Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

用人工神经网络预测混杂复合材料混杂效应

本研究建立一个二输入单输出的BP人工神经网络模型，并用QBASIC语言编制了相应的软件。利用该神经网络模型对混杂效应与混杂比及分散度系数间关系进行了预测。研究结果表明，网络经过61223次的迭代，预潮值误差为0．12％，具有很高的预测精度，可用于混杂复合材料混杂效应的预测。     

A highly stable and efficient catalyst for direct synthesis of LPG from syngas

Liquefied petroleum gas (LPG) fuel was directly synthesized from syngas over a hybrid catalyst which contained a methanol synthesis catalyst and zeolite. The new hybrid catalyst composed of (Pd–Ca/SiO₂) and β-zeolite, showed a high activity and selectivity for LPG production. X-ray diffraction (XRD) characterization of the catalyst was used to analyze the deactivation of (Pd–Ca/SiO₂)/β-zeolite.     

三乙胺对丙烯酸酯-聚氨酯复合乳液的影响研究

采用原位乳液聚合法，合成聚氨酯-丙烯酸酯(PUA)复合乳液。通过粒径分析、黏度测定、力学测试等手段，研究了三乙胺对乳液性能和相行为变化等的影响。实验结果表明：随着中和度提高，乳液外观改善，贮存稳定性提高，吸水率增大，耐水性降低，拉伸剪切强度增大，而断裂伸长率降低，相转变点后延。     

Destabilizing interactions between the partners of a bifunctional fusion protein

Hybrid MalE–GVP is a bifunctional protein in vitro sinceit binds maltose as protein MalE of Escherichia coli and sinceit is dimeric and specifically binds single-stranded DNA asprotein GVP of phage M13. The oxidation rate of a unique cysteineresidue was used to compare the stabilities of GVP in its freeand hybrid forms, under conditions where MalE was either foldedor unfolded by a denaturing agent. The results showed that boththe covalent link and tertiary non-covalent interactions betweenMalE and GVP destabilized GVP in MalE–GVP. To test whetherGVP had identical structures in its free and hybrid forms, mutationswere used as local conformational probes. The effects of thesemutations on the capabilities of MalE–GVP to dimerizeand to bind single-stranded DNA were assayed in vitro. Theywere compatible with the effects of the same mutations on theglobal activity of free GVP in vivo and with the effects thatcould be predicted from the known data on free GVP, in particularits crystal structure. Thus, one partner of a hybrid proteincan be destabilized by the other partner while maintaining itsstructural and functional characteristics.     

混杂方式对CF/UHMWPEF混杂复合材料力学性能的影响

本文通过碳纤维/超高分子量聚乙烯纤维混杂复合材料的力学性能试验及结果比较,分析了三种混杂方式对该类复合材料的力学性能的影响.结果表明,不同混杂方式的碳纤维/超高分子量聚乙烯纤维复合材料具有各自的力学特点.     

Preparation and application of fluorocarbon polymer/SiO2 hybrid materials,part 1: Preparation and properties of hybrid materials

For this study, we first prepared a fluorocarbon polymer and its hybrid materials. We found that fluorocarbon copolymers can produce hydrogen bonds with SiO₂ to form hybrid materials. We also used thermogravimetric analyzer and tested the thermostabilities of the four products, which were ranked as follows: fluorocarbon copolymer/SiO₂ hybrid material > fluorocarbon polymer/SiO₂ hybrid material > fluorocarbon copolymer > fluorocarbon polymer. In addition, we found that, due to the inorganic SiO₂ used, the number of pores and the specific surface areas of the hybrid materials both increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1140–1145, 2007     

Toughening of vinylester–urethane hybrid resins through functionalized polymers

Liquid nitrile rubber, hyperbranched polyester, and core/shell rubber particles of various functionality, namely, vinyl, carboxyl, and epoxy, were added up to 20 wt % to a bisphenol‐A‐based vinylester–urethane hybrid (VEUH) resin to improve its toughness. The toughness was characterized by the fracture toughness (K_c) and energy (G_c) determined on compact tensile (CT) specimens at ambient temperature. Toughness improvement in VEUH was mostly achieved when the modifiers reacted with the secondary hydroxyl groups of the bismethacryloxy vinyl ester resin and with the isocyanate of the polyisocyanate compound, instead of participating in the free‐radical crosslinking via styrene copolymerization. Thus, incorporation of carboxyl‐terminated liquid nitrile rubber (CTBN) yielded the highest toughness upgrade with at least a 20 wt % modifier content. It was, however, accompanied by a reduction in both the stiffness and glass transition temperature (T_g) of the VEUH resin. Albeit functionalized (epoxy and vinyl, respectively) hyperbranched polymers were less efficient toughness modifiers than was CTBN, they showed no adverse effect on the stiffness and T_g. Use of core/shell modifiers did not result in toughness improvement. The above changes in the toughness response were traced to the morphology assessed by dynamic mechanical thermal analysis (DMTA) and fractographic inspection of the fracture surface of broken CT specimens. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 672–680, 2002; DOI 10.1002/app.10392     

多周期多原料的供应链网络成本优化及其混合遗传算法

建立并求解一个基于成本最小的供应链网络模型.与以往研究不同,在该模型中生产一种产品需要至少两种原料,每种原料都可以由备选供应商提供.根据模型的特点,用0、1代表对原材料供应商、工厂和分销中心的选择情况,以MATLAB 7.6为平台,运用Sheffield大学的遗传算法工具箱,将遗传算法与线性规划算法相结合,实现了模型的求解.算例结果表明,给出的染色体编码方案正确,混合遗传算法有效,能解决多周期、多原料的供应链网络成本优化问题.还探讨了需求和距离变化,以及需求随机时对最优成本和最优个体的影响.研究表明,需求变化的影响大于距离变化的影响,需求随机对最优成本和最优个体的影响不大.