非平稳时序循环平稳趋势提取与机械故障诊断

在简单介绍非平稳时序模型周期趋势项提取方法的基础上，提出了机械故障诊断和分析方法，该方法利用旋转机械出现故障以后所呈现的循环平稳特性，使用循环平稳分析方法剔除非平稳时间序列模型中的趋势项，然后建立平稳时序模型，用该模型进行机械故障诊断分析。并运用仿真和实例对方法的正确性进行了验证。     

软起动器和变频器的时分多机复用技术及其应用

本文提出了时分多机复用的概念，并对其技术和应用加以具体说明，展现了该技术良好的应用前景。     

12Cr2MoWVTiB钢焊后热处理工艺改进的研究

研究了焊后热处理保温时间对12Cr2MoWVTiB钢的显微组织及力学性能的影响。结果表明,在其它条件不变的情况下,焊后热处理保温时间由原来1.5h缩短为1h,既可以满足其组织性能的要求,又缩短了生产周期,降低了生产成本。     

Model checking response times in Networked Automation Systems using jitter bounds

Response time (RT) of Networked Automation Systems (NAS) is affected by timing imperfections induced due to the network, computing and hardware components. Guaranteeing RT in the presence of such timing imperfections is essential for building dependable NAS, and to avoid costly upgrades after deployment in industries.This investigation proposes a methodology and work-flow that combines modelling, simulation, verification, experiments, and software tools to verify the RT of the NAS during the design, rather than after deployment. The RT evaluation work-flow has three phases: model building, modelling and verification. During the model building phase component reaction times are specified and their timing performance is measured by combining experiments with simulation. During the modelling phase, component based mathematical models that capture the network architecture and inter-connection are proposed. Composition of the component models gives the NAS model required for studying the RT performance on system level. Finally, in the verification step, the NAS formal models are abstracted as UPPAAL timed automata with their timing interfaces. To model timing interfaces, the action patterns, and their timing wrapper are proposed. The formal model of high level of abstraction is used to verify the total response time of the NAS where the reactions to be verified are specified using a subset of timed computation tree logic (TCTL) in UPPAAL model checker. The proposed approach is illustrated on an industrial steam boiler deployment.     

高效动态存储再分配方案与实现

为提高大小和数量都不确定的数据动态存储的空间利用率和处理速度,针对常规系统动态存储分配存在的问题,提出一种高效的动态存储再分配方案。通过减少系统动态存储分配的执行次数,在有效提高存储空间利用率的同时,提高存储空间动态分配的速度,给出动态存储再分配方案的具体实现算法,用实际数据对其性能进行测试。测试结果表明,该方案能节省36％至75％的系统存储空间,分配速度提高了20至50倍。     

基于高能效及公平性的移动设备定位算法

通过分析校园师生基于GPS的真实活动轨迹,以及何种算法才最适合具有自私性的移动用户展开合作,提出一种高能效及用户公平定位技术.通过采用代理设备合作思想,提出一种集中式最优算法,在保证固定精度界限和设备公平的基础上,实现移动设备GPS时间平均功率最小化.通过控制退避时间和GPS关闭时间,提出一种分布式准最优算法.最后,基于多种拓扑结构进行全面的仿真实验,验证了算法的高能效性和公平性.     

基于Feeds的社交网络活跃度分析

从用户产生和消费Feeds的角度分析社交网络变得不活跃的原因,通过分析人人网某大学社区用户长周期的Feeds行为来探讨该社区用户活跃度的变化。通过对用户活跃性周期和Feeds时间间隔的分析,发现越来越多的用户产生Feeds的活跃度在下降,并导致其他用户接收到的信息流的流速和多样性下降。社交网络用户由于各种原因离开或变得不活跃,并通过信息流对其朋友圈形成负向反馈,这可能是社交网络变得不活跃的深层原因。模拟实验表明,30%的初始不活跃用户会使得整个社区的信息流快速下降,并导致整个社区不活跃。     

Performance comparison of reduced models for leak detection in water distribution networks

This paper presents a methodology for comparing the performance of model-reduction strategies to be used with a diagnostic methodology for leak detection in water distribution networks. The goal is to find reduction strategies that are suitable for error-domain model falsification, a model based data interpretation methodology. Twelve reduction strategies are derived from five strategy categories. Categories differ according to the manner in which nodes are selected for deletion. A node is selected for deletion according to: (1) the diameter of the pipes; (2) the number of pipes linked to a node; (3) the angle of the pipes in the case of two-pipe nodes; (4) the distribution of the water demand; and, (5) a pair-wise combination of some categories.The methodology is illustrated using part of a real network. Performance is evaluated first by judging the equivalency of the reduced network with the initial network (before the application of any reduction procedure) and secondly, by assessing the compatibility with the diagnostic methodology. The results show that for each reduction strategy the equivalency of networks is verified. Computational time can be reduced to less than 20% of the non-reduced network in the best case. Results of diagnostic performance show that the performance decreases when using reduced networks. The reduction strategy with the best diagnostic performance is that based on the angle of two-pipe nodes, with an angle threshold of 165°. In addition, the sensitivity of the performance of the reduced networks to variation in leak intensity is evaluated. Results show that the reduction strategies where the number of nodes is significantly reduced are the most sensitive.Finally this paper describes a Pareto analysis that is used to select the reduction strategy that is a good compromise between reduction of computational time and performance of the diagnosis. In this context, the extension strategy is the most attractive.     

On input‐to‐state stability‐based design for leader/follower formation control with measurement delays

This paper addresses the design of low‐level controllers for leader–follower formations of nonholonomic vehicles in the presence of bounded measurement delays. The concept of input‐to‐state stability is extended to encompass the effect of bounded delays and restrictions on the input. A method is proposed to integrate a Smith predictor in a backstepping design on the basis of nested saturations and nonlinear small‐gain assignment, which allows for time delays in the feedback loop. Robustness analysis under uncertain bounded time delays is provided, and design tradeoffs resulting from the use of bounded controls are discussed. Illustrative simulations are shown to validate the design and robustness analysis in the context of a simple leader–follower trailing control problem. Copyright © 2012 John Wiley & Sons, Ltd.     

Stabilization of One‐Dimensional Schrödinger Equation with Variable Coefficient under Delayed Boundary Output Feedback

This article considers stabilization of a one‐dimensional Schrödinger equation with variable coefficient and boundary observation which suffers from an arbitrary given time delay. We design an observer and predictor to stabilize the system. The state is estimated in the time span where the observation is available, and also predicted in the time interval where the observation is not available. It is shown that the estimated state feedback stabilizes the system exponentially. A numerical simulation is presented to illustrate the effect of the stabilizing controller.