适用于微机的核蒸汽发生器热工水力分析程序—SGTH—2

本程序用于计算核蒸汽发生器的热工水力分布参数以及一次侧流动压降、二次侧自然循环和稳态特性,将本程序的计算结果与法国对同型号蒸汽发生器的实测数据以及用 ATHOS 程序的相应计算结果进行比较,表明主要热工水力参数能令人满意地吻合。     

液晶显示驱动电路中Fibonacci型电荷泵单元

本文中所设计的电荷泵将用于手机液晶显示驱动模块中.通过对Fibonacci型电荷泵上升时间的估算,对减小上升时间和动态功耗进行折中考虑,本文提出优化开关频率的方法.用1.2μm CMOS双阱工艺参数对所设计的电荷泵进行模拟,结果表明这个电荷泵具有较快的上升速度和较高的效率.通过提高V_GS电平和保证开关管的衬底始终接在最高电位上,文中提出了一种新型Fibonacci电荷泵,它可以正常工作在从1.2V到5V变化的多种电源电压下.     

Breakdown characteristics of oil and paper insulation for a very fast transient voltage

This paper describes the dielectric breakdown characteristics of oil and oil‐impregnated paper for very fast transient (VFT) voltages. Blumlein circuits generate VFT voltages of 60 and 300 ns in a pulse width that simulates disconnecting switching surges in gas‐insulated switch gears. We measured the breakdown voltages of needle‐to‐plane, plane‐to‐plane oil gaps and several pieces of paper between plane electrodes for VFT and lightning impulse voltages. The measured data were formulated in V‐t characteristics and Weibull probability distributions. The inclination n of V‐t characteristics of insulating paper is 150, which is less than n = 13.7 of the plane‐to‐plane oil gap in the VFT time range. The shape parameters of Weibull distribution obtained in this study show that the scattering of breakdown voltages of paper is much less than that of oil. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(4): 16–24, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10043     

Voltage sag compensation with minimum energy injection by use of a micro‐SMES

This paper presents a method to compensate voltage sags with minimum energy injection for a series‐connected voltage restorer using a micro‐SMES. A circuit for extracting the fundamental symmetrical components from sag voltages and a minimum energy injection algorithm is described. Simulations of voltage sag compensation have been carried out using PSCAD/EMTDC for various faults. The simulation results confirm the validity of the proposed method and show the possibility of reducing the size of energy storage devices. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(3): 70–80, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10047     

充气集合式高电压并联电容器的几点改进

BAMHL1 1 /3- 72 0 0 - 1× 3W是在总结以往充气集合式高电压并联电容器产品优点的基础上 ,为优化大容量产品结构 ,提高绝缘可靠性和设备技术经济性能而开发的项目。本文着重介绍该产品的内部结构、外壳筋板结构和混合气体绝缘等几点改进。     

氯碱电解槽槽电压构成现状与进展

依据槽电压构成的诸多因素,介绍了目前槽电压构成的现状和进展。     

长距离管线监测系统的一种智能化过流防护方法

介绍了长距离管线监测系统的一种智能化过流防护方法，详细说明其电路设计原理及相关元件的选择，并与串联自复过流保护元件方式相比较，分析其整体性能，说明其具有响应速度快，安全可靠等特点。     

关于广义函数δ(x)的讨论

本文应用《电气子教学学报》之邀约而写，旨在针对一些读者对该韩过去刊出的有关广义函数δ(x）的文章中的质疑，从数学角度提供一些有助于正确认识、处理和运用广义函数的辅助材料。     

合成氨扩能改造中锅炉存在的问题及采取的措施

针对天脊集团年产30万t合成氨扩能改造,给2台225t/h高压锅炉带来的除氧器热量过剩、锅炉给水温度升高、主蒸汽温度降低等一系列问题,分析了产生问题的原因,从节约能源、提高锅炉效率考虑,提出了相应的解决问题的办法:利用热量分流、改造省煤器管、增加二级过热器受热面积。经过3年多的生产实践证明,取得了良好的效果。     

RanGen: A Random Network Generator for Activity-on-the-Node Networks

In this paper, we describe RanGen, a random network generator for generating activity-on-the-node networks and accompanying data for different classes of project scheduling problems. The objective is to construct random networks which satisfy preset values of the parameters used to control the hardness of a problem instance. Both parameters which are related to the network topology and resource-related parameters are implemented. The network generator meets the shortcomings of former network generators since it employs a wide range of different parameters which have been shown to serve as possible predictors of the hardness of different project scheduling problems. Some of them have been implemented in former network generators while others have not.