基于不确定决策树分类算法在滑坡危险性预测的应用

滑坡灾害预测受多种因素影响,其中降雨等不确定因素存在难以获取数据及有效处理等难题,为提高滑坡危险性预测的准确率,根据滑坡灾害发生相关理论及决策树分类原理,提出了基于不确定决策树算法在滑坡危险性预测的方法.该方法引入不确定因子降雨,并将不确定因子和其余评价因子一起,根据不确定决策树算法理论构建出不确定决策树,建立滑坡危险性等级预测模型,并用延安市宝塔区的实例进行验证.实验结果表明,该预测方法取得了较高的总体精度和有效精度,达到了滑坡预测的精度标准,且两项预测精度均高于传统C4.5决策树方法.     

超声波传感器在沙子料位检测中的应用

为提高混凝土的质量,配比很重要,其中沙子精确计量是关键因素之一。提出并设计了超声波系统测量沙子料位;为保证测量精度,采取自动增益控制电路和温度补偿。经实验证明:该方法简单、可行,为沙子质量的检测提供了一种新的参考方法。     

利用神木不粘性块煤炼制炭质还原剂

本文介绍利用神木不粘结性块煤炼制优质铁合金专用焦，通过对块焦的筛分组成分析、工业分析和灰分分析，焦炭的反应性能、比电阻、强度、石墨化程度研究，证明该煤炼制的块焦具有比电阻高，灰分、硫、磷、铝和高温下石墨化程度低的优点。该焦可代替冶金焦冶炼铁合金。     

河工模型量测控制系统设计与应用——以赣江下游尾闾整治工程为例

赣江下游尾闾综合整治工程物理模型建于室外,且模拟河流多级分叉,对整个模型测控系统运行的可靠性以及室外的防雷性能提出了更高的要求。在分析现场情况的基础上,提出了一套较为先进的模型量测控制系统总体设计方案,控制系统由平水塔供水系统、流量控制系统、水位与流速测量系统、尾门控制系统、防雷接地系统、地形测量系统等量测子系统组成。简要介绍了各测量子系统工作原理,设计方案及实际应用情况,系统应用现代网络技术及高性能自动化测量仪器,可实现模型试验中各种参数的实时采集、控制和数据处理。试验结果表明,该测控系统可满足模型试验的测控需求。     

Reliability analysis of a repairable duplex system

We analyse the survival time of a repairable duplex system characterised by cold standby and by a pre-emptive priority rule. We allow general probability distributions for failure and repair. Moreover, an important realistic feature of the system is the general assumption that the non-priority unit has a memory. This combination of features has not been analysed in the previous literature. Our (new) methodology is based on a concatenation of a Cauchy-type integral representation of the modified Heaviside unit-step function and a two-sided stochastic inequality. Finally, we introduce a security interval related to a security level and a suitable risk-criterion based on the survival function of the system. As a practical application, we analyse some particular cases of the survival function jointly with the security interval corresponding to a security level of 90.     

Continuous Levels‐of‐Detail and Visual Abstraction for Seamless Molecular Visualization

Molecular visualization is often challenged with rendering of large molecular structures in real time. We introduce a novel approach that enables us to show even large protein complexes. Our method is based on the level‐of‐detail concept, where we exploit three different abstractions combined in one visualization. Firstly, molecular surface abstraction exploits three different surfaces, solvent‐excluded surface (SES), Gaussian kernels and van der Waals spheres, combined as one surface by linear interpolation. Secondly, we introduce three shading abstraction levels and a method for creating seamless transitions between these representations. The SES representation with full shading and added contours stands in focus while on the other side a sphere representation of a cluster of atoms with constant shading and without contours provide the context. Thirdly, we propose a hierarchical abstraction based on a set of clusters formed on molecular atoms. All three abstraction models are driven by one importance function classifying the scene into the near‐, mid‐ and far‐field. Moreover, we introduce a methodology to render the entire molecule directly using the A‐buffer technique, which further improves the performance. The rendering performance is evaluated on series of molecules of varying atom counts.     

非均匀卵砾石粗糙床面的分形特征

针对传统方法刻画粗糙床面总体特征存在缺陷的问题,将分形几何理论引入非均匀卵砾石粗糙床面特征研究,以卵砾石床面激光扫描试验资料为基础,探讨了分形尺度区宽度与中值粒径d50的关系,分析了覆盖基准面对分形维数的影响,研究了床面整体与局部分形维数的特征与联系,获得了分形维数随床面颗粒组成及高程统计参数的变化规律。结果表明:分形尺度区宽度与床面颗粒中值粒径d50有关,上临界尺度可取为1.5d50;分形维数与覆盖基准面位置有关,覆盖基准面距平均床面的距离越大,分形维数越大且逐渐失真,为有效量化和区分床面粗糙特征,覆盖基准面宜取平均床面;粗糙床面分形维数具有良好的稳定性,局部分形维数变异性很小,并与整体分形维数接近;粗糙床面的分形维数与颗粒大小、级配组成及床面高程统计参数有关,中值粒径越大,颗粒组成越均匀,床面高程极差、标准差、偏度(绝对值)和峰度越大,分形维数越小。     

库水升降速率对老蛇窝滑坡稳定性影响分析

通过监测资料分析和滑坡稳定性数值计算,探讨了三峡库水位在不同升降速率下对老蛇窝滑坡稳定性的影响规律。研究结果表明,理论上库水位上升有利于老蛇窝滑坡的稳定,但实际运行中库水位上升是不利于滑坡稳定的,因为库水浸泡会使滑坡前缘塌岸;老蛇窝滑坡为动水压力型滑坡,最主要诱发因素为库水位的下(骤)降;老蛇窝滑坡稳定性的临界库水位调度速率为0.9 m/d,即当库水位下降速率大于0.9 m/d时,滑坡K值小于1。     

Limits of compensation in a failed antenna array

In large antenna arrays, the possibility of occurrence of faults in some of the radiating elements cannot be precluded at all times. In such situations, the radiation pattern of the array gets distorted, mostly with an increase in sidelobe level and decrease in gain. Although it is not possible to restore the pattern fully by rearranging the excitations of the functioning elements, compensation methods have been reported in the literature for restoring one performance parameter of the array and making a trade‐off on some other parameter. In this article, we have made a study on the tolerance level of this compensation process. One part of the study deals with the thinning in the failed array, that is, to find a limit on the minimum number of functioning elements of the array that can restore the digital beamforming of the failed array. The second part of study deals with finding the maximum number of element failures that can be compensated. The study was carried out by optimizing the amplitude excitations of the failed array. Instead of classical optimization techniques, particle swarm optimization was used for the compensation process. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:635–645, 2014.     

供电企业配电线路故障及策略

通过分析供电线路安全运行的影响因素,提出了防范故障的策略,希望能够对配电线路的安全运行提供帮助。