Experience of Using Energy Effects in Ore Preparation and Concentration of Ferruginous Quartzites

The possibility is considered for changing the physico-mechanical and technological properties of ferruginous quartzites of the Mikhailovsk deposit by means of dosed energy actions.     

基于CPLD的双速双回路磁力起动器BCD码检测技术

采用MAX-EPM7128SLC84-15芯片实现双速双回路磁力起动器BCD码的检测,设计了逻辑原理图,给出了部分软件程序,实现了CPLD(ComplexProgrammableLogicDevice)技术在人机对话中的应用。实践表明:采用CPLD技术检测BCD码传输数据准确,保密性能良好,具有较高的应用价值。     

工艺参数对磁力搅拌-化学沉积Ni-P-SiC镀层的影响

用磁力搅拌-化学沉积的方法,在45钢表面沉积Ni-P-SiC镀层。研究了SiC微粒添加量、搅拌速率以及镀液温度等对镀层硬度和表面形貌的影响,借助扫描电子显微镜(SEM)对镀层进行观察。结果表明:当SiC的质量浓度为10 g/L时,镀层显微硬度最大(615.2HV);当磁力搅拌速率为300 r/min时,镀层的显微硬度最大(632.8HV)。磁力搅拌-化学沉积Ni-P-SiC镀层的最佳工艺参数为:SiC添加的质量浓度10 g/L,搅拌速率300 r/min,温度85℃。     

Fe73.5Cu1Nb3Si13.5B9纳米晶软磁粉体的制备工艺与微波电磁性能

研究热处理工艺、材料粒度对Fe73.5Cu1Nb3Si13.5B9材料微波电磁性能的影响,对该类材料的微波电磁性能和吸波性能进行测试。结果表明:热处理工艺对材料的微波电磁性能产生较大的影响,达到晶化条件的热处理工艺有利于提高材料的电磁性能;随着材料粒度的减小,微波电磁性能提高,电磁参数之间的匹配性提高;Ⅴ级粒度材料的最低反射率达到-12 dB,低于-5 dB的频宽达12.5 GHz。     

基于熵权模糊评判的自行火炮作战效能评估

为评估自行火炮复杂的效能指标对作战效能的影响,运用熵权模糊评判法对作战效能进行综合评判、分析。根据效能评估结果可知我军自行火炮的优势和不足,通过对指标性能的改进,将会提高其作战效能。不仅评估了我军自行火炮的作战效能,也检验了我军装备发展的国际水平,为我军装备发展找到差距,为今后的发展指明方向。     

低碱度含FeO渣热分解H2O/CO2制取H2/CO

以转炉钢渣为原料,通过高温重熔获得不同碱度渣样并开展H₂O/CO₂氧化试验,在获得H₂/CO气体能源的同时改善渣样磁性,提升渣综合利用率。试验结果表明,随着碱度增加,析出主要物相从橄榄石到镁蔷薇辉石最终向硅酸二钙转变,与此同时,固溶在其中的RO相逐渐溶出。相同亚铁含量下,高碱度渣样能够大幅度改善氧化反应效率,碱度1.83渣样最高产气量为H₂ (32.3 cm3/g)、CO (22.1 cm3/g),反应率分别达到了83.7%、57%,碱度1.13的渣样反应率分别仅为 40.5%、32%。氧化后的渣样磁选效率均有提高,碱度2.13渣样从14.85%增加到78.75%。     

0.08mm厚中频用取向硅钢极薄带制作工艺研究

文章介绍了利用我厂生产的0.27 mm厚普通取向硅钢(CGO)作为原料制作0.08 mm厚中频用取向硅钢极薄带的工艺研究过程,着重研究了不同退火温度与机组运行速度(即保温时间)的热处理工艺对取向硅钢磁性能的影响,确定了以900℃×10 m/min为最佳的热处理工艺,获得了取向硅钢极薄带的磁感应强度B 8=1.846 T,铁损P 1.5/400=11.15 W/kg,矫顽力H c=53.57 A/m的良好中高频电磁性能的制作工艺。     

低温高磁感取向硅钢热轧板通电加热织构研究

通过对低温高磁感取向硅钢热轧板通电加热处理,发现将热轧板以55℃/s从室温加热到1 000℃后降温,在1 000～950℃降温过程中保持时间2～5 s,可以获得与常化工艺等效的热轧板织构组分,根据所得结果,讨论了在热轧轧机后段增加电加热装置,从而代替常化工艺生产高磁感取向硅钢的可能性.     

磁性高分子微球的制备及在分析化学中的应用进展

在总结近年来国内外有关磁性高分子微球研究成果的基础上,阐述了磁性高分子微球的结构类型、特点、目前的各种制备方法、袁征以及在分析化学领域的最新应用进展,指出了当前研究中需要解决的问题.     

High-Resolution NMR and Magnetic Resonance Imaging (MRI) Studies on Fresh and Frozen Cod ( Gadus morhua) and Haddock (Melanogrammus aeglefinus)

Changes in the fish muscle from cod ( Gadus morhua ) and haddock ( Melanogrammus aeglefinus ) were investigated by high-resolution NMR and magnetic resonance imaging (MRI). Water- and salt-soluble extracts from fish stored at −20°C and −30°C were analysed by high-resolution proton NMR and enabled the identification of metabolites including trimethylamine oxide, trimethylamine (TMA) and dimethylamine. It was not possible to detect formaldehyde by NMR either in the stored fish samples or in spiked water or salt extracts even at high levels of formaldehyde addition, probably due to polymerisation. Systematic and controlled storage trials indicated the presence of dimethylamine at around 9 months for samples stored at −20°C, whereas no changes were detected at the control storage temperature of −30°C. A comparison of cod and haddock fillets stored for 1 year at −20 and −30°C confirmed the production of dimethylamine only in cod stored at −20°C. It was interesting to note that ‘fresh’ cod and haddock samples purchased from a local supermarket showed high levels of TMA indicating a breakdown of trimethylamine oxide to TMA by bacteria. TMA was not detected in the fish fillets especially obtained for the storage trials. MRI of fresh cod and fish stored at −8 and −30°C indicated that the fish half stored at −8°C exhibited dense lines or arches which are indicative of gaps in the tissue due to possible breakdown of the connective tissue. The images of fish stored at −30°C did not indicate any differences compared with the fresh fish. MRI also showed the presence of frozen and unfrozen areas in the fish non-destructively.