光纤专用网中基于DSP的Q值在线检测模块的设计

基于误码率与Q值的对应关系，本文介绍一种Q值在线检测方法，模块设计采用DSP技术，并讨论了该模块在光纤工业专用网（FIN）中的应用。     

网络信息安全技术综述

阐述了网络信息安全的三个组成方面,具体分析了在实际应用中的网络安全技术手段,探讨了国内外研究开发网络信息安全技术的现状、发展趋势及我们所应着重采取的策略.     

Accurate depth profiling through energy-dependent pulse height deficit compensation in gas ionization detectors

The impact of the pulse height deficit effect in gas ionization detectors on the accurate extraction of depth information from heavy ion elastic recoil detection spectra has been investigated. Thin GaN films and Ge_xSi_1−x/Si heterostructures have been analyzed with a 200 MeV ¹⁹⁷Au beam. Employing an empirical parameterisation of the pulse height deficit, a global energy calibration of the detector can be achieved. Energy spectra have been compared, calibrated with either a constant or a full energy-dependent compensation for the deficit. A constant compensation results in significant distortion of the extracted depth profile for heavier ions, whereas an energy-dependent compensation yields true concentration–depth profiles.     

Transient Green’s Tensor for a Layered Solid Half-Space With Different Interface Conditions

Pulsed ultrasonic techniques can be and have been used to examine the interface conditions of a bonded structure. To provide a theoretical basis for such testing techniques we model the structure as a layer on top of a half-space, both of different elastic properties, with various interface bonding conditions. The exact dynamic Green’s tensor for such a structure is explicitly derived from the three-dimensional equations of motion. The final solution is a series. Each term of the series corresponds to a successive arrival of a “generalized ray” and each is a definite line integral along a fixed path which can be easily computed numerically. Willis’ method is used in the derivation. A new scheme of automatic generation of the arrivals and ray paths using combinatorial analysis, along with the summation of the corresponding products of reflection coefficients is presented. A FORTRAN code is developed for computation of the Green’s tensor when both the source and the detector are located on the top surface. The Green’s tensor is then used to simulate displacements due to pulsed ultrasonic point sources of known time waveform. Results show that the interface bonding conditions have a great influence on the transient displacements. For example, when the interface bonding conditions vary, some of the first few head waves and regular reflected rays change polarities and amplitudes. This phenomenon can be used to infer the quality of the interface bond of materials in ultrasonic nondestructive evaluation. In addition the results are useful in the study of acoustic microscopy probes, coatings, and geo-exploration.     

城市现有地下管线探查及数据处理方法探讨

该文根据城市地下管线探查及数据处理方法现状 ,结合管线管理单位需要 ,对地下管线探查及数据处理方法中的有关问题进行了探讨 ,供今后管线探测工作借鉴     

Automated fluorimetry in quality control of pasteurized and ultra-high temperature-treated starch soup

Automated monitoring of the microbiological quality of heat-processed foods by the resazurin reduction test was applied to microtitration plate incubator-fluorimeter technology. The appearance and disappearance of the fluorescing peak of resorufin was monitored on microtitration trays. Pasteurized or ultra-high temperature-treated starch-based soup was used as the model food system. Bacillus subtilis spores (ultra-high temperature treatment) and vegetative cells of Enterococcus faecalis (pasteurization) were inoculated into the soup before the heat treatment at levels which resulted in some survival. The timing of appearance of maximum fluorescence correlated with the number of bacteria in pre-incubated samples. Automated resazurin-reduction fluorimetry was compared with conventional plating, turbidometry and microcolony count by the direct epifluorescent filter technique. The results of the resazurin test correlated well with those of all the other methods tested. Fluorimetry had the advantage that the results could be read within 1–5h and the reproducibility was superior to the other methods.     

一种用模拟信道进行数字通信的方法

本文介绍了一种利用现有机载模拟通信设备进行数字通信的高性能机载报警系统。文中，着重论述了该系统在编码和解码技术方面，提高报警信号的抗干扰性、保密性、防止误码以及提高传输距离等关键技术；较详细地介绍了系统的工作原理及调制解调电路的特点。     

线性联合检测算法在TD-SCDMA系统中的性能分析与比较

时分、同步码分多址（TD－SCDMA）系统是基于时分双工（TDD）的块传输系统，它使用了联合检测这项关键技术来抵抗符号间干扰（ISI）和多址干扰（MAI）。以上行链路为例，本文分析了三种线性联合检测算法－－匹配滤波块均衡器（MF－BLE）、迫零块均衡器（ZF－BLE）和最小均方误差块均衡器（MMSE－BLE）。从理论上，我们描述了这三种线性联合检测算法的基本原理，并对它们进行了比较（包括抗干扰性能和计算量）。随后，我们模拟了不同参数条件下（信道模型、码道数目、天线数目）这几种算法的性能，并与理论分析进行对照，得出一定结论。     

1100℃以上高温连铸板坯表面缺陷的模拟在线无损检测

高温状态下连铸板坯表面缺陷的在线无损检测在现代化的连铸坯热送－直轧工艺中对于保证铸坯的质量有着极其重要的意义。本文介绍了连铸坯高温探伤技术和相应的试验装置。采用涡流方法成功地模拟了１１００℃以上铸坯表面缺陷的动态检测，所用探头及检测设备均可在高温状态下长时间连续工作，能检测出深度为１．５ｍｍ，宽度为０．３ｍｍ，长为１０ｍｍ的表面缺陷，并能有效地抑制铸坯表面振动斑痕所产生的噪声影响。借助于计算机信号