TOP开关电源的设计与制作

利用TOP开关器件设计了一种高精度，输出电压可调的开关电源，并介绍了制作方法。     

通信用VRLA蓄电池可靠性指标及计算探讨

在说明通信局（站）电源系统对VRLA蓄电池组可靠性要求的基础上，阐述了为了达到电信设备的电压、电流需求，通过串联或串并联构成电池组的单体VRLA蓄电池应达到的可靠性指标。在确定单体VRLA蓄电池应达到的可靠性指标。在确定单体VRLA蓄电池可靠性参数时，可通过现场使用调查或加速寿命试验的办法来求得。在单体VRLA蓄电池可靠性指标过低的情况下，可通过多种冗余连接方式来提高电池组的可靠性。     

脉冲激光沉积SrBi2Ta2O9铁电薄膜电容特性研究

用ＰＬＤ方法成功地制备了ＳＢＴ铁电薄膜，并制作成Ｐｔ／ＳＢＴ／Ｐｔ薄膜电容器。ＳＢＴ薄膜的晶面取向以（００８）和（１１５）为主。在５Ｖ电压下，极化反转，并且得到较饱和的电滞回线，剩余极化强度和矫顽电场分别为８４μＣ／ｃｍ２和５７ｋｖ／ｃｍ。ＩＶ特性测试显示两个对称的双稳峰，并得到零电压下，面积为３１４×１０４μｍ２，厚度为０３５μｍ的电容器，电容约为５６０ｐＦ，介电常数约为６００。疲劳测试表明Ｐｔ／ＳＢＴ／Ｐｔ具有优良的抗疲劳特性。     

脉冲功率器件直流和动态热特性探测

介绍了针对影响微波脉冲功率器件可靠性的热性能问题，应用红外热分析技术。对比探测微波脉冲功率器件在动态和直流状态下的温度分布，峰值结温，热阻及其变化规律。     

二滩水电站地下厂房洞室的施工特点

国际承包商在二滩工程中的许多施工布置和方法，施工技术和工艺、施工设备和措施很具有特色，扩展了我们的视野、丰富的我们的思路。总结其经验，可作为国内类似工程的参考。     

太阳能热风发电技术研究进展

介绍了太阳能热风发电的产生背景、技术原理和特点。太阳能热风发电能够实现由太阳能到空气动能,最终到电能的转变,具有环保无污染、运行维护简单、缓解常规能源消耗等特点。简要介绍世界上第1座试验性质的太阳能热风发电站。对太阳能热风发电技术相关研究历程从试验研究和理论研究2个方面做了综述,重点介绍了澳大利亚电站的建设进展及最新相关学术研究进展,包括过渡段理论及试验研究、系统数值模拟和太阳能热风发电技术在高山地区的应用等。介绍我国太阳能资源情况,指出我国太阳能资源丰富,适合建造大型太阳能热风发电站。     

用户无功功率低压集中补偿方式探讨

主要研究了用户无功功率低压集中补偿的问题,简单介绍了目前国内普遍采用的低压集中补偿方式的基本原理及技术特点,着重分析了在设计、安装、调试、维护等方面需注意的问题及处理措施。     

Fast‐scale bifurcation in power‐factor‐correction buck‐boost converters and effects of incompatible periodicities

In this paper, we derive the discrete‐time model for the power‐factor‐correction (PFC) buck‐boost converter in terms of a stroboscopic switching map. Fast‐scale instability is analysed through a fold diagram, which exposes the periodicity of the operation as well as the locations of the critical phase angles of the line voltage at which instability begins to occur along a half‐line cycle. The asymmetrical locations of the critical phase angles along a half‐line cycle is explained in terms of ‘under‐developed’ bifurcation. Border collision bifurcations are observed and analysed in detail. Copyright © 2006 John Wiley & Sons, Ltd.     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014