Sorption of ethene and ethane on the V2O5(001)/TiO2(001) anatase interface

Simulation techniques have been employed to investigate the differences in the low energy adsorption configurations of ethene and ethane on the TiO₂ supported and unsupported V₂O₅(001) surface. We find that the ethene molecule approaches much closer to thesupported V₂O₅(001) surface which is reflected in the 40 kj mol^–1 higher adsorption energy. The low energy adsorption configuration located for ethane on the supported V₂O₅ shows that the molecule does not approach as close to the supported V₂O₅ surface as does ethene, resulting in the adsorption energy of ethane being 52 kJ mol^–1 lower than that of ethene on the supported V₂O₅ surface.     

典型煤碳燃烧特性研究和数值模拟

本文以三种典型煤的碳燃烧为研究对象，分别采用简单一维沉降燃烧方式和等温加热燃烧方式，实验研究了煤在快速加热条件下，其碳的初期和中，后期燃烧过程。以实验为基础，建立了煤的碳燃烧模型，变工况数值模拟了煤的碳燃烧过程，揭示了煤不同条件下的单颗粒碳燃烧特性。     

瓷质砖湿坯对流干燥过程的传热传质研究

引用建立于Whitaker的体积平均方程和Darcy定律基础止的多孔介质内部热质传递的等效耦合扩散模型，寻出一组关于液体饱和度、温度和气相压力的新支配方程，应用该方程组对瓷质砖坯体干燥过程进行了数值分析和实验测定。在平均含湿饱和度的变化方面，数值解与实验结果十分吻合。还改变影响坯体干燥过程的一些因素进行计算机模拟计算，通过改变这些因素的大小来考察计算结果，以期获得某些定性或定量的结论，从而用以指导实际生产过程。     

混合蛙跳算法应用研究

混合蛙跳算法（SFLA）是一种模拟青蛙觅食行为的智能优化算法.算法具有设置参数少、简单易于理解、鲁棒性强等特点.由于该算法提出的时间不长,目前对此算法的研究成果并不多,该算法在理论和实践上还不够成熟,如该算法的鲁棒性、收敛性、稳定性等数学理论还未给出完整的数学证明,算法的适用范围目前还仅限于函数优化、组合优化、单目标优化、多目标优化等方面.本文重点分析研究了该算法的基本原理、应用前景、国内外的研究现状和主要研究内容,以及目前该算法研究过程中出现的问题.     

多Agent的供应链分布式仿真系统设计与实现

供应链是由供应商、制造商、仓库、配送中心和渠道商等构成的物流网络。并且供应链已经为社会带来了巨大的经济效益,本文就多Agent的供应链分布式仿真系统设计做了详细的研究,以便其能够很快的得到实现。     

Aromatization of n-butane over new LD-HBS catalysts. Effect of the gallium oxide support

It is shown that even pure quartz, other silicas or aluminas can enhance the aromatization activity of a ZSM-5 zeolite. Incorporation of gallium oxide onto these supports increases further the production of aromatics. The use of supported gallium oxide co-catalyst obtained by co-evaporation of a colloidal silica and a Ga salt has led to extremely high aromatization performance for the hybrid catalyst.     

Numerical Simulation of Oil‐water Hydrocyclone Using Reynolds‐Stress Model for Eulerian Multiphase Flows

A three‐dimensional oil‐water turbulent flow and oil separation process in a double‐cone liquid‐liquid hydrocyclone (LLHC) is numerically simulated using FLUENT software. The Euler‐Euler approach and Reynolds‐stress model are combined and adopted in this simulation to handle the challenging situation of anisotropic turbulent two‐phase flow with a higher volumetric ratio (over 10%) in the dispersed phase. It is visualized well in the simulation how separation, aggregation and shift of oil and water proceed in the LLHC. The oil separation efficiency is determined based on flow field and phase concentration distribution. The simulation is verified by comparing predicted and measured separation efficiency in the LLHC.     

An embedding approach for the design of state‐feedback tracking controllers for references with jumps

We study the problem of designing state‐feedback controllers to track time‐varying state trajectories that may exhibit jumps. Both plants and controllers considered are modeled as hybrid dynamical systems, which are systems with both continuous and discrete dynamics, given in terms of a flow set, a flow map, a jump set, and a jump map. Using recently developed tools for the study of stability in hybrid systems, we recast the tracking problem as the task of asymptotically stabilizing a set, the tracking set, and derive conditions for the design of state‐feedback tracking controllers with the property that the jump times of the plant coincide with those of the given reference trajectories. The resulting tracking controllers guarantee that solutions of the plant starting close to the reference trajectory stay close to it and that the difference between each solution of the controlled plant and the reference trajectory converges to zero asymptotically. Constructive conditions for tracking control design in terms of LMIs are proposed for a class of hybrid systems with linear maps and input‐triggered jumps. The results are illustrated by various examples. Copyright © 2013 John Wiley & Sons, Ltd.     

Matlab在《通信原理》课程中的应用研究

在《通信原理》课程教学中,运用Matlab构建了一个通信系统仿真平台辅助课堂教学,能够将抽象乏味的原理以图形的形式直观的显示出来,并能方便的改变参数来观察波形的变化,这使学生能够更好的掌握原理,并能调动学生的学习积极性,能获得较好的教学效果。该文以常规双边带调幅（AM）为例,运用Matlab软件仿真辅助教学,实际教学效果良好。     

Urea-SCR喷雾模拟计算中CFD的模型选择

数值模拟计算的模型选择对计算结果的准确性十分重要,不同的模型产生的不同结果差异很大,该文论述了采用计算流体力学技术模拟urea-SCR喷雾过程的优越性,利用spalart-allmaras模型、标准k-ε模型和标准k-ω模型对喷嘴雾化进行了数值模拟,分析了各模型的收敛性,速度矢量,动压力分布等物理量。结果表明：spalart-allmaras模型存在失真的情况,标准k-ε模型和标准k-ω模型在尿素SCR喷嘴模拟方面的应用是可行的。