Density measurements on levitated liquid metal droplets

Electromagnetic levitation is a useful tool for measuring thermophysical properties of high-temperature melts such as liquid metals. Due to its noncontact nature, the undercooled regime is also accessible. Density and thermal expansion of a levitated drop can be derived from volume measurements, if its mass is known. Assuming cylindrical symmetry, the volume of a drop can be determined from its cross section. Using photography, such measurements on liquid metals have been performed in the past. Here we present an improvement of this method, which replaces the photographic camera with a CCD videocamera and subsequent digital image processing. This reduces the time effect required to obtain the results and allows one to average over disturbing surface oscillations. The specific problems of digital image processing, namely resolution and edge detection, are addressed and results on nickel are presented.Paper presented at the Fourth International Workshop on Subsecond Thermophysics, June 27–29, 1991, Köln, Germany.     

垂直定向液晶光阀及光电特性的研究

系统地讨论了排列相畸变模式液晶光阀结构，原理和制作，结合实际测试对其等效电路和电学匹配进行了分析，详细讨论了它的光电特性及相互关系，实测的液晶垂直排列方式工作的液晶光阀性能指标为，分辨率大于５０ｌｐ／ｍｍ，白光输入灵敏度为６．７７μＷ／ｃｍ＾２，响应时间为２００ｍｓ／３００ｍｓ，白光输出对比度为２００：１。     

铸造高性能合金的显微组织及耐腐蚀行为

对铸造高性能合金Lewmet55进行了化学成分设计，确定了该合金中镍、铬、钼、铜和硅的含量。采用金相显微镜和X射线衍射相结合的方法，分析了该合金的显微组织，并采用多种腐蚀试验方法研究其耐腐蚀行为。着重研究了不同热处理制度对铸造高性能合金的均匀腐蚀、晶问腐蚀、点蚀和电化学腐蚀性能的影响。试验结果表明，Lewment55合金经1250℃×1．5h水冷固溶处理后，在高温浓硫酸介质中具有良好的耐蚀性，以及较好的抗晶间腐蚀、点蚀和电化学腐蚀性能。     

Al2O3—TiB2陶瓷刀具材料的高温氧化及其对刀具耐磨性能的影响

研究了Ａｌ２Ｏ３－ＴｉＢ２陶瓷刀具材料在１０００℃下的氧化行为，用ＸＲＤ、ＳＥＭ分析了氧化后的相组成及显微结构。结果表明：Ａｌ２Ｏ３－ＴｉＢ２陶瓷材料在１０００℃空气中氧化增重符合抛物线规律；随ＴｉＢ２含量的增加，该材料的抗氧化能力下降。     

A prediction method for thermal conductivity of alternative refrigerants in the liquid phase

A prediction method for the thermal conductivity of halocarbon refrigerants in the saturated liquid state in the reduced temperature range 0.3 to well above 0.9 is presented in this paper. The aim of the method is to present a very simple calculation of the transport property useful for engineering purposes. The method determines thermal conductivity as a sole function of the reduced temperature and requires the knowledge of a parameter dependent upon easily available physical constants characteristic of each compound. The method is validated against experimental data available in the literature, giving average absolute deviations which are usually less than 5%, with maximum absolute deviations generally less than 10%. An extension of the method to estimate thermal conductivity of binary mixtures is also presented, along with a comparison with the few experimental data available in the literature.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

液相对流对固液界面稳定性的影响

以模型合金丁二腈－乙醇的强制性晶体生长为基础，利用自行研制的液相对流驱动装置，详细考查了液相自然对流及强迫对流作用下，模型合金平界面失稳的动态生长过程，证实了液相的流动加快了液相温度与浓度分布的均匀化，从而增强了液／固界面的稳定性。并且随流动速度的增加，界面稳定性提高。     

MIM隧道结的电子输运特性和发光研究

论述作为一种新型发光器件的ＭＩＭ隧道结的发光机理，报告了该器件的发光现象和Ｉ－Ｖ特性曲线中负阻现象的实验观察。数据显示，结中表面等离极化激元（ＳＰＰ）与粗糙度的耦合是引起光发射的主要方面，ＳＰＰ对隧穿电子的阻塞作用导致了电子输运中的负阻现象。此外，还观察到了直接辐射的紫外峰。     

几种火焰喷焊自熔性合金层的耐磨性能

研究了不同自熔性合金粉末火焰喷焊层的显微组织与抗磨粒磨损性能，并对其磨面形貌进行了ＳＥＭ观察分析。结果表明，在Ｎｉ６０自熔性合金中加入适量的镍包ＷＣ粉末可明显提高其喷焊层的抗磨粒磨损性能。当ＷＣ的加入量为３５％（ｗｔ）左右时，该喷焊层与６０Ｓｉ２Ｍｎ调质钢相比，相对的耐磨性可提高６倍以上。     

正庚烷-甲苯-三甘醇三元体系液-液相平衡数据的测定与关联

利用气相色谱法测定了常压下２５℃、４０℃和５０℃时正庚烷－甲苯－三甘醇体系的液－液相平衡数据，采用峰面积归一化法定量，所得数据准确、可靠。用ＮＲＴＬ模型对所测数据进行了热力学关联，求出了相应的模型参数。用该模型对本三元体系进行了预测，结果令人满意。     

碳钢与不锈钢表面高浓度渗铬法

在氩气气氛下，应用固体渗铬填料法对碳钢、不锈钢作了表面高铬浓度的渗铬处理，探讨了渗铬温度、时间和渗铬组分对渗层表面铬含量、厚度，试样增重和物相组分影响，碳钢、不锈钢的表面渗铬浓度分别达８０－９４ｗｔ％和７０－８２ｗｔ％。