中置式高压电容器柜改进设计

分析了南屯煤矿白马河风井变电所高压电容器柜原设计方案存在的问题,并对其进行了改进设计:选用适用于容性负载的真空断路器;添加放电线圈,并将放电线圈与电容器直接并联,使放电线圈与电容器组成一个完整的放电回路;添加接地开关,接地开关既有机械闭锁又有电气联锁,操作方便,安全性高。实际应用表明,改进设计后的高压电容器柜功能更加完善,更加安全、可靠。     

配电网短路故障分析及其识别方法研究

分析了在不同中性点接地方式下单相接地和两相短路接地故障的相电压及中性点电压变化特征,结合三相短路和两相短路的故障特征,提出了完整的配电网短路故障识别方法。仿真结果表明,该方法具有采集的模拟量少、判据简单、运算简便的优点,具有一定的实用价值。     

Microwave surface resistance of epitaxial YBa2Cu3O7 thin films at 18.7 GHz measured by a dielectric resonator technique

We used a dielectric resonator technique for highly sensitive measurements of the temperature dependence of the microwave surface resistanceR _s of 1×1 cm² superconducting films at 18.7 GHz. It consists of a sapphire disc positioned on the film under investigation within a copper cavity which is acting as a radiation shield. In the TE₀₁ oscillation mode the highly reproducible quality factor of about 10⁵ results in a sensitivity of ±50 forR _s measurements. The temperature dependence ofR _s can be measured up to values as high as 1 . We have investigated several YBa₂Cu₃O₇ thin films prepared by high oxygen pressure d.c. sputtering on LaAlO₃ and NdGaO₃. Our best films exhibit a pronounced nonlinear behavior of the d.c. resistivity(T) with(300K)/(100K) values of about 3.7. Those films show, besides the initial fall-off just belowT _c , a further strong decrease ofR _s at low temperatures. This was observed both at 18.7 GHz and 87 GHz, as measured by a conventional cavity end plate replacement technique. ForTT_c/2 these films exhibit an exp (–T _c/T) dependence ofR _s with-values around 0.4. These observations may be explained by a superconducting energy gap with 2/kT _c0.8 for charge carriers localized in the CuO chains for YBa₂Cu₃O₇.     

全封闭大功率永磁牵引电机的温度场数值计算

为研究全封闭大功率永磁牵引电机额定工况下的稳态温度场,以一台额定功率为815 kW的永磁同步牵引电机为研究对象,依据成型绕组槽部导热模型,建立了整机三维温度场共轭传热计算模型。考虑旋转磁化、冲压过程和磁密高阶谐波对定子铁耗的影响,以及水套-定子铁心间接触热阻抗对电机温升的影响,采用Fluent软件对电机额定工况下的稳态流场与温度场求解,使用电阻法和埋置检温计法（ETD）测得电机在额定工况下绕组的平均温升、铁心测点和绕组端部测点局部温升,绝对误差分别为-3.7 K、-0.3 K和7.6 K。进一步分析了电机水路和内风路流场分布特性、水套-定子铁心间接触间隙对绕组平均温升的影响以及槽内绕组附近的温升分布情况,最后提出了该类电机冷却系统设计优化方向。     

纳米Cr颗粒对Ni-Mo复合镀层性能的影响

为了研究纳米Cr颗粒对Ni-Mo复合镀层性能的影响,采用脉冲电沉积方法制备具有不同Cr含量的Ni-Mo复合镀层.利用扫描电子显微镜和X射线衍射仪分别观察和分析复合镀层的组织形貌及结构.采用电化学测试和X射线光电子能谱研究复合镀层的析氢性能和耐蚀性能.结果表明:随着镀液中纳米Cr颗粒含量的增加,镀层晶粒得到细化,析氢过电位增大,复合镀层析氢性能得到提高;当镀液中纳米Cr颗粒含量为20 g/L时,复合镀层表面钝化膜中MoO₃含量较高,且可与Cr产生协同效应,因而复合镀层具有较好的耐蚀性能;但随着镀液中纳米Cr颗粒含量的进一步增加,复合镀层中沉积的Cr元素含量降低,复合镀层的析氢性能和耐蚀性能均降低.因此,当镀液中纳米Cr颗粒含量为20 g/L时,复合镀层具有较好的析氢性能和耐蚀性能.     

