Calculation methods for comparing the performance of pure and mixed working fluids in heat pump applications

Three methods for comparing cycle performance of working fluids, pure as well as non-azeotropic mixtures, are investigated for two applications and for two mixture pairs, HCFC22-CFC114 and HCFC22-HCFC142b, and their pure components. The methods differ in the way of calculating the heat exchange processes. They assume, respectively, equal minimum approach temperatures, equal mean temperature differences and equal heat transfer areas. Changes of coefficient of performance (COP) with composition are explained for all methods. It is shown that transport properties must be taken into account when making rigorous comparisons between working fluids. To predict the relations between fluids with high accuracy, one must use the method with equal heat transfer areas. By the method with equal mean temperature differences, the COP can be estimated with the same accuracy for mixtures as for pure fluids, and can be used for rough estimations of the COP level with different fluids. The method of equal minimum approach temperatures should be avoided for non-azeotropic mixtures.     

Ionic mass transfer measurements in the case of submerged multijets impinging on to a flat surface

In the case of submerged multijets impinging on to a flat surface, the limiting current densities were measured at microelectrodes, fixed flush with the target surface using diffusion controlled electrode reactions (i.e. reduction of ferricyanide ion). The height of the multijet distributor from the target surface (Y) was varied from 5 to 9 cm. The numbers of holes of the distributor (N) studied were 76 and 141. The variation of mass transfer data with radial distance reveals the existence of two different regions, i.e. the impingement region and the wall jet region. The mass transfer rate increased with increase in Y in the impingement region. The effect of Y is negligible in the wall jet region. Decrease in N decreases the mass transfer rate in both the regions. The data are correlated separately for the two regions.     

Influence of the surface conditions on permeation in the deuterium–MANET system

The condition of the surfaces is of crucial importance for the deuterium permeation through materials. In this work a study of the surface constants for the adsorption (σk₁) and release (σk₂) of deuterium under different surface conditions on the martensitic steel DIN 1.4914 (MANET) has been carried out. The growth of an oxide surface layer (Cr₂O₃) of about 25–30 nm in a MANET sample, heat treated in an oxidizing environment, compared to the bare MANET that have a ‘natural' oxide of about 5 nm has provoked a reduction of both the permeation rate and the recombination coefficient (about 3 orders of magnitude). In addition, the permeation governing process has changed from diffusion-limited to surface-limited. The measurements of the permeation rate of deuterium were performed by a gas-phase permeation technique over the temperature range 574–746 K and for deuterium driving pressures in the range from 3 to 10⁵ Pa.     

Artificial Neural Network Modeling of Osmotic Dehydration Mass Transfer Kinetics of Fruits

Artificial neural network (ANN) models were developed for the prediction of transient moisture loss (ML) and solid gain (SG) in osmotic dehydration of fruits using process kinetics data from the literature. ANN models for ML and SG were developed based on data over a broad range of operating conditions and ten common processing variables: temperature and concentration of osmotic solution, immersion time, initial water and solid content of the fruit, porosity, surface area, characteristic length, solution-to-fruit mass ratio, and agitation level. The trained models were able to accurately predict the outputs with associated regression coefficients (r) of 0.96 and 0.93, respectively, for ML and SG. These ANN models performed much better than those obtained from linear multivariate regression analysis. The large number of process variables and their wide ranges considered along with their easy implementation in a spreadsheet make them very useful and practical for process design and control.     

紧凑 Tokamak(球形环)聚变堆第一壁及中心导体柱上中子负荷及核热计算与分析

采用通用蒙特卡罗粒子输运程序ＭＣＮＰ／３８计算低环径比Ｔｏｋａｍａｋ（紧凑环或球形环）聚变堆第一壁及中心导体上的中子壁负荷分布和核热沉积分布，并与常规Ｔｏｋａｍａｋ堆第一壁上中子壁负荷分布和核热沉积分布进行比较、分析。结果表明，在中子壁负荷归一化为１ＭＷ／ｍ２时，与常规Ｔｏｋａｍａｋ相比，在低环径比Ｔｏｋａｍａｋ堆第一壁及中心柱表面上中子壁负荷分布峰值并不比常规Ｔｏｋａｍａｋ堆第一壁上的峰值高，而且低于低环径比Ｔｏｋａｍａｋ堆整个第一壁上的平均值，而中心柱上的核热沉积峰值稍高于常规Ｔｏｋａｍａｋ堆第一壁上的核热沉积峰值，但对较高中子壁负荷情况，中心导体柱上的核热沉积和辐照损伤仍可能是比较严重和值得特别研究的问题。     

Modeling the Absorption of Acidic Gases by Alkanolamine Solutions Incorporating Several Reactions

A general model, based on double film theory, is developed to study absorption with chemical reactions. In the liquid film region, the model is a set of differential equations that describe the mass transfer accompanying several chemical reactions; the resolution of the system is achieved by the finite difference method using an implicit scheme combined with Newton's method. Continuity equations and equilibrium coefficients are exploited in the treatment of the bulk region, which is based on the Newton‐Raphson method; the results are used directly as boundary conditions in the liquid film equations. Maxwell‐Stefan equations have been used as a rigorous approach in this model.     

