Buckling optimization of hybrid-fiber multilayer-sandwich cylindrical shells under external lateral pressure

This paper describes a method of analyzing the maximum buckling strength of hybrid-fiber multilayer-sandwich cylindrical shells under external lateral pressure with respect to fiber orientations and weighting factors. Formulae for optimizing these parameters are presented and conditions for the application of these formulae are discussed. A discriminant is derived for assessing whether the hybrid sandwich cylindrical shells for given different unidirectional composites should reach the extreme value of critical pressure.     

基于神经网络的模拟电路故障诊断优化近似方法

本文提出了线性电阻电路故障诊断的一种神经网络优化方法。其基本思想是应用Ｈｏｐｆｉｅｌｄ网络原理来处理Ｌ１范数问题，以此来进行诊断。对实例的计算证明此法是可行的。     

中高频小功率电子元器件用非晶材料的开发与应用

随着电力和电子技术的飞速发展，相应的元器件向高频化，小型化，高效率和节能的方向发展，从而对元器件用材料也提出了更高要求。为此，本文概述了冶金部钢铁研究总院近年来所研究的用于开关电源，脉冲变压器，传感器，电流互感器和电感器等方面的非晶软磁合金的性能及其应用概况。     

话音ATM交换的实现─—ATM论坛电路仿真系列建议

近年来，随着ATM主干网络的建设和发展，研究ATM对现有通信业务的支持方式和适配技术是目前ATM技术研究的热点之一。话音ATM交换在降低话音通信成本和简化网络操作环境等方面提供了大量的技术手段，并且支持在单一网络环境中的多种综合业务传输。ATM论坛制定了电路仿真系列建议，话音ATM交换的技术已经基本成熟。文章通过对话音ATM交换在实现和优化方面的技术进行分析，并提出一种基于NativeModeATM的话音通信方式。     

无源软开关电路拓扑的研究

提出一个研究无源软开关电路的新技术方法;其特征是对基本的单管隔离型PWM DC/DC变换器进行类比分析,由此直接导出可行的缓冲能量再生复位电路.该新方法能使DC/DC PWM硬开关变换器转变为软开关变换器.以新型Boost无源软开关变换器为例,进行了电路理论分析与中功率样机的实验测试;结果表明此新变换器具有较宽的软开关工作范围、较低的电应力、较小的缓冲元件量值等特点.由此认为,这种研究方法推导简单、物理意义清晰,还能深入地研究无源软开关的新电路拓扑.     

三维方腔流的混合有限分析解

本文建立了三维对流扩散方程的混合有限分析八点隐格式，并证明了它的基本数学性质。应用原函数法和交错网格技术给出了三维Ｎ—Ｓ方程的混合有限分析解法，计算了雷诺数Ｒｅ＝２０、５０和１００三种情况下的三维方腔内的流场，结果与已有计算成果一致。     

电荷灵敏放大器不用反馈高值电阻的新方法

本文提出了一种电荷灵敏放大器不用反馈高值电阻的新方法。对这种方法作了电路分析以及对实际电路的测量结果作了介绍。     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.     

Development of a suitable model for characterizing photovoltaic arrays with shaded solar cells

The aim of this study is to investigate the effects of non-uniform solar irradiation distribution on energy output of different interconnected configurations in photovoltaic (PV) arrays. In order to find which configuration is less susceptible to mismatch effects, a PV module model is developed. This model can take into consideration the effects of bypass diodes and the variation of the equivalent circuit parameters with respect to operating conditions. The proposed model can provide sufficient degree of precision as well as solar cell-based analysis in analyzing large scale PV arrays without increasing the computational effort. In order to produce more reliable and robust simulations, improved and extended algorithms are presented. Some results are discussed in detail and some recommendations are extracted by testing several shading scenarios.     

电动钻机的工作理论基础(一)--系列专题之七

近年来，电驱动已成为石油钻机的主要驱动形式，是钻机自动化、智能化的坚实平台。文章就电动钻机的部分工作理论作初步剖析，包括钻机工作机组对电驱动的要求，可控硅直流电驱动和交流变频电驱动的工作原理，直流电动机和交流变频电动机等的特性分析，电动机的四象限运行和能耗制动原理等。