变压器漏磁热损的光纤Bragg光栅检测与温升特性分析

变压器的漏磁场强度随着变压器容量的增大而增大,漏磁场强度越大在变压器各结构中引起的漏磁损耗越大,导致变压器运行效率低下,进而影响变压器的正常运行。对35 kV变压器进行试验,将漏磁产生最大处的温度与油箱产生顶端处的温度进行了对比,试验得出当开风机时该处与油箱顶端处的最高温度差为8.7℃、当负荷降至1倍功率时温差为2.9℃,它们的实时温度曲线图与变压器的运行一致,产生了局部温升的现象。通过光纤Bragg光栅（ FBG）检测温度的变化反映变压器漏磁的情况,从而实现了对变压器漏磁的实时在线监测。     

高灵敏巨磁阻抗小型磁传感器研制

利用单辊快淬法制备了CoFeNiSiB非晶薄带,经过400 A/mm2电流密度、20 ms脉冲间隔条件下的脉冲退火后具有较好的弱磁场灵敏性能.以该带材为磁敏材料,基于纵向驱动方式研制了一种巨磁阻抗(GMI)磁传感器,该磁传感器尺寸小、灵敏度高、频率响应好,±0.05 mT弱磁场范围内灵敏度可达到44.15 V/mT,在高灵敏度小型磁传感器领域具有较大的应用潜力.     

嵌入豁口磁芯的13.56MHzRFID读写器天线

本文针对天线线圈产生的磁场强度分布不均匀的现象,提出一种增强天线局部磁场强度的方案.首先,本文从理论出发解释了高频磁场的趋肤效应;其次,基于高频磁场的趋肤效应,提出往线圈中央添加开了豁口的金属磁芯,用以增强磁芯边缘和豁口位置的磁场强度;最后,通过三维电磁仿真软件AnsoftHFSS和MATLAB软件研究不同张角的豁口磁芯对环形天线的磁场强度的影响,旨在找出最优豁口的设计方案,对实际设计的13.56MHz RFID读写器天线具有一定的参考价值.     

基于行人运动模态辨识的室内外无缝导航航向算法研究

目前行人导航航向解算算法均基于导航传感器在行人身体上的固定安装模式,或者依赖其他射频信息辅助修正陀螺航向,这极大约束了导航传感器的适用条件.为此,利用陀螺对低频噪声的敏感性及加速度计低频的稳定性,提出了解决行人手持手机稳态查看与非稳态摇摆的运动模态辨识算法和基于时域互补滤波器实现姿态的最优融合方法;研究了改进型互补滤波以消除行人的运动加速度对姿态解算的干扰误差,提高了载体姿态的测量精度;此外,利用磁传感器标定后的数据设计了自适应卡尔曼滤波算法,抑制了航向角的误差发散.经实际数据测试验证,室内外行人手持稳态与非稳态下的航向角测量精度提高了80%,同时大大提高了导航传感器的适用性与便携性,满足实际工程的使用需求.     

Potensoft: MATLAB-based software for potential field data processing, modeling and mapping

An open-source software including an easy-to-use graphical user interface (GUI) has been developed for processing, modeling and mapping of gravity and magnetic data. The program, called Potensoft, is a set of functions written in MATLAB. The most common application of Potensoft is spatial and frequency domain filtering of gravity and magnetic data. The GUI helps the user easily change all the required parameters. One of the major advantages of the program is to display the input and processed maps in a preview window, thereby allowing the user to track the results during the ongoing process. Source codes can be modified depending on the users' goals. This paper discusses the main features of the program and its capabilities are demonstrated by means of illustrative examples. The main objective is to introduce and ensure usage of the developed package for academic, teaching and professional purposes.     

高灵敏度金属分离器传感线圈的设计

分析了电感线圈探测金属的理论,针对传统的金属探测传感器灵敏度低,抗干扰能力差和结构复杂的缺点,根据电磁感应原理提出了一种具有高探测精度和高抗干扰能力的新型金属探测传感器,并描述了其结构和材料设计方案。最后用试验验证了设计思想和设计方案的正确性和实用性。     

共轴圆线圈和圆板的互感系数计算

本文给出了同轴圆线圈和圆板间互感系数的近似函数表达式。并用Matlab绘制了该互感系数随线板间距离和圆板大小的变化曲线。此外,根据磁感应强度的解析表达式,计算了载流线圈的磁力线分布图,分析了其磁感应强度的分布,并给出了它的径向分布曲线。     

Optoelectronic device for reading of hidden magnetic information from the holograms

The model of the device of reading (visualization) of the hidden magnetic information from the holograms combined with magneto-optical layer is presented in the article. Ways of magnetic images formation on the protected documentation and their reading by magneto-optical methods are proposed. The reading head with the help of magneto-optical meridional Kerr effect allows to observe visually of “effect of blinking” from the hologram with the hidden magnetic layer. During the work the mathematical analysis magneto-optical Kerr or Faraday effects was carried out. The hidden magnetic image based on:

The use of an electrothermal plasma gun to simulate the extremely high heat flux conditions of a tokamak disruption

Disruption damage conditions for future large tokamaks like ITER are nearly impossible to simulate on current tokamaks. The electrothermal plasma source SIRENS has been designed, constructed, and operated to produce high density (> 10²⁵/m³), low temperature (1–3 eV) plasma formed by the ablation of the insulator with currents of up to 100 kA (100 s pulse length) and energies up to 15 kJ. The source heat fluence (variable from 0.2 to 7 MJ/m²) is adequate for simulation of the thermal quench phase of plasma disruption in future fusion tokamaks. Different materials have been exposed to the high heat flux in SIRENS, where comparative erosion behavior was obtained. Vapor shield phenomena has been characterized for different materials, and the energy transmission factor through the shielding layer is obtained. The device is also equipped with a magnet capable of producing a parallel magnetic field (up to 16 T) over a 8 msec pulse length. The magnetic field is produced to decrease the turbulent energy transport through the vapor shield, which provides further reduction of surface erosion (magnetic vapor shield effect).     

Semiempirical and ab initio conformational analysis of 2-methylene-8,8-dimethyl-1,4,6,10-tetraoxaspiro[4.5] decane with application of GIAO-SCF methods to NMR spectrum interpretation

The GIAO-SCF method for calculating isotropic nuclear magnetic shielding values has been utilized to explain certain features in the ¹H-NMR spectrum of 2-methylene-8,8-dimethyl-1,4,6,10-tetraoxaspiro[4.5] decane. Population distributions of the low-energy conformers based on their ab initio energies were used to produce weighting factors for the individual calculated shielding values to calculate the weighted average of the shielding values for a complete set of conformers. The differences in ¹H chemical shifts between the hydrogens of the two methyl groups and between the axial and equatorial hydrogens in 2-methylene-8,8-dimethyl-1,4,6,10-tetraoxaspiro[4.5] decane were shown to be due to energy differences between the chair and boat orientations of the six-membered ring and contribution from a twist-boat conformation. Results suggest a hypothesis that intramolecular differences in chemical shift might be calculated to a greater degree of accuracy than chemical shifts calculated relative to a standard.