A new method for estimating initial rotor phase of self‐excited hybrid‐field synchronous motors

This paper proposes a new method for properly estimating the rotor initial phase (i.e., the position) of the newly emerging self‐excited hybrid‐field synchronous motors (SelE‐HFSMs), which have the rotor held by both a permanent magnet and a diode‐shorted held winding. The proposed method injects a spatially rotating high‐frequency voltage and detects the rotor phase directly by evaluating the norm of the associated current. The method is very simple, but has a high degree of usability. 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(3): 49–58, 2010; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.21027     

新型混合型限流断路器分析及试验

研究了一种基于高速斥力开关的交直流两用混合型限流断路器方案,该限流断路器在限流过程中先经过一个强迫换流过程,使得触头分离时高速斥力开关上电流减小到较小值,触头分离后再经历一个自然零电压换流过程,将斥力开关电流换流到二极管支路上.重点对限流断路器换流过程进行了理论分析及仿真,分析了其可能出现的4种分断情况.研制了400V/500A限流断路器样机,并进行了不同短路电流上升率的限流试验,验证了理论分析的正确性.     

O2,金属电极/YSZ界面的电化学研究

本文利用交流阻抗和直流极化的电化学方法，比较了200～500℃氧在Pt、Ag、Au、Ag－Pd四种化学镀电极上的扩散，350～600℃氧在金属电极／YSZ界面的电化学反应速度以及阴阳电荷传递系数；计算了350～600℃四种电极的界面阻抗；研究了400℃时O2在Ag－Pd电极界面的交换电流密度Io与氧分压Po2的定量关系．     

混合七电平逆变器的变频PWM控制器

采用一种直接PWM算法，研制了一台基于数字信号处理器(DSP)和现场可编程逻辑阵列(FPGA)的混合七电平变频PWM控制器，并在380V／8kW的样机系统上进行了实验。介绍了该控制器的设计原理与实现：给出了实验结果及分析。实验结果表明，该控制器的设计方案实现简单、调试方便，具有良好的输出特性。     

碱性锌空气电池的新发展

碱性锌空气电池具有较高的质量比能量和质量比功率,工作电压平稳,成本低廉,受到世界的广泛关注。介绍了碱性锌空气电池的工作原理和优点及其应用领域;论述了碱性锌空气电池发展所要解决的问题;分析了目前国内外的发展现状;并展望了其发展前景。     

纳秒脉冲激光器制备的Si表面宽带抗反射杂化结构

提出了一种通过纳秒脉冲激光器微加工制作的杂化准微金字塔型结构,与未经处理的均匀准微金字塔型结构相比,平均反射率下降了15%。通过实验,系统研究了激光能量密度、脉冲个数和图案间距对反射性能的影响。结果表明,反射率随图案间距的增加而增加,随着脉冲数增加而减少,当激光能量密度在4.83J/cm2时获得最小反射。这种技术用具有普通纵横比的微杂化结构替代高纵横比的非杂化结构,获得宽带抗反射性能,成本更低。通过优化激光加工参数能获得较高的抗反射性能。     

Room‐Temperature Partial Conversion of α‐FAPbI3 Perovskite Phase via PbI2 Solvation Enables High‐Performance Solar Cells

