房间空调器高效节能技术分析

本文主要介绍了高效节能型空调器的优化设计，包括选用高效压缩机、增大换热面积，增大风量、管路的合理设计，旨在提高制冷量，降低功耗，提高能效比。     

Industrial energy efficiency: the need for investment decision support from a manager perspective

Global competition, commitment to the Kyoto Protocol and a deregulated, integrated European electricity market will in all probability increase the demand for energy efficiency on the part of companies in Sweden. Investment decisions are an important part of meeting the new demands, because they decide the future efficiency of industrial energy systems. The objective of this study is to investigate, from a managerial perspective, the need to improve decision support in some industries, which can help to facilitate and improve investment decisions concerning energy efficiency. This work has been conducted through in-depth interviews with representatives for a number of energy-intensive companies and non-energy-intensive companies from different sectors. One need that was identified was the improvement of working methods in order to support the decision-making process. Here, external players seem to be playing an increasingly important role. Access to correct information, better follow-up activities, and transparent, understandable calculations are also considered to be important. The study will form the foundation for subsequent work on decision support and energy efficiency in industry.     

CHA无机凝胶体系的研究及应用

过去低渗油藏调剖，注入性和堵塞性很难统一，新研制的CHA无机凝胶体系是一种易注入、堵塞能力强的调剖剂，而且成胶时间在一定范围内可控。研究了配比、温度对CHA无机凝胶体系成胶时间的影响，成胶前的注入性，成胶后在高温高盐条件下的堵塞能力，得到了可应用于现场的CHA无机凝胶体系。该调剖剂在濮城油田沙三段和文卫结合部等高温、高盐低渗油藏应用后，取得了很好的效果。     

晶体硅薄膜电池制备技术及研究现状

晶体硅薄膜太阳电池近些年来得到广泛的研究和初步的商业化探索。根据所采用的晶体硅薄膜沉积工艺中温度范围的不同，晶体硅薄膜电池研究可分为高温路线和低温路线两个不同发展方向。本文分别从这两个方向综述了目前国外晶体硅薄膜电池制备技术的最新进展，最新实验室研究结果。报导了晶体硅薄膜电池商业化进展状况，指出了晶体硅薄膜电池实现产业化必须解决的问题。     

Analysis and Optimization of the Energy Efficiency in the 802.11 DCF

This paper introduces an analytical model to investigate the energy efficiency of the IEEE 802.11 distributed coordinated function (DCF). This model not only accounts for the number of contending nodes, the contention window, but also the packet size, and the channel condition. Based on this model, we identify the tradeoff in choosing optimum parameters to optimize the energy efficiency of DCF in the error-prone environment. The effects of contention window and packet size on the energy efficiency are examined and compared for both DCF basic scheme and DCF with four-way handshaking. The maximum energy efficiency can be obtained by combining both the optimal packet size and optimal contention window. To validate our analysis, we have done extensive simulations in ns-2, and simulation results seem to match well with the presented analytical results. The Ohio Board of Regents Doctoral Enhancements Funds and the National Science Foundation under Grant CCR 0113361 have supported this work. Xiaodong Wang received his B.S. degree in communication engineering from Beijing Information Technical Institute of China in 1995, and his M.S. degree in electric engineering from Beijing University of Aeronautics and Astronautics of China in 1998. He joined China Telecom in 1998 where he worked on communication protocols for telecommunication. From June 2000 to July 2002, he worked on GSM base station software development at Bell-labs China, Beijing, China. Currently he is a Ph.D. student in Computer Engineering at University of Cincinnati. His research activities include wireless MAC protocols, energy saving for wireless sensor networks. He is a student member of the IEEE. Jun Yin received the BS degree in automatic control from Dalian Railway Institute of China in 1997, and the MS degree in flight control from Beijing University of Aeronautics and Astronautics of China in 2001. Since 2001 she has been a Ph.D. student in the OBR Research Center for Distributed and Mobile Computing at the University of Cincinnati. Her research interests include performance evaluation of 802.11 MAC protocol, wireless ad hoc networks and sensor networks. She is a student member of the IEEE. Dharma P.Agrawal IEEE Fellow, 1987; ACM Fellow, 1998; AAAS Fellow, 2003 Dr. Agrawal is the Ohio Board of Regents Distinguished Professor of Computer Science and Computer Engineering in the department of Electrical and Computer Engineering and Computer Science, University of Cincinnati, OH. He has been a faculty member at Wayne State University, (1977–1982) and North Carolina State University (1982–1998). He has been a consultant to the General Dynamics Land Systems Division, Battelle, Inc., and the U. S. Army. He has held visiting appointment at AIRMICS, Atlanta, GA, and the AT&T Advanced Communications Laboratory, Whippany, NJ. He has published a number of papers in the areas of Parallel System Architecture, Multi computer Networks, Routing Techniques, Parallelism Detection and Scheduling Techniques, Reliability of Real-Time Distributed Systems, Modeling of C-MOS Circuits, and Computer Arithmetic. His recent research interest includes energy efficient routing, information retrieval, and secured communication in ad hoc and sensor networks, effective handoff handling and multicasting in integrated wireless networks, interference analysis in piconets and routing in scatternet, use of smart directional antennas (multibeam) for enhanced QoS, Scheduling of periodic real-time applications and automatic load balancing in heterogeneous workstation environment. He has four approved patents and three patent filings in the area of wireless cellular networks.     

