空间交会对接用激光雷达敏感器

本文讨论了在航天飞行器的空间交会对接(RVD)技术中采用激光雷达敏感器的可行性。提出在航天飞行器的自主交会对接技术中,应采用一种简单、实用的单目标系统。     

电阻式电压传感器结构设计及误差特性研究

从路的角度分析了电阻式电压传感器的误差特性 ,从场的角度比较了几种结构方案的幅值误差、相角误差及最大场强 ,优化出最佳方案 ,并分析了该方案幅值误差的频率特性     

Relationship between CO2 Sensor Voltage Response and Phase Equilibrium of Solid Electrolyte Na, K-β/β"-Al2O3

A type of CO2 sensor based on oxygen concentration cell was designed as following: Cell I: Pt | Au, O2,CO2|Na2CO3(Au)|NKBA(Au)|YSZ|O2, CO2|Pt or Cell Ⅱ: Pt|Au, O2, CO2|K2CO3(Au)|NKBA(Au)|YSZ|O2, CO2|Pt.(Na,K-β/β″-Al2O3 is named by NKBA). The sensor signal is consistent with the Nernstian slope within the region ofphase equilibrium for Na, K-β/β"-Al2O3 material. The relationship between CO2 sensor voltage response and phaseequilibrium of solid electrolyte Na, K-β/β-Al2O3 is discussed in this paper.     

外焊缝自动跟踪系统

介绍了外焊缝自动跟踪系统的组成及工作原理，简述了传动部分ＧＴＲ－ＰＷＭ调速系统，给出了系统的硬件电路。该跟踪器具有结构简单，体积小，性能稳定等特点，在生产线上获得了成功的应用。     

Steady-state torque control system with secondary-current feedback for three-phase squirrel-cage induction motors

This paper presents a highly stable steady-state torque control system with a feedback of a secondary current signal. The torque control system is constructed with a feedback of the secondary current (I₂) signal using a quick response magnetic-field sensor constructed with an amorphous core multivibrator bridge, which can solve the secondary resistance change problem for temperature variation in the IM. Moreover, we added a state feedback to the system to improve the response speed for the unit step function of a torque order. The I₂ sensor method has advantages especially at a low-speed range, in which conventional method using an integrator shows control errors.     

一种新型的光纤位移传感器

测量平动物体位移的光纤传感器已有许多报导,而测量转动物体位移的光纤传感器却很少,从原理和实验两方面对后一问题作了研究。     

光纤式机器人触觉传感器静态特性的实验研究

介绍了一种光纤式机器人触觉传感器，分析了这种传感器的静态特性，并通过理论分析和实验研究提出了一种消除干扰的方法。实验结果证明，传感器的最大绝对误差为０．０５３ｋｇ，相对误差为０．６２％。     

An integrated intelligent machining system for axisymmetric parts using PC-based CAD and CAM software packages

Machining process planning involves the formation of a set of directions describing the machining operations required to transform raw stock into a finished part. Conventional process planning, performed manually, relies on the knowledge and competence of an experienced process planner and tends to be time consuming and error prone. In the past two decades, much effort has been spent on improving process planning by utilizing the power of a computer to emulate the capabilities of an experienced planner. During the same period, computer-aided design (CAD) and computer-aided manufacturing (CAM) software has been developed to enhance design productivity and to assist the NC code generation facets of the machining process. The entire planning process may be automated be integrating CAD and CAM using computer-aided process planing (CAPP). The research described in this paper outlines the design and development of an intelligent CAPP system integrating two commercial CAD and CAM software packages, Autocad and Mastercam.     

Hierarchical intelligent control with flexible AC transmission systems application

A novel hierarchical intelligent controller configuration is proposed using an artificial neural network as a control-mode classifier in the supervisory level and a set of pre-designed controllers in the lower level. Controller outputs are modified nonlinearly by the classifying signals in a structure resembling one artificial neuron with adaptively changed weights. The lower-level local controllers are implemented using neural networks. An illustrative example of this approach is based on the transient stabilization of a single-machine infinite-bus system studied in Flexible AC Transmission Systems (FACTS) research.     

光纤传感器在海洋环境监测中的应用

海洋是个特殊的环境,为许多光纤传感器提供了一个极好的应用领域。对于海洋这个特殊的“敌对”环境,光纤传感器将面临许多挑战。 本文着重介绍应用于海水温度、浊度、盐份浓度、浮游生物和溶解物光吸收量以及环境湿度等海洋环境参数监测的光纤传感器的原理、结构和特性,展望光纤传感器在海洋环境监测方面的美好前景。