基于MSP430单片机的线路故障数据采集器硬件设计

基于MSP430的线路故障数据采集器整套设备具有超低功耗、高效管理故障指示器,对下与对上均采用无线通信方式且不会相互干扰等优势。文中以MSP430单片机为核心设计了一个专门用来管理挂接于配电线路的故障指示器的数据采集设备的硬件电路,并针对相关需求,给出了详细的硬件电路图。该系统可用于一次侧线路的故障检测,还可通过配合电能智能终端,应用于防窃电等场合。     

纯电动汽车太阳能辅助空调控制系统的硬件设计

纯电动汽车车载动力电池是其唯一的动力源且很有限,辅助设备消耗的电能减少了纯电动汽车的续驶里程,尤其是空调,所以开发高效的纯电动汽车空调系统是纯电动汽车能够被市场接受的关键。将纯电动汽车顶盖布满太阳电池,可以使空调系统的制冷能力增强,同时还能增加纯电动汽车的行驶距离。对小型纯电动汽车的太阳能辅助空调系统进行研究,设计出适合该空调的自动控制系统,可为纯电动汽车创造出一个更加舒适的驾驶和乘座环境。     

The need and prospects for improved fusion reactors

Conceptual fusion reactor studies over the past 10–15 yr have projected systems that may be too large, complex, and costly to be of commercial interest. One main direction for improved fusion reactors points toward smaller, higher-power-density approaches. First-order economic issues (i.e., unit direct cost and cost of electricity) are used to support the need for more compact fusion reactors. The results of a number of recent conceptual designs of reversed-field pinch, spheromak, and tokamak fusion reactors are summarized as examples of more compact approaches. While a focus has been placed on increasing the fusion-power-core mass power density beyond the minimum economic threshold of 100–200 kWe/tonne, other means by which the overall attractiveness of fusion as a long-term energy source are also addressed.Nomenclature a Plasma minor radius at outboard equatorial plane (m) - A Plasma aspect ratioR _T /a - AC Annual charges ($/yr) - b Plasma minor radius in vertical direction (m) - B Magentic field at plasma or blanket (T) - B _c Magnetic field at the coil (T) - B Toroidal magnetic field (T) - B Poloidal magnetic field (T) - BOP Balance of plant - C Coil - COE Cost of electricity (mills/kWeh) - CRFPR Compact RFP reactor - CT Compact torus (FRC or spheromak) - c _FPC Unit cost of fusion power core ($/kg) - DC Direct cost ($) - DZP Dense Z-pinch - E Escalation rate (1/yr) - EDC Escalation during construction ($) - ET Elongated tokamak - F Annual fuel charges ($/yr) - FC Component of UDC not strongly dependent or FPC size ($/kWe) - FW First wall - FPC Fusion power core - f _Aux Fraction of gross electric power recirculated to BOP - f ₁ (IC+IDC+EDC)/DC - f ₂ (O&M + SCR + F)/AC - IC Indirect cost ($) - IDC Interest during construction ($) - I _w Neutron first-wall loading (MW/m²) - i Toroidal plasma current (MA) - j Plasma current density, I/a² - k _B Boltzmann constant, 1.602(10)^–16 (J/keV) - LWR Light-water (fission) reactor - MPD Mass power density 1000P_E/M_FPC (kWe/tonne) - M _N Blanket energy multiplication of 14.1-MeV neutron energy - M _FPC Mass of fusion power core (tonne) - n Plasma density (m^–3) or toroidal MHD mode number - O&M Annual operating and maintenance cost ($/yr) - p _f Plant availability factor - PFD Poloidal field dominated (CTs, RFP, DZP) - P Construction time (yr) - P_TH Thermal power (MWt) - P _E Net electric power (1-)P _ET (MWe) - P_ET Total gross electric power (MWe) - p_f Fusion power (MW) - q Tokamak safety factor (B /B _gq )(a/R _T ) - q _e EngineeringQ value, 1/e - R _T Major toroidal radius (m) - RFP Reversed-field pinch - RPE Reactor plant equipment (Account 22) - S Shield - SCR Annual spare component cost ($/yr) - SSR Second stability region for the tokamak - S/T/H Stellarator/torsatron/heliotron - ST Spherical tokamak or spherical torus - T Plasma temperature (keV) - TDC Total direct cost ($) - TOC Total overnight cost ($) - UDC Unit direct cost,TDC/10 ³ P _E ($/kWe) - V _p Plasma volume (m³) - W _p Plasma energy (GJ) - W _B Magnetic field energy (GJ) - Magnetic utilization efficiency, 2nk_BT/(B ²/2₀) - ₀ Permeability of free space, 4(10)^–7 H/m - XE Plasma confinement efficiency, a²/4_E - _e Plasma energy confinement time - _p Overall plant efficiency, _TH(1-) - _TH Thermal conversion efficiency - _FPC AverageFPC mass density (tonne/m³) - Plasma vertical elongation factor,b/a - Thickness of allFPC engineering structure surround plasma (m) - Total recirculating power fraction, (P _ET-P _E)/P _ET, or inverse aspect ratioa/R _T This work was performed under the auspices of USDOE, Office of Fusion Energy.     