UV法测定聚甲基丙烯酸酯纳米粒中胰岛素的包封率

建立一种简便易行的测定聚甲基丙烯酸酯胰岛素纳米粒中游离胰岛素含量方法.用Nanosep OD100C33超滤膜分离纳米粒和游离药物,在276 nm处测定药物的吸光度,建立胰岛素含量测定方法,并对线性、回收率、精密度等指标进行考察,最后测定各种胰岛素和载体比例混合的纳米粒的包封率.结果发现,该超滤膜能较好地分离纳米粒和游离的药物,在0.11～1.10 u/mL范围内,药物在276 nm的吸光度和浓度存在良好的线性关系(r=0.999 8),线性方程为A=0.868 8C-0.001 6,高、中、低3种浓度的回收率和精密度良好.该方法操作简单、结果可靠,可用于胰岛素纳米粒中药物包封率的测定.     

提高加热炉热效率措施的探讨

对本厂常减压装置提高加热炉热效率采取的措施进行了分析和总结     

Kinetics of DyNi2 film growth by electrochemical implantation

Electrochemical implantation was performed at Ni electrodes to form DyNi₂ films at 0.55 V (vs. Li⁺/Li), 0.62 V, and 0.70 V for 0.5-5.0 h in a molten LiCl-KCl-DyCl₃ (0.50 mol%) system at 700 K. It was found that the DyNi₂ films grew linearly with time with coulomb efficiency of about 100%. The obtained growth rates were higher at more negative potentials, i.e., 0.47 μm min⁻¹ at 0.55 V, 0.32 μm min⁻¹ at 0.62 V, and 0.14 μm min⁻¹ at 0.70 V. On the analogy of the metal oxide growth, the observed rapid and linear growth of DyNi₂ films may be explained by the existence of the outer and inner DyNi₂ layers.     

大庆油田三类油层聚合物驱注入速度研究

注入速度是影响聚合物驱开发效果的重要指标,而由于假设条件的局限性,数值模拟方法无法体现聚合物溶液弹性对注入速度的影响。为了确定大庆油田三类油层合理注入速度,通过不同注入速度条件下的天然岩心驱油试验,对水驱和聚合物驱驱油效率进行了研究,结果表明,聚合物驱驱油效率提高值随驱替速度的变化可由二次多项式来表示。依据此关系式,由势的叠加理论得到的流体在油层中的渗流速度的基础上,建立了该类油层合理注入速度模型,并给出大庆油田三类油层在100 m注采井距下的合理注入速度为0.288 PV年/,该方法对现场开发方案编制有重要指导意义。     

Improvement of emission efficiency in polymer light-emitting devices based on phosphorescent polymers

We report improvement of emission efficiency in polymer light-emitting devices (PLEDs) employing phosphorescent polymers. A hole-blocking layer was inserted between the emissive layer and the cathode to enhance recombination efficiency for the injected holes and electrons. Aluminum(III)bis(2-methyl-8-quinolinato)4-phenylphenolato (BAlq) was used for the hole-blocking layer. The resultant PLEDs exhibited significant improvement of emission efficiency. The respective external quantum efficiencies for red, green and blue PLEDs were 6.6, 11 and 6.9%. These values are very high compared with those based on conventional fluorescent polymers.