秦山核电厂蒸汽发生器水位控制试验

简要介绍了蒸汽发生器水位控制系统的运行方式和试验方法。试验项目包括旁通阀控制试验、主给水阀控制试验和旁通阀与主给水阀的切换试验。文中给出了试验结果,即在液位扰动和核动率扰动时,蒸汽发生器液位的变化过程。经过两个月的运行和瞬态试验,证明蒸汽发生器水位控制系统满足设计要求。     

数字式液压逻辑流量阀的设计

数字工流量阀采用数字控制方式，调节系统流量以达到液压系统调整目的，它本身具有控制响应快、精度高、稳定性好、适应范围大等优点，在行走机械上将会得到广泛地应用。     

诸暨市老城区合流制排水系统的改造

对诸暨市城中区三个不同区域合流制排水系统的地形条件、污染源性质、污水量、道路现状、施工条件及工程资金情况等进行综合分析后，分别采取了不同的改造措施，其实施效果良好。     

简述空调环境微生物传播及防治

简要论述了一般空调环境下的主要微生物种类及其主要传播方式，分析了影响其传播的因素，同时介绍了现在常用的防治方法，提出了一些改进的意见。     

大伙房水库渗流监测自动化系统建设经验

介绍了大伙房输水工程重要的配套工程——大伙房水库渗流监测自动化系统的设计方法与实施过程，阐明了测位选布与工程衔接、方便系统维护与运行等问题，实现了与原观测系统的设计选点、施工建设、应用开发及数据处理过程等的配合，在保证系统原观测成果连续、设备运行稳定、与其他系统协调友好、施工过程不冲突和不重复的基础上，很好地实现了由传统监测向自动化监测的过渡。     

电传动装甲车辆冷却系统水路性能试验研究

根据电传动装甲车辆冷却系统高低温双泵双循环设计要求,通过台架联机试验全面测试了冷却系统双循环水路及各循环支路温度变化和水流量分配特性、发电机绕阻温度变化规律及低温循环水路工作性能,测试结果表明:发电机冷却水路与发动机循环水路串联可行,双循环水路及各循环支路水流量和进出口温度变化满足动力系统不同工作状态散热要求,所选部件匹配合理,达到设计要求.     

Action strategies for strengthening industrial clusters in southern Taiwan

For the past decade, the Taiwanese government has applied the policy of “North heavy, South light” to put more emphasis on development in northern Taiwan instead of the south. This has resulted in uneven development between the northern and southern regions, especially when introducing, developing, and supporting high technology and resource allocation in education. Industry clusters have become the centerpiece of economic development policy in many parts of the world. In this study, it is assumed that there are two categories of less-advantaged regions in Taiwan: (1) older industrialized regions dominated by labor-intensive/capital-intensive industries, and (2) industrial regions that have merged with potential high-technology small firms but still lack infrastructure. This study discusses the following points: (a) How do industrial clusters work in action? (b) What barriers do less-advantaged industrial clusters face? (c) What action strategies promote less-advantaged industrial clusters?     

南洲水厂自动化综合监控系统

介绍了南洲水厂自动化控制系统的结构及组成，以及设计考虑的主要问题。针对系统规模大、监控点数多、控制复杂等特点，在传统DCS系统三层结构上进行扩展，采用最新的企业级分布式监控解决方案，应用多种通讯技术，揉合多种工业总线，解决了固定和移动设备、远程站点的卖时监控问题，实现了不同设备、不同子系统之间的数据交换，是真正意义上的一体化控制。     

高职《机械制造技术》课程体系改革探讨

本文回顾了高职《机械制造技术》课程体系的演变过程,分析了现有教材的优点和缺陷,提出本课程体系改革的基本指导思想,构建了理论与实践教学体系的具体框架.     

Dynamic properties of carbon black filled chlorinated polyethylene/hindered phenol blends

Aggregates of carbon black (CB) in a polymer matrix have a tendency to form a CB network. The dynamic mechanical properties of binary systems of chlorinated polyethylene (CPE) and CB or 3,9‐bis{1,1‐dimethyl‐2[β‐(3‐tert‐butyl‐4‐hydroxy‐5‐methylphenyl)propionyloxy]ethyl}‐2,4,8,10‐tetraoxaspiro[5,5]‐undecane (AO‐80) and their ternary systems were investigated. It was found that the dynamic mechanical properties of those systems depend on the colloidal properties, surface oxides, and surface modification of CB. For binary systems of CPE and CB, oxidized CB gives a high modulus at low strain amplitude and a large Payne effect compared with untreated CB. In contrast, the reverse effect was observed for their ternary systems. Consequently, a good micro‐dispersion is obtainable by surface modification due to physical adsorption of AO‐80 on oxidized CB particles via hydrogen bonds. © 2003 Society of Chemical Industry