过一年多的稳定运行，证明该技术工艺先进成熟，净化气质量稳定，满足生产需要，在以煤为原料的煤气脱硫脱碳中的应用是成功的。     

孤东油田二区聚合物驱工程可行性研究

孤东油田二区开发单元,目前已进入特高含水开发阶段,由于油层非均质性及驱替水与油层内流体流度比制约着注入水的驱油效果,水驱采收率不高。针对二区油藏特点及水驱开发现状,决定开展聚合物驱可行性研究。     

利用俄罗斯石油和天然气资源的有关问题探讨

针对我国石油、天然气资源短缺的实际状况，分析了俄罗斯远东地区石油、天然气资源在数量、品质和地理环境等方面存在的优势，对我国利用俄罗斯远东地区原油、天然气资源，拓展石油，天然气资源供应来源，提高国家石油战略安全的可能性和必要性进行了初步的探讨。     

An analysis,design and tuning of Cascade Control Systems in the presence of constraints in actuator and process outputs

In the presence of rate constraints in actuator, design of cascade controller based on the primary controller conditional integration can result into closed-loop system oscillations. Stability analysis, performed by the describing function technique and confirmed by simulation, demonstrates that the solution based on the Anti-Reset Windup Cascade Control System (ARW CCS) structure is successful. Design and tuning of the ARW CCS secondary controller is a standard ARW single-input single-output problem. In the present paper tuning is proposed for the ARW CCS primary controller. For the serial process modeling simple rules are derived and confirmed by experimental results, obtained on a drum type boiler of a 210 MWe lignite coal fired unit. General design of the ARW CCS is based on the parallel process modeling and optimization of the primary controller. Optimization is performed in the frequency domain, under constraints on the maximum sensitivity, multiplicative uncertainty bound and sensitivity to measurement noise. Simulation and experimental results on a laboratory thermal plant demonstrate effectiveness of the proposed optimization.     

Modelling Gas Holdup in Flotation Column Froths

A one‐dimensional steady‐state model is developed for the prediction of axial variation of the gas holdup in flotation column froths. Froth is considered as an inverse fluidized bed of bubbles and hence the frictional pressure gradient is obtained based on the energy balance. Pressure gradient can also be obtained from the Ergun equation with adjustable constants. The model correctly captures the effect of superficial gas velocity, superficial liquid velocity and bubble diameter on the variation of the gas holdup along the froth height. The predictions of the model are in agreement with the experimental data from the literature.     

两类昆虫生长调节剂作用机制的比较

两种昆虫生长调节剂——几丁质合成抑制剂和非舀类蜕皮激素类似物虽然都是作用于蜕皮过程，但有着截然不同的作用机制，本文对这两种杀虫剂作用机制的研究进展进行了总结和比较。     

Influence of modified forms of urea and nitrogen levels on weed growth and grain yield of lowland rice

The growth of weeds and their subsequent reduction of rice yield as affected by N source neem cake coated urea (NCU), dicyandiamide coated urea (DCU), rock phosphate coated urea (RPCU), urea supergranules (USG) and prilled urea (PU) was studied on a clay loam soil at Coimbatore, India. Experiments were conducted in northeast monsoon (NEM) 1981, summer 1982, and southwest monsoon (SWM) 1982 seasons.The crop was associated with eleven weed species, and the dominant weeds wereEchinochloa crus-galli, Cyperus difformis andMarsilea quadrifolia. The weed flora varied between seasons. Deep placement of USG reduced the dry weight of weeds in NEM and summer seasons at 60, 90 and 120 Kg N ha^–1 whereas it increased the dry weight at 60 and 90 but not 120 Kg N ha^–1 in SWM season. The dry weight of weeds decreased with increased N rates for all N sources during NEM and summer seasons. In SWM season, dry weight of weeds increased with increased N rates for all N sources except USG. The grain yield of rice was drastically reduced with the deep placement of USG at 60 but not 120 Kg N ha^–1 in SWM season. The differential effect of the N sources between seasons was due to the change of the weed flora. Dominance ofE. crus-galli during SWM season had greater influence on weed dry weight and grain yield of rice.Nitrogen uptake by weeds was frequently greater in unfertilized plots, particularly in NEM and summer seasons. In SWM season, the apparent fertilizer N recovery by weeds was high for USG. It decreased from 53% for 60 Kg USG-N ha^–1 to 4% for 120 Kg USG-N ha^–1.Contribution from the part of Ph.D. work of the first author at Department of Agronomy, Tamil Nadu Agricultural University, Coimbatore-641 003, Tamil Nadu, India.     

化学镀镍-磷合金机理的研究

通过对化学镀Ni—P合金过程中线性极化电阻及沉积速度的测量,得出极化电阻的倒数1/Rp与电流密度i呈线性关系。用阳极极化曲线的方法,较详细地研究了次磷酸钠在镍电极上的氧化过程。提出了化学镀Ni—P合金是按电化学机理进行的。     

基于NHPP类软件可靠性通用模型研究与应用

对现有NHPP类软件可靠性模型进行分析总结,指明了已有NHPP类软件可靠性模型存在的不足及缺陷。综合考虑缺陷探测率、软件运行覆盖率、排除错误时的错误引入率等软件故障数的影响因素,提出了一种通用的NHPP类软件可靠性模型,最后对通用模型中的泛函数取特殊值后,求得期望故障数及软件可靠度,并对其进行分析,证明了所提模型的有效性。     

淤浆鼓泡床中固体粒子的悬浮特性

研究了三相鼓泡床中的临界固含率,以空气作气相,水、乙醇-水、丙酮-水、萜松醇-二甲苯作液相,石英砂、煤、雷奈镍作为固相。分析了鼓泡柱的高径比、气体速度、固体粒子的大小和比重、液体的粘度对临界固含率的影响,提出了含有这些参数的无因次数群的关联式,讨论了本文提出的关联式和文献报导的差别。