Cu-Cr合金高温氧化行为分析

该文用热分析天平，结合金相、X射线衍射(XRD)、扫描电镜(SEM)和能谱(EXD)研究了Cu—Cr合金在不同温度下的氧化行为。结果表明，Cu—Cr合金在700℃-900℃氧化符合抛物线规律，其最外层氧化膜为CuO，内层为Cu2O和Cr2O3，铬有助于提高合金的抗氧化能力。     

催化裂化大油气管线阻焦剂的研究与开发

介绍了阻焦剂的阻聚分散机理，测定了不同组分的阻焦剂对不同性质原料的阻焦效果，并考察了不同加入浓度对阻焦率以及催化裂化产品分布的影响。试验结果表明：加入50—100μg/g的阻焦剂，可使催化裂化大油气管线阻焦率达到53．7％—63．8％，同时对产品分布及产品性质无不良影响，具有技术经济可行性。     

郑411块超稠油试油试采工艺技术应用

郑411块沙三段地层疏松出砂、原油粘度高，属中深层超稠油，常规试油试采方法难以突破出油关，采用APR全通径氮气垫测试、地层与井筒复合防砂、水平井配合直井蒸汽吞吐、氮气泡沫封堵调剖和井筒加热举升稠油等配套工艺技术，取得了较好的效果，为中深层超稠油油藏的开发提供了技术思路。     

Composite scale modeling in the presence of censored data

A composite scale modeling approach can be used to combine several scales or variables into a single scale or variable. A typical application is to combine age and usage together to form a composite timescale model. The combined scale is expected to have better failure prediction capability than individual scales. Two typical models are the linear and multiplicative models. Their parameters are determined by minimizing the sample coefficient of variation of the composite scale. The minimum coefficient of variation is hard to apply in the presence of censored data. Another open issue is how to identify key variables when a number of variables are combined. This paper develops methods to handle these two issues. A numerical example is also included to illustrate the proposed methods.     

Ti_3Al金属间化合物的熔盐热腐蚀

采用电化学方法并结合扫描电镜、X 射线衍射、电子探针和能谱等物相分析技术研究了 Ti_3Al 金属间化合物在800℃熔融 NaCl-(Na,K)_2SO_4体系中的腐蚀行为。结果表明,Ti_3Al 合金耐熔盐腐蚀性能远低于 Ni 基 IN738合金。腐蚀时在合金表面形成外层为 TiO_2;内层为富 Nb 的Nb_2O_5,Al_2O_3,TiO_2的混合层和中间层为富 Al 的 TiO_2,Al_2O_3混合层的多层腐蚀层结构。Ti 快速向外扩散和氧向内扩散使合金表面腐蚀产物层迅速增厚。腐蚀产物内层的富 Nb 氧化物破坏了膜层与合金基体的粘附性。     

Dynamic elastic-plastic behaviour of whipping pipes: experiments and theoretical model

This paper is concerned with the problem of pipe whip, the dynamic response of a high pressure piping system subjected to an end force as the result of a pipe break which releases a jet of fluid from the broken section. Both experimental and theoretical results are presented concerning the dynamic elastic-plastic behaviour of cantilever pipes subjected to a transverse force pulse at the free end. Comparisons between experimental data and theoretical predictions are made for mild-steel pipes with outer diameter-to-thickness ratios of 19.5, 28 and 32. It is demonstrated that, for these geometries, the whipping pipes display three characteristically different responses, viz. elastic, plastic hardening behaviour for thick pipes, elastic, plastic hardening-softening behaviour for moderately thick pipes and elastic, plastic hardening-softening-collapse behaviour for thinner pipes. The experimental data taken from a series of high-speed films are compared with the predictions of the instantaneous shapes of the whipping pipes derived from both a rigid, perfectly-plastic, large deflection, dynamic beam model and a more comprehensive model which incorporates the effects of elasticity and plastic hardening and softening, the details of which are presented in the paper.     

提高润滑油基础油氧化安定性的组合工艺

以生产润滑油基础油的老三套工艺为基础，开发了改善油品氧化安定性的组合工艺。该工艺的主要特点是包括一步络合脱氮过程。实验证明，该组合工艺既可以有效地提高基础油的氧化安定性，又能降低溶剂精制深度，提高基础油收率。     

用参数泵分步结晶制取精萘的新工艺及放大

采用参数泵分步结晶工艺，开发了直立弹状流气泡管结晶器，由工业萘提纯制取精萘。实验室研究和放大试验的研究表明，产品纯度大于９９％，收率大于９２．５％。弹状气泡强化了传热和传质过程，流体的均布是放大过程的关键。     

十万立方米储罐用高强钢SPV490Q的冬季焊接施工

通过对高强钢焊接性能的分析 ,提出了高强钢冬季焊接施工带来的问题及处理办法。可靠的焊前预热和焊后保温是确保冬季焊接施工质量的关键措施     

武钢 3×10~4m~3/h 空分手动变负荷生产的探索与实践

对武钢引进的两台３×１０４ｍ３／ｈ空分设备，为改变其自动变负荷生产调节范围小、时间长的问题，采用了人工手动变负荷的操作方法。实践表明：扩大了增减产范围，缩短了调节时间，有十分明显的综合经济效益，可供大型空分变负荷生产借鉴参考。