The two‐step conversion process consisting of metal halide deposition followed by conversion to hybrid perovskite has been successfully applied toward producing high‐quality solar cells of the archetypal MAPbI₃ hybrid perovskite, but the conversion of other halide perovskites, such as the lower bandgap FAPbI₃, is more challenging and tends to be hampered by the formation of hexagonal nonperovskite polymorph of FAPbI₃, requiring Cs addition and/or extensive thermal annealing. Here, an efficient room‐temperature conversion route of PbI₂ into the α‐FAPbI₃ perovskite phase without the use of cesium is demonstrated. Using in situ grazing incidence wide‐angle X‐ray scattering (GIWAXS) and quartz crystal microbalance with dissipation (QCM‐D), the conversion behaviors of the PbI₂ precursor from its different states are compared. α‐FAPbI₃ forms spontaneously and efficiently at room temperature from P₂ (ordered solvated polymorphs with DMF) without hexagonal phase formation and leads to complete conversion after thermal annealing. The average power conversion efficiency (PCE) of the fabricated solar cells is greatly improved from 16.0(±0.32)% (conversion from annealed PbI₂) to 17.23(±0.28)% (from solvated PbI₂) with a champion device PCE > 18% due to reduction of carrier recombination rate. This work provides new design rules toward the room‐temperature phase transformation and processing of hybrid perovskite films based on FA⁺ cation without the need for Cs⁺ or mixed halide formulation.     

Triboelectric and Piezoelectric Effects in a Combined Tribo‐Piezoelectric Nanogenerator Based on an Interfacial ZnO Nanostructure

In this contribution, combined triboelectric and piezoelectric generators (TPEG) with a sandwich structure of aluminum‐polydimethylsiloxane/polyvinylidene fluoride composite‐carbon (Al‐PPCF‐Carbon) are fabricated for the purpose of mechanical energy harvesting. Improved by the surface modification of PPCF with zinc oxide (ZnO) nanorods through a hydrothermal method, the TPEG generates an open‐circuit voltage (V_oc) of ≈40 V, a short‐circuit current (I_sc) of 0.28 μA with maximum power density of ≈70 mWm^?2_, and maximum conversion efficiency of 34.56%. Subsequently, in order to understand the transduction mechanism of the triboelectric and piezoelectric effects, analyses focusing on the potential composition ratio in the final output and the impact of ZnO interfacial nanostructure are carried out. The observed potential ratio between triboelectric and piezoelectric effects is 12.75:1 and the highest potential improvement by ZnO nanorods of 21.8 V is achieved by the TPEG fabricated with spacer. Finally, the relationships between the voltage, power density, conversion efficiency, and the external load resistances are also discussed. Overall, the fabricated TPEG is proved to be a simple and effective nanogenerator in mechanical energy conversion with enhanced output potential and conversion efficiency.     

CDNPatch: a cost‐effective failover mechanism for hybrid CDN‐P2P live streaming systems

Among the most well‐established live media distribution technologies is content delivery network (CDN), which improves user‐perceived quality of service by delivering content from proxy servers deployed at the Internet's edge. In recent years, CDN providers started to tap into their subscribers' peer‐to‐peer (P2P) capacity to alleviate their server costs. Under the inherent peer dynamics, a major challenge of these hybrid CDN‐P2P systems is to provide efficient failure recovery with good quality of service guarantees at a reduced server cost. In this work we propose a cost‐effective failover solution named CDNPatch to address the aforementioned problem. CDNPatch enables peers to periodically precompute a few backup content suppliers by efficient information exchange and maintenance algorithms, and leverages auxiliary CDN servers and an economic server provisioning algorithm to reduce the chance of playback interruption occurring to peers. Our simulation results show that CDNPatch can mask the impact of peer dynamics of 3 real P2P systems, namely, SOPCast, PPStream, and PPTV, with 100 % failure recovery success rate and a failure recovery time less than 1 second at a cost of small P2P communication overhead of less than 1 kilobits per second, while using only 10%, 21%, and 51%, respectively, of the pure CDN scheme's server consumption.     

新工科环境下“EDA技术”课程改革的探索

高校新工科人才培养的要求是培养一大批多样化、创新型卓越工程科技人才。针对培养要求切实做出积极的改革,首先重构EDA技术课程的教学时间,由线上和线下两部分组成。线上课要求完成课程视频学习、单元测验、讨论和期末测试;线下课堂要求完成见面课项目设计、实验课和期末考试。通过线上线下课堂教学的结合,加强过程性考核手段,完善学生学习评价机制。