扫描仪面框注塑件翘曲变形的模拟分析

以扫描仪面框薄壁件注塑成型为例，应用Moldflow软件分析了模具温度、熔体温度、浇口位置和保压参数对翘曲变形的影响规律，提出了减小翘曲变形的工艺措施，分析结果与生产实际吻合。     

Numerical Study of Solid-Liquid Two-Phase Flow in Stirred Tanks with Rushton Impeller (Ⅰ) Formulation and Simulation of Flow Field

Three-dimensional solid-liquid flow is mathematically formulated by means of the "two-fluid" approach and the two-phase k-ε-Ap turbulence model. The turbulent fluctuation correlations appearing in the Reynolds time averaged governing equations are fully incorporated. The solid-liquid flow field and solid concentration distribution in baffled stirred tanks with a standard Rushton impeller are numerically simulated using an improved "inner-outer" iterative procedure. The flow pattern is identified via the velocity vector plots and a recirculation loop with higher solid concentration is observed in the central vicinity beneath the impeller. Comparison of     

Synthesis and characterization of organic-inorganic hybrid thin films from poly(acrylic) and monodispersed colloidal silica

Hybrid thin films containing nano-sized inorganic domain were synthesized from poly(acrylic) and monodispersed colloidal silica with coupling agent. The 3-(trimethoxysilyl)propyl methacrylate (MSMA) was bonded with colloidal silica first, and then polymerized with acrylic monomer to form a precursor solution. Then, the precursor was spin coated and cured to form the hybrid films. The silica content in the hybrid thin films was varied from 0 to 50 wt%. The experimental results showed that the coverage area of silica particle by the MSMA decreased with increasing silica content and resulted in the aggregation of silica particle in the hybrid films. Thus, the silica domain in the hybrid films was varied from 20 to 35 nm by the different mole ratios of MSMA to silica. The results of scanning electron microscope, transmission electron microscope, and elemental analysis support the above results. The prepared hybrid films from the crosslinked acrylic polymer moiety showed much better film uniformity, thermal stability and mechanical properties than the poly(methyl methacrylate) (PMMA) based hybrid materials. Large pin-holes were found in the PMMA-silica hybrid films probably due to the significant difference on thermal properties between the two moieties or the evaporation of solvent. The refractive index decreased linearly with increasing the silica fraction in the hybrid films. Excellent optical transparence was obtained in the prepared hybrid films. These results show that the hybrid thin films have potential applications as passive films for optical devices.     

激光推进用于飞行器姿轨控制的分析与仿真

激光推进成本低、可靠性高,可用作飞行器的空间推进和姿态调整。建立了考虑反馈控制和激光推进的飞行器动力学模型,模型中的操纵控制项模拟了飞行器操纵系统和激光推进产生的力、力矩。详细研究了确定操纵项的方法,使用自适应飞行控制律,给出一种通过求解线性方程组确定操纵控制项的方法。以圆形盘旋轨迹为例,进行了数值模拟,计算结果显示,激光推进下的飞行器能很好按照目标轨迹飞行,并对计算结果进行了分析。     

复杂电磁暂态下变压器差动保护异常动作行为分析及对策

随着电力系统结构与组成的复杂性增加,变压器差动保护发生原因不明的误、拒动作几率明显上升,给电网安全带来隐患,也影响工业生产的正常运行.分析变压器经历外部故障切除、有载合闸、非线性负荷投入、换流变合闸等复杂电磁暂态过程时基于二次谐波制动的差动保护误动的机理,指出TA局部暂态饱和、非线性特性元件的相互作用是造成上述保护误动的根本原因.并对换流变压器差动保护在故障情况下长延时动作的原因进行分析,基于相电压突变量和差流突变量的时差,提出一种能有效解决上述问题的变压器差动保护判据。在任何非故障的异常情况下,该时差总是存在,而内部故障时该时差很小,可以将变压器故障和其经历的异常运行状态相区分.通过大量的试验对该判据的可行性和有效性进行验证.     

应用瞬变电磁技术对屯留煤矿南一采区赋水性分析

通过对钻孔以及强干扰区进行参数试验,确定了发射边框、发射频率、发射电流、采样延迟、高压线影响等施工布置参数;结合野外实测数据和钻孔测井资料,进行数据处理和反演,得出采区内的煤系地层与上下围岩有着明显的电性差异;采区北部富水性相对较强,中部和南部富水性相对较弱,F66断层和X26、X35、X79陷落柱是各煤层和奥灰岩的垂向导水通道。     

大气湍流中光传播的数值模拟

大气分子等粒子的存在对光的空间传播通常会产生光束的扩展、漂移等的影响.文中在随机媒质中光的传播理论的基础上,分析了构造大气湍流随机相位屏所需要的条件,采用McGlamery算法和Huygens-Fresnel原理,数值模拟给出了Kolmogorov谱下的大气湍流随机相位屏.分析了光波从发射机经湍流大气传播到达接收机平面时的光场变化特征.模拟分析表明:大气分子等粒子的存在,对光的振幅及能量的空间分布均造成很大的影响.     

Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

再生剂与老化沥青微观作用机理

采用分子动力学模拟方法,根据老化沥青体系溶解度参数变化规律,研究了再生剂组分对老化沥青相容性的影响;通过体系的相互作用能分析,探讨了再生剂组分对老化沥青再生的作用机理。结果表明,芳香分有助于改善老化沥青的相容性,且芳香分掺量越大改善效果越好;饱和分则刚好相反,这与实验结论相一致。芳香分与老化沥青相互作用能随掺量增大而急剧增大,意味着两者相互吸引作用显著增强,其原因在于静电相互作用能占据主导地位,范德华相互作用能相对较小;然而饱和分与老化沥青的相互作用能随掺量变化不大,其中静电相互作用能和范德华相互作用能几乎各占一半贡献。分子间的静电相互作用能是影响老化沥青再生的主要因素。     

Ad hoc网络路由协议在不同场景下的仿真研究

移动自组织网在不同场景下的运动特性会有所不同,在不同的场景下移动自组织网络的路由协议的性能也有所不同。通过对现在流行的网络仿真软件NS2的扩展,在仿真软件中模拟出街道或校园的环境和高速公路的场景。针对这不同的两种环境下,运用NS2网络仿真软件的网络路由协议进行仿真模拟,从各种性能指标方面进行分析。研究表明在不同的场景下,按需路由协议AODV表现出了更好的稳定性。