Modeling of the bulk free radical polymerization up to high conversion—three stage polymerization model. II. Number-average molecular weight and apparent initiator efficiency

The equations for predicting the number-average molecular weight are derived on the basis of the three stage polymerization model (TSPM) in this paper. By applying the equations, a plotting approach is proposed to determine the apparent initiator efficiency defined as f[(α_td+1)/2] and the constant of chain transfer to monomer, where f is the initiator efficiency and α_td denotes the fraction of the termination rate constants by disproportionation. Using the approach to plot the experimental data in the literature, it is found that the chain transfer to monomer can be neglected for both methylmethacrylate (MMA) and styrene (St) polymerizations, but it can exert a significant effect on ethylmethacrylate (EMA) polymerization. In addition, the apparent initiator efficiency is found to be independent of reaction temperature and initiator concentration at each stage. The values of f[(α_td+1)/2] at gel effect stage are slightly reduced as compared with that at low conversion stage for MMA and EMA polymerizations. However, it decreases significantly at gel effect stage for St polymerization. Using the equations derived and the apparent initiator efficiencies obtained from TSPM plots, the number-average molecular weights at different conversions can be predicted. Comparisons show that the agreement between predictions and experimental data is satisfactory.     

Structure and properties of injection‐molded polypropylenes with different molecular weight distribution and tacticity characteristics

Two series of polypropylenes with different molecular weight distribution and tacticity characteristics were injection molded into flexural test specimens by varying cylinder temperature and the effects of the molecular weight distribution and tacticity on the structure and properties of the moldings were studied. Measured propertied were flexural modulus, flexural strength, heat distortion temperature, Izod impact strength, and mold shrinkage and structures studied were crystallinity, the thickness of skin layer, a*‐axis‐oriented component fraction and crystalline orientation functions. The relations between the structures and properties were also studied. It was found that the molecular weight distribution and tacticity characteristics affect the properties mainly through the molecular orientation and crystallinity, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2142–2156, 2002     

Thermally induced microstructural changes in cotton fibers: A free‐volume study

I measured positron lifetime in natural polymer–cotton fibers as a function of isochronal annealing temperature in the range 27–290°C. The variations in the positron results indicated structural changes occurring in the cotton fibers and determined the glass‐transition temperature as 80°C. Activation energies were measured separately for the crystalline and amorphous regions, indicating the versatility of the technique. These values were close to the O? H bond dissociation energy, suggesting O? H bond dissociation, the most probable process occurring under thermal treatment. As an extension of the positron results, the molecular weight of the cotton fibers was determined to be 1,200,000 based on free volume, which was within the range suggested for cotton. There seemed to be an indication that crosslinking changed the spiral structure of cotton fibers to the network type. However, this needs to be validated by other measurements. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3336–3345, 2002     

Effects of high molecular weight component on crystallization of polyethylene under shear flow

Crystallization of polyethylene (PE) blends of low and high molecular weight components under shear flow was studied using time-resolved depolarized light scattering (DPLS), focusing on effects of the high molecular weight component on the shish-kebab structure formation. Anisotropic two-dimensional scattering pattern due to shish-like structure formation was observed above a certain concentration of the high molecular weight PE. The threshold was about 2.5-3 times larger than the chain overlap concentration, suggesting an important role of entanglements of the high molecular weight component. On the basis of these results a gel-spinning-like mechanism for the shish-like structure formation has been proposed. The DPLS results also implied that the shish-like structure was mainly formed from the high molecular weight PE. This was confirmed by small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS) measurements on an elongated PE blend of low molecular weight deuterated PE and high molecular weight hydrogenated PE (3 wt%).     

悬索缆道(带铅鱼)在义棠水文站的应用

文中以山西省首家悬索自动化测流缆道在义棠水文站淤泥质河床的应用为例，叙述了该站缆道的设计、安装、试验研究的基本情况、设计指标、缆道总体布设、信号传输线路的设计及工作原理等。“失重”开关与河底开关的双重保险功能是解决我国北方地区淤泥质河床信号的产生与传输的关键。文中对此做了具体叙述，旨在为类似的缆道工程设计采用时参考。     

"Temporal encoding in fear conditioning revealed through associative reflex facilitation": Correction to Lindquist and Brown (2004).

Reports an error in "Temporal Encoding in Fear Conditioning Revealed Through Associative Reflex Facilitation" by Derick H. Lindquist and Thomas H. Brown (Behavioral Neuroscience, 2004[Apr], Vol 118[2], 395-402). The article contained several errors. On page 396, second paragraph, the sentence beginning on line 6 should read as follows: "Having a stable baseline is critical for studies of reflex facilitation because the experimental designs invariably entail repetitive CR testing, if only to achieve reasonable statistical power (see Choi et al., 2001b; Lindquist & Brown, 2004)." On page 400, the first heading should read as follows: "Comparison of New and Old Reflex Facilitation Procedures." On page 400, the first sentence under the abovementioned heading should read as follows: "We decided not to use the original measure of reflex facilitation, developed by J. S. Brown et al. (1951), because it suffers from severe interpretational limitations, elaborated in detail elsewhere (Choi et al., 2001b; Leaton & Cranney, 1990; Lindquist & Brown, 2004)." (The following abstract of the original article appeared in record 2004-12681-016.) Temporal encoding in Pavlovian fear conditioning was examined through conditional facilitation of the short-latency (Rl) component of the rat eyeblink reflex. Rats were fear-conditioned to a tone conditional stimulus (CS) with either a 3- or 9-s interstimulus interval (ISI) between CS onset and the onset of the grid-shock unconditional stimulus (US). Rl facilitation was tested over 2 days, in counterbalanced order, at a latency of 3 s and 9 s from CS onset. CS-produced Rl facilitation, the conditional response (CR), was 3-4 times larger when the test latency equaled the conditioning ISI. These results, coupled with the known neurophysiology of Rl facilitation, suggest that this CR could disclose differences in the time course of CS-generated output from the amygdala when driven by cortical versus subcortical CS-CR pathways. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effects of mastication on the distribution of molecular weights and on the mechanical properties of native and commercial dental gutta percha (trans-polyisoprene)

Mastication of gutta percha (trans-polyisoprene) resulted in the selective scission of molecules, producing a narrower distribution of lower molecular weights. The mechanical properties of the samples also underwent a significant change due to mastication. The greater the content of incompatible substances (salts and oxides) in commercial gutta percha. the more substantial were these effects. The atmosphere (air, N₂, O₂) in which the experiments were conducted yielded significantly different results. The decrease in molecular weight was far greater in an O₂ atmosphere than under a current of nitrogen or air, owing to the combination of double bonds with O₂.     

基于熵权的料场方案模糊多属性优选研究

砂石料场方案选择中存在着许多难以精确度量的模糊性因素，常规的平衡法、系统分析法很难对此进行有效的处理。将模糊数学理论应用于砂石料场的方案选择，提出了熵权与模糊理论相结合的砂石料场方案优选方法，重点对标准化属性矩阵的产生、主客观权重结合得到综合权重及相对接近度的计算等几个方面进行了说明，并通过实例验证了该方法的可行性与实用性。     

利用单片机80c196kc实现等间隔采样及采样值的回显

本文主要介绍以单片机80c196kc为CPU对模拟信号进行等间隔采样以及实现对采样值回显的问题。详细介绍了测频软件及电路的实现，对等间隔采样软件实现进行了详细论述：详尽讨论了对于MG-12864-2液晶显示器的电路连接与软件控制方法；对MG-12864-2液晶显示器应用的独特之处做了细致的分析。