智能混合控制器在转炉干法除尘中的应用

转炉干法除尘蒸发冷却器出口烟气温度大多数采用常规串级控制方式,但转炉冶炼前期控制效果并不理想.对转炉冶炼过程及蒸发冷却器出口烟气温度的控制难点进行研究,找出常规串级控制方式的缺点,并设计出一种智能混合控制器.采用智能模糊控制器和常规控制器并联的控制方式,对蒸发冷却器出口烟气温度进行控制,控制效果理想.实际应用表明,同常规串级控制器相比,智能混合控制器具有响应快、被控对象稳定等优点.     

Exploring single electrode reactions in polymer electrolyte fuel cells

Utilising a pseudo-reference electrode in polymer electrolyte fuel cells allows for the separation of anodic and cathodic contributions to the entire cell impedance. Modelling the impedance responses by using equivalent circuits inhibits the investigation of kinetic parameters of the basic electrochemical reactions, which take place at single electrode-electrolyte interfaces. Therefore, we evaluate single electrode impedance measurements by a kinetic model, which is based on specific reaction pathways, either for the oxygen reduction reaction (ORR) or the hydrogen oxidation reaction (HOR). As a consequence, it is possible to obtain kinetic parameters for the specific reaction of interest. Furthermore, the information gained from the single electrode impedance measurements and the kinetic model can give insight into single reactions steps. In particular, the ORR has to include a chemical step in the reaction pathway.     

基于双CPU的太阳能跟踪系统的研究

从提高太阳能电池板的输出功率出发,提出了基于双CPU控制方式的太阳能跟踪系统。系统采用俯仰-水平双轴控制,以单片机STC12C2052AD为光电控制单元的核心处理器,以混合式步进电机为执行机构,以TMS320F2812为核心控制器件的三相正弦波细分驱动器实现了混合式步进电机的精确定位。实验表明系统运行稳定,具有很高的实用价值。     

Investigation on the electrocatalytic characteristics of SnO_2 electrodes with nanocoating prepared by electrodeposition method

SnO2 electrodes have many advantages in the degradation of toxic or bio-refractory organic wastewater,and SnO2 is a kind of anode material which has the potential to be widely used.Electrocatalytic effi-ciency and service life of Ti\SnO2 electrodes are key factors that can influence its applications.In order to enhance the electrocatalytic characteristics of Ti\SnO2 electrodes,a type of electrocatalytic electrode with nanocoating was prepared by direct current(DC)electrodeposition method and thermal oxidati...     

Incremental join view maintenance on distributed log-structured storage

Modern database systems desperate for the ability to support highly scalable transactions and efficient queries simultaneously for real-time applications. One solution is to utilize query optimization techniques on the on-line transaction processing (OLTP) systems. The materialized view is considered as a panacea to decrease query latency. However, it also involves the significant cost of maintenance which trades away transaction performance. In this paper, we examine the design space and conclude several design features for the implementation of a view on a distributed log-structured merge-tree (LSMtree), which is a well-known structure for improving data write performance. As a result, we develop two incremental view maintenance (IVM) approaches on LSM-tree. One avoids join computation in view maintenance transactions. Another with two optimizations is proposed to decouple the view maintenance with the transaction process. Under the asynchronous update, we also provide consistency queries for views. Experiments on TPC-H benchmark show our methods achieve better performance than straightforward methods on different workloads.     

Effect of surface modification of metal hydride electrode on performance of MH/Ni batteries

A novel method was applied to the surface modification of the metal hydride(MH)electrode of MH/Ni batteries.Both sides of the electrode were plated with a thin silver film about 0.1μm thick using vacuum evaporation plating technology,and the effect of the electrode on the performance of MH/Ni batteries was examined.It is found that the surface modification can enhance the electrode conductivity and decrease the battery ohimic resistance.After surface modification,the discharge capacity at 5C(7.5A)is increased by 212 mA.h and the discharge voltage is increased by 0.11 V,the resistance of the batteries is also decreased by 32%.The batteries with modified electrode exhibit satisfactory durability.The remaining capacity of the modified batteries is 89%of the initial capacity even after 500 cycles.The inner pressure of the batteries during overcharging is lowered and the charging efficiency of the batteries is improved.     

ZL114铝合金激光--龟弧的复合焊接

设计了一种激光-电弧复合热源焊接ZL114合金的新工艺，并对焊后的试件进行了X光检测、抗拉强度和全相组织等实验。结果表明，该种新工艺对铝合全有良好的适应性和可行性，是焊接领域的一个趋势。     

Performance of positive and negative electrodes in amorphous manganese oxide supercapacitor

Using potassium permanganate and acetic manganese as the reactants, amorphous manganese oxide was prepared with mechanochemical method. XRD was used for microstructure characterization, while cyclic voltammetry and constant current charge-discharge were used for electrochemical performance testing. The positive electrode （PE） and negative electrode （NE） were investigated respectively in amorphous manganese oxide supercapacitor, aiming to find their different performances in charging-discharging. The results show that the crystalline structure is destroyed in both the PE and NE material during charge-discharge process. Thereinto, the NE suffers a bit more seriously. When cycling, the PE potential scope diminishes while the NE potential scope enlarges. The increased inner resistance makes the NE curves almost bended to be a right angle, but not the PE curves. The cell＇s equivalent series resistance （ESR） is more dependent on the NE, and the capacitance is mainly determined by the rapid descent of the NE potential range. The capacitances of the NE are highly rate-dependent, decreasing from 121.3 to 53.1 F/g, by 56.2%, over the range of 5-25 mV/s. However, the PE appears to be weakly dependent and its capacitance is only dropped by 22.1%.     

Nano-composite ZrO2/Au film electrode for voltammetric detection of parathion

This work describes the fabrication of ZrO₂/Au nano-composite films and its application for voltammetric detection of organophosphate pesticides. The nano-composite ZrO₂/Au film was prepared through a combination of sol–gel procedure and electroless plating that can be carried out in a general chemistry lab with no need for special facilities and reagents. The sensing performance of the ZrO₂/Au nano-composite film electrode toward parathion was studied with square wave voltammetry. The nano-ZrO₂ showed a strong affinity toward the phosphate group on parathion molecules, which provides sensitivity and selectivity of the sensing film. A linear relationship was obtained between the peak currents and the concentration of parathion, with a detection limit for standard samples of 3 ng/ml. In addition, interference studies showed that structurally similar compounds without phosphate groups would not interfere with the response toward parathion of the film electrode.     

An ant direction hybrid differential evolution heuristic for the large-scale passive harmonic filters planning problem

This article presents a heuristic which combines the orthogonal array experiment technique and an ant direction hybrid differential evolution algorithm (ADHDEOA) for planning of a large-scale passive harmonic filters problem. The addressed problem has a multi-bus and under abundant harmonic current sources in the system. In this study, an orthogonal array is first conducted to obtain the initial solution. Next, an ant direction hybrid differential evolution (ADHDE) is applied to search for a near optimum solution. The objective is to minimize the cost of the filter, the total demand distortion of harmonic currents and the total harmonic distortion of voltages at each bus simultaneously. In order to determine a set of weights of each term in the objective function, the simplest and most efficient form of triangular membership functions has been considered. The designed heuristic ADHDEOA is applied to a practical harmonic problem in a steel plant, and three design schemes are compared to demonstrate the performance of the ADHDEOA.