Development of a sequential robust–tolerance design model for a destructive quality characteristic

Robust design (RD) and tolerance design (TD) have received much attention from researchers and practitioners for more than two decades, and a number of methodologies for modeling and optimizing the RD and TD processes have been studied. However, there is ample room for improvement. Because most existing research considers RD and TD as separate research fields, the primary objective of this paper is to develop a sequential robust–tolerance design method to jointly determine the best factor settings and the closed-form solutions for the optimal specification limits. We then apply the proposed method to a destructive quality characteristic. Finally, a case study and sensitivity analyses are performed for verification purposes, and further studies are discussed.     

Stable local dimensionality reduction approaches

Dimensionality reduction is a big challenge in many areas. A large number of local approaches, stemming from statistics or geometry, have been developed. However, in practice these local approaches are often in lack of robustness, since in contrast to maximum variance unfolding (MVU), which explicitly unfolds the manifold, they merely characterize local geometry structure. Moreover, the eigenproblems that they encounter, are hard to solve. We propose a unified framework that explicitly unfolds the manifold and reformulate local approaches as the semi-definite programs instead of the above-mentioned eigenproblems. Three well-known algorithms, locally linear embedding (LLE), laplacian eigenmaps (LE) and local tangent space alignment (LTSA) are reinterpreted and improved within this framework. Several experiments are presented to demonstrate the potential of our framework and the improvements of these local algorithms.     

一种粗糙集属性约简算法

基于粗糙集理论提出一种新的属性重要度的度量方法,引入决策强度的概念,克服经典粗糙集理论约简定义的不完备性及无法获得最优属性约简的缺陷,改进基于信息熵的启发式属性约简算法,通过对既有线CTCS-2级车站列控中心软件测试平台的测试数据的实证分析,成功获得最优属性约简,发现数据之间的潜在联系及规律,给出决策规则,使决策分析更为高效。     

无线传感器网络中的选择转发攻击检测

针对无线传感器网络中现有检测攻击方法需要节点协同或检测硬件的缺点,对选择转发攻击进行研究,提出一种基于信任度与丢包行为的检测方法。通过节点收发数据包的情况,计算节点的信任度,结合节点丢包行为评估,判断节点是否发动攻击。这种检测方法的计算与存储开销都集中于基站,且不需增加额外的检测设备。实验结果表明,这种方法较之现有检测方法,检测率更高。     

Thermal and cardiovascular strain imposed by motorcycle protective clothing under Australian summer conditions

Motorcycle protective clothing can be uncomfortably hot during summer, and this experiment was designed to evaluate the physiological significance of that burden. Twelve males participated in four, 90-min trials (cycling 30 W) across three environments (25, 30, 35 °C [all 40% relative humidity]). Clothing was modified between full and minimal injury protection. Both ensembles were tested at 25 °C, with only the more protective ensemble investigated at 30 and 35 °C. At 35 °C, auditory canal temperature rose at 0.02 °C min^?1 (SD 0.005), deviating from all other trials (p < 0.05). The thresholds for moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 min (SD 20.6) and 180 min (SD 33.0), respectively. Profound hyperthermia might eventuate in ~10 h at 30 °C, but should not occur at 25 °C. These outcomes demonstrate a need to enhance the heat dissipation capabilities of motorcycle clothing designed for summer use in hot climates, but without compromising impact protection.

Practitioner’s Summary:

Motorcycle protective clothing can be uncomfortably hot during summer. This experiment was designed to evaluate the physiological significance of this burden across climatic states. In the heat, moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 and 180 min, respectively.     

Model reduction of multi-scale chemical Langevin equations

This paper addresses the model reduction problem for a class of stiff chemical Langevin equations that arise as models of biomolecular networks with fast and slow reactions and can be described as continuous Markov processes. Initially, a coordinate transformation is sought that allows the decoupling of fast and slow variables in the model equations. Necessary and sufficient conditions are derived for such a linear transformation to exist, along with an explicit change of variables which achieves the desired decoupling. For the systems for which this step is applicable, the method of adiabatic elimination is applied to determine a representation of the slow dynamics. Theoretical concepts and results are illustrated with simple examples.     

Identification and control of open-loop unstable processes by relay methods

This paper describes a reliable automatic PID tuning method for open-loop unstable processes. Identification with low order models is performed by means of two relay tests, one with an additional delay, which does not require a priori knowledge about the process, with the only necessary condition being that the process be gain stabilisable. This paper provides an overview of the method, states conditions that need to be satisfied for its successful implementation, and demonstrates its application on a number of examples.     

Aromatic Hydrogenation Catalysis: A Review

High aromatic content in diesel fuel has been recognized both to lower the fuel quality and to contribute significantly to the formation of undesired emissions in exhaust gases [1, 2]. Because of the health hazards associated with these emissions, environmental regulations governing the composition of diesel fuels are being tightened in both Europe and the United States, leading to limitations on aromatics [3, 4].     

Effective dimensionality of cuprate superconductors

A novel optical method for accurate monitoring of the carrier densityN in layered conductors is introduced. It is applied to several cuprate superconductors, and it is found thatT _c doesnot scale withN. However, if the closely spaced pairs or triplets of CuO₂ planes were coupled together to act as distinct metallic slabs, the relevant variable could ben, theslab carrier density. Indeed, we found thatT _c does scale nicely withn. This suggests that high-T _c superconductivity is effectively a two-dimensional phenomenon; it can occur in a cuprate slab which is only one unit cell thick. Finally, estimates are obtained for the length scales of localization of charge carriers:d 8 Å andd 2 Å in all the cuprates under study.     

Livelocks in parallel programs

This paper is the second of a two-part series exploring the subtle correctness criterion of the absence of livelocks in parallel programs. In this paper we are concerned with the issue of proving this correctness criterion. It is shown that livelocks are not preserved by reduction, implying that reduction cannot be used directly in proving the absence of livelocks. Two applicable proof techniques are also presented. One is based on the notion of establishing sufficient conditions for livelock-freedom; the other is an extension of the well-founded set method for proving termination in sequential programs.