堆底熔穿事故的场外后果及其对策

在压水堆核电站应急计划和应急响应中，堆底熔穿事故占有重要位置。本文用法国核电厂事故源项Ｓ３（对应于堆底熔穿事故）计算了在典型气象条件下的场外放射学的后果，根据一般防护决策原则和我国颁布的干预水平，提出了保护公众的应急防护措施的建议。     

PTN网络的二次断纤链路规划算法

在PTN（PacketTransportNetwork）网络规划建设中,需要对光纤链路留出备份带宽,以保证部分光纤断开时,受影响业务有足够的容量进行路由重组。这也是提高网络生存性的有效方法之一。文中首先遍历网络双链路的失效状态,然后断开网络中任意两条链路,通过逐次增加链路容量来保证失效业务能够重组路由;最后提出二次断纤链路容量规划算法并进行试验仿真。结果表明,该算法在节约网络带宽、降低建造成本以及故障容错方面有着良好性能,能够很好应用于传送网络的链路规划中。     

考虑多样化需求的诊疗设备维护和患者调度联合优化研究

针对诊疗设备维护和住院患者候诊难以有效协调的问题,建立了联合优化模型。首先,假设设备具有离散的劣化状态,将设备的劣化过程建模为连续时间马尔可夫链;其次,考虑到患者对诊疗设备的不同功能频率需求,以及不同劣化状态对患者治疗时间、费用的影响,以患者就诊顺序、检查策略、修复策略为决策变量建立了设备维护和患者调度模型;最后,采用改进后的非支配排序遗传算法对多目标问题进行了求解。实验结果验证了设备维护与患者调度联合优化模型的有效性。改进后的算法提高了整体和局部的搜索能力,且具有鲁棒性。     

Mathematical model and discrete artificial Bee Colony algorithm for distributed integrated process planning and scheduling

With the development of the globalization of economy and manufacturing industry, distributed manufacturing mode has become a hot topic in current production research. In the context of distributed manufacturing, one job has different process routes in different workshops because of heterogeneous manufacturing resources and manufacturing environments in each factory. Considering the heterogeneous process planning problems and shop scheduling problems simultaneously can take advantage of the characteristics of distributed factories to finish the processing task well. Thus, a novel network-based mixed-integer linear programming (MILP) model is established for distributed integrated process planning and scheduling problem (DIPPS). The paper designs a new encoding method based on the process network and its OR-nodes, and then proposes a discrete artificial bee colony algorithm (DABC) to solve the DIPPS problem. The proposed DABC can guarantee the feasibility of individuals via specially-designed mapping and switching operations, so that the process precedence constraints contained by the network graph can be satisfied in the entire procedure of the DABC algorithm. Finally, the proposed MILP model is verified and the proposed DABC is tested through some open benchmarks. By comparing with other powerful reported algorithms and obtaining new better solutions, the experiment results prove the effectiveness of the proposed model and DABC algorithm successfully.     

Real-time integrated production-scheduling and maintenance-planning in a flexible job shop with machine deterioration and condition-based maintenance

The introduction of modern technologies in manufacturing is contributing to the emergence of smart (and data-driven) manufacturing systems, known as Industry 4.0. The benefits of adopting such technologies can be fully utilized by presenting optimization models in every step of the decision-making process. This includes the optimization of maintenance plans and production schedules, which are two essential aspects of any manufacturing process. In this paper, we consider the real-time joint optimization of maintenance planning and production scheduling in smart manufacturing systems. We have considered a flexible job shop production layout and addressed several issues that usually take place in practice. The addressed issues are: new job arrivals, unexpected due date changes, machine degradation, random breakdowns, minimal repairs, and condition-based maintenance (CBM). We have proposed a real-time optimization-based system that utilizes a modified hybrid genetic algorithm, an integrated proactive-reactive optimization model, and hybrid rescheduling policies. A set of modified benchmark problems is used to test the proposed system by comparing its performance to several other optimization algorithms and methods used in practice. The results show the superiority of the proposed system for solving the problem under study. The results also emphasize the importance of the quality of the generated baseline plans (i.e., initial integrated plans), the use of hybrid rescheduling policies, and the importance of rescheduling times (i.e., reaction times) for cost savings.     

Decision-based process planning for wire and arc additively manufactured and machined parts

The conventional manufacturing of aircraft components is based on the machining from bulk material and the buy-to-fly ratio is high. This, in combination with the often low machinability of the materials in use, leads to high manufacturing costs. To reduce the production costs for these components, a process chain was developed, which consists of an additive manufacturing process and a machining process. To fully utilize the process chain’s capabilities, an integrated process planning approach is necessary. As a result, the work sequence can be optimized to achieve the economically most suitable sequence. In this paper, a method for a joint manufacturing cost calculation and subsequent decision-based cost minimization is proposed for the wire and arc additive manufacturing (WAAM) & milling process chain. Furthermore, the parameters’ influence on the results and the magnitude of their influence are determined. These results make it possible to design an economically optimal work sequence and to automate the process planning for this process chain.     

Heuristic collision-free path planning for an autonomous platform

In this paper, a heuristic and learning, algorithmic scheme for collision-free navigation is presented. This scheme determines an optimum collision-free navigation path of an autonomous platform by using a trial and error process, past navigation knowledge and current information extracted from the generated surrounding environment.     

避暑山庄的选址

造园首在选址。选址得当,可以事半功倍。计成在《园冶》中指出,只有“相地合宜”,才能“构园得体”。地址要好,清洁卫生,有丘有壑,草地和树林相间”。避暑山庄之所以能够在造园史上独树一帜,选址得当是其中一个重要原因。避暑山庄当时所以选择这块地方建造宫苑,除政治上的原因之外,主要是因为它具有优越的自然条件。避暑山庄的园林艺术成就,已得到世人的公认,造园家相地择址的匠心,也会给我们许多有益的启示。     

Commercial objectives,technology transfer,and systems analysis for fusion power development

Fusion is an essentially inexhaustible source of energy that has the potential for economically attractive commercial applications with excellent safety and environmental characteristics. The primary focus for the fusion-energy development program is the generation of centralstation electricity. Fusion has the potential, however, for many other applications. The fact that a large fraction of the energy released in a DT fusion reaction is carried by high-energy neutrons suggests potentially unique applications. These include breeding of fissile fuels, production of hydrogen and other chemical products, transmutation or burning of various nuclear or chemical wastes, radiation processing of materials, production of radioisotopes, food preservation, medical diagnosis and medical treatment, and space power and space propulsion. In addition, fusion R&D will lead to new products and new markets.Each fusion application must meet certain standards of economic and safety and environmental attractiveness. For this reason, economics on the one hand, and safety and environment and licensing on the other hand, are the two primary criteria for setting long-range commercial fusion objectives. A major function of systems analysis is to evaluate the potential of fusion against these objectives and to help guide the fusion R&D program toward practical applications. The transfer of fusion technology and skills from the national laboratories and universities to industry is the key to achieving the long-range objective of commercial fusion applications.     

机器人三维路径规划问题的一种改进蚁群算法

本文研究移动机器人三维空间路径规划问题,针对三维空间的复杂地形特点,提出了一种基于改进蚁群算法的路径规划算法。文中首先描述了一种简单有效的环境建模方法,然后给出了算法在信息素呈现、路径点选取、信息素更新以及启发式函数设计等方面的改进方法。仿真结果证明了算法的可行性和可靠性。