User-oriented product development applied to functional clothing design

A method for user-oriented product development is presented. After a theoretical introduction the method is applied to the development of functional clothing. The characteristic of the method is its starting-point with the user in the use-situation. Important product demands are derived from use-analyses. Three case-studies are described where this method has been applied. They concern working clothes, clothes for the elderly and military clothing. The quality of this methos as an instrument for product development in the clothing area is evaluated by comparing, on the one hand, this method with those usually used in the clothing industry, and on the other hand the new products with those formerly used. The method for user-oriented product development has proved to be complementary to conventional methods. It should be applied to products whose functional properties are of great importance. The method can be generalised to all users and to products with close connection to human beings.     

汽车同步器齿套摆线加工数控机床结构总体方案设计

将传统的汽车同步器齿套倒锥及滑块槽的几种加工方法，与用摆线逼近法加工汽车同步器齿套倒锥及滑块槽的加工方法加以比较，阐明了这种新方法产生的背景和优势；介绍了用摆线加工滑块槽的原理；在此基础上设计了汽车同步器齿套摆线加工数控机床的总体结构；给出了机床的主要动力和运动参数，最后展望了这种方法的应用前景。     

接灯片级进模设计

分析了接灯片冲压工艺和采用级进模生产的可行性 ,介绍了排样设计、模具结构特点及其工作过程     

基于标准件库的螺钉联接自适应设计

提出一种AutoCAD环境中基于标淮件库的螺钉联接自适应设计算法。利用螺钉和垫片以及被联接件之间设计信息的相关性自动确定装配方位及联接件的几何参数，自动检测和复原被联接件的剖面线，简化了设计过程。     

梯度功能材料研究的一些进展

综述了近年来梯度功能材料(FGM)在优化设计、制备、性能评价以及应用方面的最新研究进展，并对其中的热点问题作了系统阐述。对于热应力缓和型FGM，其优化设计的关键环节是准确分析残余热应力的大小和分布。液相法制备FGM以其低成本、操作简单的优势将会获得更大的发展。对FGM的性能测试要尽可能模拟实际使用环境下载荷的不均匀分布。梯度功能热障涂层是FGM的重要应用之一，它与传统的热障涂层相比可明显提高耐久性。此外，还介绍了FGM在面向等离子体护墙材料以及生物材料上的应用。     

压力机八杆内滑块机构的优化设计

提出用拉深区速度波动量、拉深速度、拉深深度、拉深角为评价压力机八杆内滑块机构性能优劣的指标。根据机构优化设计理论，用步长搜索法对其进行了优化设计，优化出多组以上指标均好于原机构的方案，并且最大压力角比原机构减小很多，其运动学性能超过原机构水平。     

Remanufacturability and Assessment Method

WITH the development of surface engineering andlaws on environment protect,lots of companies have toconsider reclaim of the used products.In practice,theyrealized if the products adopt design forremanufacturing,the benefit of remanufacturing wouldbe increased obviously'1'.Some researcher haveentered into remanufacturability field and built relativeevaluating methods'2'.Based on researching resultabout design for remanufacturing,some concepts,remanufacturability system and assessment method ar…