Free convection and mass transfer flow of non-newtonian fluid with thermal diffusion effect

An analytical study is performed to examine the thermal diffusion characteristics of free convection and mass transfer flow in a non-Newtonian fluid (Walters, 1962: liquid B') past a uniformly accelerated infinite vertical plate in the presence of thermal diffusion. The expression for the velocity field is obtained by the Laplace transform technique. The influence of the Soret number (a thermal diffusion parameter) on the velocity field is extensively discussed with the help of graphs.     

浅议轨道交通直流牵引供电系统的构成及保护配置

介绍了城市轨道交通直流牵引供电系统的构成,详细叙述了直流牵引供电系统的主要电气设备及其连接方法,以及系统的运行方式.另外,还简单介绍了系统配置的直流保护以及保护原理和保护作用.     

Drying of Chestnuts (Castanea sativa Mill.) after Osmotic Dehydration with Sucrose and Glucose Solutions

Chestnuts were dehydrated by using a combined method of osmotic dehydration followed by air drying. Samples were osmotically pretreated with sucrose (60% w/w) and glucose (56% w/w) for 8 h, air-dried at temperatures of 45, 55, and 65°C, at a relative humidity of 30% and at a velocity of 2.7 m·s^-1 and the experimental data of the drying kinetics were obtained. Whole samples were dried with different peelings: (a) removal of endocarp and pericarp (peeled) and (b) additionally the internal rough surface (cut). In all cases, cut chestnuts show greater drying rates than peeled samples, indicating that a significant mass transfer resistance in the layer nearest to the surface takes place. Peeled samples pretreated with sucrose solutions behave in a similar way to untreated samples. For the rest of the samples, the cut samples osmotically treated with sucrose solutions and all the samples treated with the glucose solution, the drying rates decrease during drying. Drying kinetics are successfully modeled by employing a diffusional model that takes the shrinkage into account. The effective coefficient of water diffusion was evaluated and correlated with temperature. The quality of the final product was monitored by color change. In spite of the fact that the total color difference is not modified by the osmotic treatment, the L*, a*, and b* color coordinates of cut samples treated with sucrose and glucose solutions do undergo changes; the L* and a* coordinates change less than the b*.     

How Non-native Species in Lake Erie Influence Trophic Transfer of Mercury and Lead to Top Predators

Lake Erie's food web has been dramatically modified by exotic species. Both exotic dreissenid mussels and the round goby Neogobius melanastomus have shifted the food web from a pelagicbased to a benthic-based one, potentially creating a new pathway for contaminant transfer to top predators. Before the invasion of round gobies, few predators of dreissenids occurred in Lake Erie, allowing contaminants to be confined to these benthic organisms. The invasion of the round goby has produced a new pathway through which these contaminants can enter the food web. To characterize heavy-metal transfer through this new food web and to assess risk to humans, water, surficial sediment, dreissenid, round goby, and smallmouth bass Micropterus dolomieui samples were collected at three sites during summers, 2002 and 2003, and analyzed for total lead (Pb), total mercury (Hg), and methyl mercury (MeHg). In addition, we compared smallmouth bass Pb and Hg concentrations to those measured in 1993/1994, before round gobies were prevalent. Pb biodiminished and MeHg biomagnified through the food web to smallmouth bass; patterns were similar among our three sites. Total Pb concentrations in smallmouth bass were higher before the incorporation of round gobies into their diet. We attributed this decline to changes in food web structure, changes in contaminant burdens in prey, or declines in sediment Pb concentrations in Lake Erie. By comparison, Hg concentrations in smallmouth bass changed little, before and after the round goby invasion, possibly due to a shift in diet that increased growth. Despite a decline in sediment Hg concentrations in Lake Erie, smallmouth bass continued to accumulate Hg at historical rates possibly because of their high consumption rates of benthivorous round gobies. As smallmouth bass continue to consume round gobies during their lives, their Hg concentrations may well continue to increase, potentially increasing the risk of Hg contamination to humans.