活塞式压缩机吸排气管道的振动与控制

阐述了活塞式压缩机吸、排气管道强烈振动的危害，分析了产生共振的原因，介绍了现场消减管道振动的有效措施。     

全球气候变暖对水资源的影响

全球气候变暖加剧了干旱、洪涝、台风等自然灾害的发生，是目前各国政府和社会公众普遍关注的热点问题。根据有关资料对气候变暖研究进展情况作相关介绍，可供参考。     

残留奥氏体对1500MPa级新型低碳Mn-Si-Cr系合金钢冲击韧度的影响

15 0 0MPa级无碳化物贝氏体 马氏体复相钢的第一类回火脆性开始温度高于 36 0℃。实验表明 ,这并非由于贝氏体 马氏体复相韧化 ,而是与无碳化物贝氏体中的膜状残留奥氏体有关。无碳化物贝氏体中机械稳定性较高的残留奥氏体可能是导致无碳化物贝氏体 马氏体复相钢第一类回火脆性开始温度升高的直接原因。     

云南省水环境状况及问题分析

根据2000年云南省主要河流水质监测评价结果，全省评价河段总长9280km中，水质为Ⅰ－Ⅲ类的河长占76．3％，总体上，云南省内各大水系水质良好，但水污染总体上正在加重，从1985－2000年，Ⅰ类河长年均减少2．3％，V类河长年均增长0．6％，废污水直接排入江河是引起污染的重要原因。水环境问题已成为社会经济可持续发展的关键问题，要切实加强水资源的保护，科学地开发利用水土资源，为了有效地改善水环境的质量，污染控制应从源头开始并采取综合治理措施。     

宜昌站泄流能力变化对葛洲坝设计洪水影响

宜昌水文站是葛洲坝、三峡水利枢纽的设计依据站。葛洲坝水利枢纽动工修建和运行 ,对该站水位流量关系中低水部分产生了影响。探讨了该河段泄流能力的变化对葛洲坝水利枢纽设计洪水有无影响的问题。用1 967～ 1 999年实测资料对宜昌站以汛期平均水位为参数的水位流量关系曲线簇进行了检验 ,大部分年份最大日平均流量、3、7、1 5、30d洪量的偏差在± 4 %之间 ,说明曲线簇推流具有相当的精度。证明了宜昌河段中低水泄流能力的变化对葛洲坝水利枢纽设计流量和校核流量基本没有影响     

热流体喷射变形机理与喷嘴结构

高速短程纺技术能生产三维卷曲短纤维,该技术的关键之一是热流体喷射装置。本文介绍了热流体喷射装置的演变与特点及它的加工机理和某些已应用的实际装置。     

Improvement of Air-Distributing System of the Pneumatic Impact Machines for Trenchless Technologies

The process of actuation is considered for the inertial element in the improved air-distributing system of pneumatic puncher whose dimensionless parameters are determined.     

加入WTO对我国水利科技工作的影响及对策

加入WTO后，对我国水利科技发展的影响主要表现在：研究开发活动、技术标准和知识产权保护方面，为适应WTO的各项规则，履行我国政府所作出的承诺，必须调整水利科技政策和发展战略，促进我国水利科技事业的健康发展。     

A Method of Combined SHPB Technique and BP Neural Network to Study Impact Response of Materials

Abstract:  A new method combining the split Hopkinson pressure bar (SHPB) technique with the back-propagation (BP) neural network program is proposed. By this method, the treated strain wave signals become smooth with less noises induced by the transverse inertia. Moreover, the dynamic rate-dependent constitutive behaviour of materials can be identified, without any pre-assumption of a constitutive model. It is found that by taking the experimentally measured data of strain, strain rate and time as 'input' and the corresponding data of stress as 'output' of the BP neural network, the dynamic constitutive behaviour with internal damage or phase transformation evolution is easy to be identified, where the time could represent either the internal damage evolution or phase transformation process accompanied with the deformation process. It is emphasised that the data learnt by the BP neural network must include both loading and unloading processes, if the whole loading and unloading response is to be correctly predicted. The comparisons between the predictions and experimental results are in good agreement for both polyamide (PA) polymer (as an example of nonlinear viscoelastic materials) and Ti–Ni alloy (as an example of superelastic materials with stress-induced phase transformation).     

Design improvements on rotary valve particle feeders used for obtaining suspended airflows

The back repulsion of low density particles, sticking of particles in feeder valve and interlocking and cohesive archs of particles in feeder hopper have been widely observed problems of a conventional rotary valve feeder used for feeding of granular particles into an airflow line. In this study, these problems of the rotary valve feeders were isolated by means of novel modifications to its conventional design. Results of the modifications showed that the modified feeder can be sensitively used to feed granular particles with mass feeding rates ranging between 5±0.15 and 85±0.85 g/s without encountering problems experienced with conventional rotary valves.