高压带电体温度检测装置

针对传统高压带电体测温方法存在的难以实现电气绝缘、精度低等问题,介绍了一种新型高压带电体温度检测装置的设计方案。该装置采用传统接触式测温方式下的温度传感器采集温度信号,采用可调电流源+感生电源方式实现供电,各感生电源与可调电流源通过高压线连接,不同测温点的感生电源之间没有电气连接,且采用光纤传输温度信号,从而很好地实现了电气绝缘。实验结果表明,该装置的感生电源电压稳定,测温精度高,抗干扰能力强。     

Electrical conductivity,self-diffusion,and volume expansion of alkali halides at the melting point

In an earlier paper, Heisenberg's uncertainty principle was invoked at the melting point T _m of crystalline solids to provide fundamental justification for Lindemann's melting law and to compute diffusion coefficients of several alkali halides. The uncertainty principle defines breakdown of Debye zone boundary (ZB) phonons as valid collective excitations when phonon energies and line widths due to anharmonicity become comparable at T _m. Upon breakdown, random, high-frequency single-particle motion or partial decoupling of crystal ions sets in. Lifetimes of these single-particle ZB motions are determined from the minimum-uncertainty product inequality by assuming that it becomes an equality at T _m for ZB phonons. The present paper addresses improved formulation of that work and extended application to ionic electrical conductivities of 18 molten alkali halides at T _m. It is shown that use of the Debye model produces an approximate lower bound to the mean free time, not the unconstrained direct estimate previouslu implied. This feature is generally reflected in results for ionic conductivities and alkali halide diffusion coefficients for which comparison experimental data were found. However, in spite of this lower-bound formulation and the simple nature of the computation, the results compare favorably with experiment. A model of random single-particle harmonic motion superimposed on the lower-frequency collective motion is proposed to account for volume expansion accompanying the partial decoupling for hard-sphere ions. Experimental comparisons for 15 alkali halides show the decoupling volume change to account largely for the total volume change of melting (in the hard-sphere approximation), yielding a closer agreement with experiment than recent calculations aimed explicitly at the total volume change.Paper presented at the Tenth Symposium on Thermophysical Properties, June 20–23, 1988, Gaithersburg, Maryland, U.S.A.     

A universal dependence for thermal conductivity of metals and dilute alloys

A universal curve relating the maximum of thermal conductivity and its respective temperature with the residual electrical resistivity has been proposed for metals and dilute alloys. Based on the equation of that curve, a comparative analysis of selected literature data of thermal conductivity of metals, which have residual electrical resistivity in the range 10^–11<₀<10^–5. cm, have been performed. Using the data for 33 metals, confirmation of the Wiedemann-Franz law for the impurity component/T of thermal conductivity was obtained, which means that _th/_el1, where _th and _el are the parameters of the electron-lattice defect interaction obtained from measurements of thermal and electrical conductivity, respectively. Examples of the failure of the Wiedemann-Franz law are also presented, exhibiting the values of _th/_el in the range 0.16 to 25. Measurements of thermal conductivity in the range 2 to 20 K and determination of the residual electrical resistivity for the samples of Cd doped with Zn and quenched were performed, resulting in values _th/_el1.     

X射线机不是计量器具

计量学的基本理论指出，X射线机不具有计量器具的属性。国家的计量法规并未将X射线机定为计量器具。目前存在的JJG 40—2001《X射线探伤机》检定规程，将X射线探伤机与X射线检测技术相互混淆，将X射线探伤机的某些技术性能，说成所谓的X射线探伤机的“计量性能”，不仅违反计量学基本理论，而且也不符合射线检测技术实际。从计量学理论和射线检验实际经验只能得到X射线机不是计量器具的结论。     

深海带电插拔连接器力学特性分析

以水下7 000 m工况的深海带电插拔连接器为研究对象,旨在获得湿插拔连接器在深海双重高压下的受力特性和插拔过程中的动密封性能。介绍连接器的插头结构与压力补偿技术;推导压力补偿器工作容积的计算公式;运用Ansys Workbench建立插头内壳体组件与插孔组件的动密封有限元模型,对内壳体、压力平衡膜及内胆进行强度计算;分析由连接器插拔引起的平衡膜内外瞬时压差对膜的应力分布及变形情况;讨论密封件径向压缩量、密封接触面摩擦因数、插拔速度对插拔过程中动密封性能的影响。结果表明:插头插合时,平衡膜外表面应力基本不变,其变形减小;拔出时,平衡膜外表面的应力及变形都逐渐增大。密封件之间的接触压力受密封接触面过盈配合量的影响明显,增大过盈配合量可显著提高动密封区域的接触压力及密封性能,同时也会加剧密封件失效的可能性,密封接触面的摩擦因数、插拔速度对接触压力的影响则较小。     

热压烧结Ti3AlC2材料的制备、结构与性能研究

采用热压工艺研究了不同工艺制度和原料中不同的Si含量对Ti3AlC2合成的影响.研究表明在1 300℃～1 500℃,30MPa压力和Ar气氛中热压摩尔比为n(TiC)n(Ti)n(Al)n(Si)=2110.2的混合粉末,可以得到纯度达98%(质量分数)以上的致密块体Ti3AlC2材料;添加的Si均匀分布在基体中,形成固溶体,当添加Si的摩尔比为0.2时,固溶体的化学式为Ti2 76Al0 78Si0.22C2.烧结试样的晶体为层片状结构,1 300℃和1 400℃时,烧结试样的晶粒尺寸分别为10μm～15μm和20μm～30μm.材料的维氏硬度为3.3 GPa～5.0 GPa,弹性模量为289 GPa,抗压强度为785 MPa,抗弯强度为375 MPa,断裂韧性为7.0 MPa·m1/2;25℃时,电导率为3.1×106 S·m-1,热容为125.4 J/mol·K,热导率为27.5 W/m·K;热膨胀系数为8.8×10-6 K-1.     

智能温度控制仪在铝电解铸造保温炉上的应用

简要介绍了KX-C智能温控仪的性能、特点;结合铝电解铸造保温炉的控制要求,阐述了KX-C智能温控仪对保温炉的恒温控制过程。应用表明,该仪器由于具有控制准确、动作灵敏、接线简单、无需校准、成本较低、可靠性高、无需维护等优点,可很好满足实际生产的要求。     

综合管廊电气工程的相关问题研究

城市综合管廊是现代城市建设的重要综合系统,其电气工程设计工作需要关注供电电源、接地系统、照明设计、电气设备防潮、电缆敷设等关键环节。     

光伏发电接入对配电网低压台区线损的影响

随着可再生能源的不断开发,越来越多的光伏发电接入配电网,而光伏发电的不稳定性会对配电网的稳定造成影响。为此,针对光伏发电对配电网低压台区线损的影响,建立了电源接入模型并进行了仿真计算。     

不同添加剂对AgSnO2In2O3触头材料电性能的影响

采用内氧化法工艺制备了不含添加剂及分别含添加剂CuO或TeO2的3种AgSnO2In2O3触头材料。应用模拟继电器试验设备检测了这3种材料在AC230 V、25 A阻性负载条件下的电寿命、熔焊力、电弧能量、燃弧时间、质量侵蚀率等相关电性能参数,并对检测结果及试验后铆钉触头样品进行了分析。研究发现:与不含添加剂的AgSnO2In2O3材料相比,添加剂CuO对材料的电寿命影响不大,而添加剂TeO2明显提高了材料的电寿命;含添加剂的两种材料的熔焊力和电弧能量均有了不同程度的降低,但它们的质量侵蚀率却明显增加。