An ice slurry generation system was developed using direct contact heat transfer between water and the coolant, Fluroinert FC-84. The location of the coolant nozzle is an important design consideration to avoid clogging due to freezing of water. An ice fraction of up to about 40 percent was obtained with the nozzle located at the bottom of the ice slurry tank and the jet directed upwards into the water. Two simplified model were developed to extract the heat transfer coefficient between the coolant drops and the water. The first model requires as input the average drop diameter and the residence time while the second model uses the measured drop diameter distribution. The estimated heat transfer coefficients are much smaller than those computed using single-sphere correlations. 相似文献
Home storage is the final step of the frozen foods distribution chain, and little is known on how it affects the products quality. The present research describes frozen green beans (Phaseolus vulgaris, L.) quality retention profile during the recommended ‘star marking’ system dates, at the storage temperatures of +5, −6, −12 and −18 °C (along 1, 4, 14 and 60 days, respectively).
The quality profile was assessed by a simulation system. Simulations were set by a response surface methodology to access the effect of different packaging materials (thermal conductivities and thickness), surface heat transfer coefficient, and refrigerator dynamics (effect of refrigeration cycles at the different storage temperatures) on the average retentions of Ascorbic Acid, total vitamin C, colour and flavour.
Green beans quality losses along frozen storage are significantly influenced by temperature, refrigerator dynamics and kinetic properties. Quality is also highly dependent on packaging materials thermal insulation (e.g. at temperatures above the melting point). Temperature cycles inside frozen chambers have a long term effect, and at the higher storage temperatures (e.g. T>−6 °C) are detrimental to frozen green beans quality after shorter periods. 相似文献
Analysis on steady-state and transient heat transfer on a flat plate at the middle of a parallel duct immersed in He II was performed for bath temperatures from 1.8 to 2.1 K at 101.3 kPa. Two-dimensional computer code named SUPER-2D developed by the authors based on the two-fluid model and the theory of mutual friction was used. Steady-state critical heat flux (CHF) and the time lag from the application of a step heat input to λ transition, that is called a lifetime, were obtained numerically for various step heat fluxes and for the channel gaps from 2 to 20 mm. Effect of the gap restriction on the CHF and the lifetime were clarified. The solutions were compared with the experimental data for the ducts with the same structures and the corresponding conditions. They agreed well with the experimental data. The heat transport mechanism in the parallel duct was clarified. 相似文献
We study the stressed state of an inhomogeneous welded joint containing an interlayer of a more high-strength material under the action of tensile loads. It is assumed that the contact boundary has a cracklike defect. We deduce analytic dependences of the fracture load on the mechanical inhomogeneity of the joint, thickness of the interlayer, and depth of the defect. The maximum depth of the defect to which the joint is insensitive is established. The proposed theoretical results are innovative and agree with the experimental data obtained for specimens cut out from a pipe of 14KhGS steel. 相似文献
We discuss some different ideas about the sort of formalism appropriate for translation (more specifically, transfer) that have been explored within Eurotra. The intention is not to evaluate these different ideas, but to outline the issues of general interest and relevance that they raise. Section 1 describes some common assumptions, section 2 describes the different ways they have been interpreted, and section 3 considers some further implications. 相似文献
This article presents the development of a ceramic micro heat exchanger. Starting from its geometrical design, results obtained from a simplified simulation of the heat exchanger efficiency will be given. The alumina microcomponents were manufactured by a rapid prototyping process chain. Here, stereolithography was combined with a low‐pressure injection molding process for the rapid and precise manufacturing of ceramic components down to the micrometer range. A micro heat exchanger, joined from sintered components using a glass solder, was applied as a prototype and checked for its performance at a system pressure of 8 bar. 相似文献
According to the knowledge partitioning framework, people sometimes master complex tasks by creating multiple independent parcels of partial knowledge. Research has shown that knowledge parcels may contain mutually contradictory information, and that each parcel may be used without regard to knowledge that is demonstrably present in other parcels. This article reports 4 experiments that investigated knowledge partitioning in categorization. When component boundaries of a complex categorization were identified by a context cue, a significant proportion of participants learned partial and independent categorization strategies that were chosen on the basis of context. For those participants, a strategy used in one context was unaffected by knowledge demonstrably present in other contexts, suggesting that knowledge partitioning in categorization can be complete. (PsycINFO Database Record (c) 2010 APA, all rights reserved) 相似文献
Digital monochromatic images are encoded using a novel minimum mean square error (MSE) linear predictive transform (LPT) coding formulation. The new formulation is appealing for two important reasons. First, it leads to simple coder implementation with a satisfactory signal-to-noise ratio (SNR). Second, it provides a general theoretical framework from which minimum MSE predictive coding and minimum MSE transform coding arise as special cases. Some specific results of this paper that illustrate the previous ideas are: a simple and generally suboptimum two-dimensional LPT coder operating at 2 bit pixer−1 has approximately one third the complexity of a 4 × 4 Hadamard coder while yielding a better SNR; an optimum 2D LPT coder operating at 2 bit pixer−1 has approximately one sixth the complexity of a 4 × 4 Karhunen-Loeve transform (KLT) coder while yielding a better SNR. 相似文献