Use of a sex attractant and an inhibitor for monitoring winter moth and bruce spanworm populations

A single sex pherormone component was isolated from abdominal tip extracts of female Bruce spanworm.Operophtera bruceata (Hulst). This was identified as (Z,Z,Z)-1,3,6,9-nonadecatetraene by capillary gas chromatography (GC), electroantennography, and mass spectrometry. In addition, hexane extracts of female abdominal tips from Bruce spanworm and the winter moth.O. brumata L., were analyzed by GC coupled to an electroantennographic detector (GC-EAD). The extracts ofO. bruceata andO. brumata females elicited only a single response, at the same retention time, from antennae of their conspecific and reciprocal males. In field tests conducted in Saskatchewan, traps baited with the synthetic tetraene captured Bruce spanworm males. In tests carried out on Vancouver Island, British Columbia, where the two species coexist, both Bruce spanworm and winter moth males were captured. The attractancy of lures containing the synthetic pheromone alone and in combination with several structurally related analogs was field tested at both locations. One of these, an isomer of the natural pheromone, (E,Z,Z)-1,3,6,9-nonadecatetraene, inhibited the capture of Bruce spanworm males but had no effect upon the number of winter moth males which were taken. Thus, populations of these two very similar species can be distinguished by employing traps baited with pheromone ± the inhibitor. Coneorifice Hara traps were found useful for field trapping males of both species.Issued as NRCC No. 26107     

Transition phenomena of polymers in mixed solvents in the vicinity of theta conditions: Effect of preferential adsorption

Viscosimetric measurements were obtained with the ternary systems polystyrene/dioxane/methanol, polystyrene/benzene/methanol and poly(methyl methacrylate)/dioxane/cyclohexane, changing the solvent mixture composition at constant temperature. The polystyrene and poly(methyl methacrylate) systems exhibit a transition phenomenon with solvent-mixture composition in which the polymer is just above the theta condition. In the case where two theta conditions occur ((θ-intra, θ-inter) the transition point is closely related to the intramolecular theta conditions. Moreover the intramolecular theta conditions vary with the molecular weight in the region of molecular weights where the preferential adsorption also varies. This variation induces a variation of the transition point with molecular weight which obeys a formula analogous to that giving the variation of the preferential adsorption with molecular weight.     

Organolithium route to poly(arylsilane)s

Various poly(arylsilane)s The poly(carbosilane)s prepared in this way are of higher molecular weight than when prepared by the Wurtz-type condensation route previously reported. TG shows 40–50% overll weight loss attained at 500–600°C.     

PBT共混改性研究最新进展

综述了最近几年国内外聚对苯二甲酸丁二醇酯(PBT)共混改性的研究进展,分类介绍PBT/聚烯烃、PBT/同系聚酯、PBT/液晶、PBT/弹性体、PBT/聚碳酸酯等不同共混体系,讨论了各体系中的相行为、相容性、热稳定性、力学性能等,并对该类共混物的发展趋势作了简要的分析。     

Simulation of carbon nanotube based p-n junction diodes

Taking advantage of the unique characteristics of an ambipolar carbon nanotube field effect transistor (CNTFET), a ‘p-n junction’ is simulated along the single-walled carbon nanotube channel using two separate gates close to the source and drain of the CNTFET, respectively. The current-voltage characteristics of the double-gated CNTFET are calculated using a semiclassical method based on the Schottky barrier field effect transistor mechanism. The calculation results show a good rectification performance of the p-n junction.     

Decentralized weighted control for a class of large‐scale systems with multi‐modes

In this paper, the control synthesis problem for a class of large‐scale systems with multi‐modes that are called large‐scale switched systems is addressed. By introducing the concept of decentralized switching signal and the relevant decentralized average dwell time, the asymptotic stability and weighted ?₂ gain performance are investigated. It should be noted that the decentralized switching covers general switching cases for large‐scale switched systems, namely, it admits both time‐dependent switching signal and arbitrary switching signal blended in the decentralized switching. Then, on the basis of the analysis results, the decentralized weighted control scheme including state feedback controller gains and switching signals is studied. Several design algorithms are proposed to meet different controller design problems. Finally, numerical examples are provided to illustrate theoretical findings within this paper. Copyright © 2013 John Wiley & Sons, Ltd.     

A generalized robust H ∞ filtering for singular Markovian jump systems and its applications

In this paper, a generalized robust H _∞ filtering method is proposed for a class of singular Markovian jump systems, whose generality is mainly embodied that the desired filter could bear perturbances in terms of uncertainties on its parameter matrices. Firstly, an LMI condition of robust mode‐dependent filter is developed. Based on the given result, a new approach to mode‐independent H _∞ filter is presented, which establishes a direct connection between mode‐dependent and mode‐independent filters. Secondly, when the transition rate matrix is with elementwise bounded uncertainties or partially unknown, sufficient conditions of such robust mode‐dependent and mode‐independent filters are all developed within LMI frameworks. Finally, a numerical example is used to demonstrate the effectiveness of the proposed methods. Copyright © 2013 John Wiley & Sons, Ltd.     

A minimum variance distortionless response filter based on the bifrequency spectrum for single-channel noise reduction

This paper deals with the problem of single-channel noise reduction in the short-time Fourier transform (STFT) domain. Many algorithms have been developed to solve this important problem, most of which generally assume that the STFT coefficients in different frequency bands are uncorrelated, so the noise reduction is achieved by applying a gain function to the STFT of the noisy speech in each frequency band. However, this assumption is not accurate and the STFT coefficients of speech signals between neighboring frequency bands are correlated in practice due to the use of small lengths of the fast Fourier transform (FFT) and overlap add/save techniques in implementation. This paper formulates the noise reduction problem by taking into account the interband correlation using the so-called bifrequency spectrum. Based on this formulation, a single-channel minimum variance distortionless response (MVDR) filter is derived, which is shown to be able to significantly improve the signal-to-noise ratio (SNR) and meanwhile maintain the desired speech not much distorted. Simulations are presented to justify the claimed merits of the developed MVDR filter.     

Polysulphone and poly(phenylene sulphide) blends: 1. Thermal characterization and phase morphology

The phase behaviour and morphology of injection moulded specimens of polysulphone (PSF) and poly(phenylene sulphide) (PPS) blends were studied by differential scanning calorimetry (d.s.c.), dynamical mechanical thermal analysis (d.m.t.a.) and transmission electron microscopy (TEM). The blends are phase separated regardless of the blend composition as revealed by d.s.c., d.m.t.a. and TEM. Upon annealing at 160°C for 2 h, d.m.t.a. results indicate that the PPS phase remains in the amorphous state at compositions <10%. At compositions between 20 and 35%, the PPS appears to be dispersed in a mixed mode of amorphous and crystalline domains. Above 35% the PPS phase appears to become fully crystallized upon annealing of the blends. At 10% PPS, TEM results showed 35–200 nm size dispersion both in the as-moulded and in the annealed specimens. At 20% the PPS phase varied widely in size, from 35 nm to tens of micrometres but remained as an included phase. TEM also revealed a compound morphology of the included phase at a composition of 50 wt% of each component.