计及护层环流的电缆温升分析与故障定位方法研究

由于传统IEC热路法无法计算复杂工况下环流变化后电缆温度,因此,采用有限元法并结合电磁场与传热学原理,针对不同接地方式与运行工况下的三相电缆,计算与分析不同常见护层故障下环流变化后的电缆温升情况,为电缆运行状况判断提供参考。结果表明:对于护层交叉互联接地电缆,交叉互联箱进水地或护层接头故障后,故障相电缆温升高达10℃,且故障相电缆在故障点前后出现5℃的温差;对于护层单端接地电缆,发生两相护层故障后,故障点前段电缆较正常运行温升高达13℃以上,故障点前后段电缆存在10℃的温差;三相电缆温升及各相之间温差情况可为电缆温度在线监测提供参考,并根据电缆前后温差出现点对电缆故障点进行定位,尽快检修处理,从而减少后续击穿烧毁事故的发生。     

基于多分量融合的调度端小电流接地选线策略

针对中性点不接地的配电系统站端接地选线方式投资大、维护成本高,零序电流采样监测运行维护困难的问题,提出一种基于多分量融合的调度端小电流接地选线方法。首先,在现有调度自动化系统监测数据集中,针对性分析了对接地故障较为敏感的单分量特征及其影响因素;其次,综合考虑实际运行可靠性和判断准确性,提出了基于三角模融合的接地选线判据;进而通过归一化计算各线路接地概率,实现在调度端远程的故障线路准确选线;最后,通过在某电力公司实际部署基于所提方法的小电流接地选线功能模块进行实测验证。运行结果显示,所提方法具有良好的选线成功率,能够较好支撑调度端的远程故障定位,具有较高的推广价值。     

采用VSG策略的MMC阻抗建模及并网稳定性分析

随着分布式能源并网的增多,局部电网逐渐呈现出弱电网特性,虚拟同步发电机（VSG）控制由于可以模拟同步发电机的特性,能够为弱电网提供惯性和阻尼支撑。本文采用谐波线性化方法对采用VSG控制策略的模块化多电平换流器(MMC)进行阻抗建模。所得到的阻抗模型在低频段主要呈容性,在高频段主要呈感性,在复杂电力系统中,可能会与电网阻抗存在谐振点。分析了VSG主要控制参数对MMC阻抗的影响,发现有功-频率下垂系数、阻尼系数和虚拟转动惯量主要影响50Hz附近的阻抗。根据阻抗稳定性判据对MMC并网系统进行稳定性分析,发现并网系统在高频段有振荡的风险。     

Real-Time Monitoring the Effect of Cytopathic Hypoxia on Retinal Pigment Epithelial Barrier Functionality Using Electric Cell-Substrate Impedance Sensing (ECIS) Biosensor Technology

Disruption of retinal pigment epithelial (RPE barrier integrity is a hallmark feature of various retinal blinding diseases, including diabetic macular edema and age-related macular degeneration, but the underlying causes and pathophysiology are not completely well-defined. One of the most conserved phenomena in biology is the progressive decline in mitochondrial function with aging leading to cytopathic hypoxia, where cells are unable to use oxygen for energy production. Therefore, this study aimed to thoroughly investigate the role of cytopathic hypoxia in compromising the barrier functionality of RPE cells. We used Electric Cell-Substrate Impedance Sensing (ECIS) system to monitor precisely in real time the barrier integrity of RPE cell line (ARPE-19) after treatment with various concentrations of cytopathic hypoxia-inducing agent, Cobalt(II) chloride (CoCl₂). We further investigated how the resistance across ARPE-19 cells changes across three separate parameters: R_b (the electrical resistance between ARPE-19 cells), α (the resistance between the ARPE-19 and its substrate), and C_m (the capacitance of the ARPE-19 cell membrane). The viability of the ARPE-19 cells and mitochondrial bioenergetics were quantified with 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay and seahorse technology, respectively. ECIS measurement showed that CoCl₂ reduced the total impedance of ARPE-19 cells in a dose dependent manner across all tested frequencies. Specifically, the ECIS program’s modelling demonstrated that CoCl₂ affected R_b as it begins to drastically decrease earlier than α or C_m, although ARPE-19 cells’ viability was not compromised. Using seahorse technology, all three concentrations of CoCl₂ significantly impaired basal, maximal, and ATP-linked respirations of ARPE-19 cells but did not affect proton leak and non-mitochondrial bioenergetic. Concordantly, the expression of a major paracellular tight junction protein (ZO-1) was reduced significantly with CoCl_2-treatment in a dose-dependent manner. Our data demonstrate that the ARPE-19 cells have distinct dielectric properties in response to cytopathic hypoxia in which disruption of barrier integrity between ARPE-19 cells precedes any changes in cells’ viability, cell-substrate contacts, and cell membrane permeability. Such differences can be used in screening of selective agents that improve the assembly of RPE tight junction without compromising other RPE barrier parameters.     

基于多变量解耦控制的配电网单相接地故障集成化柔性消弧方法

随着静止无功补偿装置、柔性消弧装置、大功率逆变器等电力电子装备应用逐渐增多,配电网柔性化加快发展,但已有电力电子装备存在功能单一、成本高等问题.基于直流侧并接储能元件的直挂式级联H桥变流器,将多变量解耦控制方法与电流消弧方法相结合,实现柔性电力电子装备输出电流在dq0坐标系下的独立调节,使单套柔性电力电子装备同时集成配电网有功功率、无功功率双向流动控制,以及单相接地故障柔性消弧功能,有效提高电力电子装备的利用效率.理论分析以及功率控制和单相接地故障消弧建模仿真结果验证了所提方法的可行性.