南水北调中线总干渠水头优化分配

南水北调中线总干渠渠道线路长,建筑物数量大、类型多,进行水头优化分配对于节省工程投资,合理的进行总干渠工程布置有着重要的意义.通过优化计算,提出了总干渠水头优化分配方案,确定了3个渠段之间的水头分配值以及各段内分段渠道和各个建筑物的水头分配值,并对方案进行了验证.     

Adhesive Contact of a Membrane with a Hemispherical Indenter: Theoretical Analysis and Model Liquid System

The axisymmetric Laplace equation is solved numerically to extract contact-angle data for a flat liquid/vapor interface contacting a submerged hemispherical solid. The liquid/vapor interface is treated as a membrane, with a membrane tension equal to the surface energy of the liquid. By measuring the vertical displacement of the membrane and the projected contact area the membrane makes with the hemisphere, the contact angle and correspondingly the driving force for motion of the contact line can be measured. We show that characteristic receding and advancing contact angles can be obtained by measuring the contact radii formed upon initial contact between the interface and hemisphere and final contact just prior to detachment of the interface, respectively. Use of the technique is illustrated with a model experiment involving the contact of an air/water interface with a poly(methyl methacrylate) surface.     

Thermography of aged contacts of high voltage equipment

New developments in diagnostic tools and systems are necessary for a reliable and economic evaluation of the condition of equipment in power systems. In a research project a tool for the condition of contacts of centre break disconnector, which is used under normal operation by the aid of a thermography measurement system, has been developed. In this paper, an overview about the laboratory investigation of the temperature load behaviour and the environmental influence on-site for new and aged disconnector contacts are given. A condition evaluation tool for contacts, which was the aim of the project, has been created. The basic method for the evaluation is presented, and also two additional easements for a fast identification of suspect contacts are presented. With this evaluation tool and the usage of a thermography based measuring system, a condition based maintenance strategy can be applied, whereby an early detection of damages is possible and so power quality and reliability increase.      

Surface designing of polypropylene by critical monitoring of the grafting conditions

The grafting of acrylic acid onto electron beam‐irradiated polypropylene was carried out using preirradiation method. The stability of peroxy radicals was investigated by electron spin resonance. It was found that the decay of peroxy radicals is much faster at 70°C than at 40°C and ambient temperature. The grafting has been observed to be strongly dependent on the monomer dilution in the reaction medium. The grafting was ascertained by attenuated total reflectance (ATR). The distribution of grafts across the samples was monitored by infrared microscopy. It was found that the graft management is considerably influenced by composition of the grafting medium. The grafting involving pure monomer leads to the surface enrichment with the polyacrylic acid chains. The samples grafted in pure monomer led to much lower contact angles as compared to the diluted monomer solution. The swelling of the grafted samples also showed a trend that was governed by the graft management. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 546–553, 2006     

硬粒子对聚合物材料表面的冲击摩擦研究

冲击摩擦为接触面切向与法向冲量之比。用聚合物材料试件与弹簧钢片组成振动测试系统 ,硬粒子以一定入射角冲击试件水平面引起系统振动 ,接触冲量通过振幅反映出来 ,记录初始振幅值而计算出一个冲击过程的冲击摩擦因数。结果表明 ,当入射角α在 2 5°-60°变化时 ,冲击摩擦因数f从 0 .5降至 0 .2左右。文章同时分析讨论了摩擦对聚合物表面接触强度的影响。     

共聚物水凝胶的合成及其溶胀性能研究

以过氧化二苯甲酰(BPO)为引发剂，合成了N-乙烯基吡咯烷酮(NVP)-甲基丙烯酸肛羟乙酯(HEMA)-甲基丙烯酸丁酯(BMA)共聚物水凝胶，可作为软性角膜接触镜材料。探讨了不同比例的NVP、HEMA、BMA对材料溶胀性能的影响。     

Characterisation of plasticity-induced closure--crack flank contact force versus plastic enclave

This paper presents some results from a totally new and powerful fusion between automated, digital photoelastic techniques and mathematical analysis of a crack experiencing closure. In essence, real-time photoelastic stress field data is acquired and fitted to a Muskhelishvili complex potential model of a loaded crack experiencing closure. The fit entails optimisation of multiple variables via a memetic algorithm, which combines a genetic algorithm and a local search. From observations made in this work, it is proposed that the plastic enclave around a crack tip will shield the crack from the full influence of the applied stress field. Furthermore, the effects of this ‘back stress’ are overcome by the applied tensile load in a way that, often, cannot be readily correlated with crack contact length, wake contact force, or with compliance.     

1960年前黄河下游河槽淤积物粒径组成分析

利用1999年汛前深层钻孔取样资料和历年淤积实测大断面资料分析出1960年前无三门峡水库影响的“自然”水沙情况下,下游河道主槽淤积物中d≥0.1 mm以上泥沙占50.7%,比1960-1999年大30个百分点,这种泥沙在下游的淤积比高达83.1%,比0.05 mm以上泥沙的淤积比高39个百分点。指出应在黄河中游寻找出0.1 mm以上的粗泥沙集中来源区作为近期水土保持的重点区域。     

An improved cryofixation method: cryoquenching of small tissue blocks during microwave irradiation

The metal contact method of rapid freezing is greatly improved by irradiating the specimen with microwaves at 2.45 GHz for a short period of time (50 ms), while pushing the specimen onto the surface of the copper block cooled by liquid N₂. The microwave irradiation, together with two technical improvements (a light-mass plunger and a recently developed β-gel shock absorber) for preventing bounce, produces a good freezing zone for squid retina, with high reproducibility for each experimental trial, extending from the contact surface to a depth of about 15 μm, which is comparable to the depth obtained by the metal contact method using liquid He in the absence of microwave irradiation. A good freezing zone was also experimentally demonstrated in specimens of rat liver and heart muscle. Microwave irradiation does not have appreciable effects on the ultrastructure of squid retina. The mechanism underlying the improvement in the rapid freezing under the microwave irradiation is discussed.     

Low-resistance polysilicon process in contact application for high density devices

For the lowest resistance, it is required to have the epitaxial silicon contact between the silicon plug and the substrate and good step coverage at the high aspect-ratio contact holes, simultaneously. In this work, a double polysilicon (DPS) deposition technique was proposed for the requirements. The first, thin silicon layer is deposited in a single-wafer process chamber with an in-situ H₂-RTP (rapid thermal process) treatment for the epitaxial contact, and the second silicon layer is formed in a batch-type furnace for good step coverage. From chain resistance, Kelvin R_c, and current-voltage (I–V) measurement, the DPS process meets both low resistance and good uniformity, so that it suggests a breakthrough in the small-sized, semiconductor device application.