旋转机械量的加速度检测及误差分析

本文在采用旋转变压器完成位置、转速测量的基础上，对加速度的测量方法进行了理论分析和推导，并给出了加速度检测计算式以及测量误差的分析式。     

焊接与切割设备的使用与维修(三)——电弧焊机的使用须知和交流弧焊机的安装使用与维修

讲述了电焊机使用中应注意的事项,介绍了交流弧焊机的特点和弧焊变压器的分类。从交流弧焊机的安装地点及环境,动力线、开关、熔断器和焊接电缆的选择等方面详述了焊机的正确安装是保证焊机正常使用、保证安全及节约能源的重要条件。     

一种用于制氧装置的单片机控制器

介绍了一种用于制氧装置的单片机控制器的功能及其硬件、软件设计。同时指出，这种控制器还可发展成为一种通用的多路定时控制器。     

SEQUENTIAL LOOP CLOSING IDENTIFICATION OF MULTIVARIABLE PROCESSES USING THE BIASED RELAY FEEDBACK METHOD

Each controller in multiloop control systems for multivariable processes can be tuned sequentially with the ultimate information for the paired input and output while former loops have been closed, and hence, single-input single-output autotuning methods can be applied. In this sequential autotuning for multiloop control systems, several iterations are usually required for better control performances. Especially when pairings are undesirable, the autotuning sequences should be repeated with correct pairings, which result in long field experiments. Here, to avoid this drawback, a simple method to identify process models while loops are being sequentially tuned is proposed. The identified models can be used to correct pairings of multiloop control systems and to improve tuning performances without several field iterations. In addition, they can be used to obtain model-based control systems such as decoupling control systems.     

基于贪婪算法无线传感器网络中继节点布局的研究

为实现远距离的无线通信, 在网络中添加中继节点, 采用多跳路由传输数据。对于中继节点的布局问题, 依据线性结构使网络整体能量消耗最小的特征, 提出一种中继节点贪婪布局算法。该算法通过最近贪婪策略、中继节点通信容量、传感器节点数据转发跳数等约束方法限制中继节点的布局位置。理论分析和实验验证了该算法能够有效减少能量消耗, 延长网络寿命。     

压电陶瓷变压器材料PMMN-PZT的研究

研究了一种四元系压电陶瓷变压器材料PMMN -PZT。XRD分析证明 ,采用二步法预合成的PMMN -PZT粉料不如一步法 ;SEM分析进一步证实了一步法预合成的粉料能制成性能更好的陶瓷样品。造粒工艺对陶瓷样品的显微结构和压电性能也有重要的影响。最后制得了性能较好的PMMN -PZT压电陶瓷材料 ,其Kp=0 .5 18,Qm=3887,tanδ =0 .71% ,εT3 3 /ε0 =70 1,d3 3 =2 0 3,基本上能满足压电变压器的要求     

XH—14（15）直流不停电电源控制系统的改造

对ＸＨ－１４（１５）直流不停电电源控制系统存在的问题作了较全面剖析，所提出的和集控单元改造原控制系统是可行的。试验和运行结果表明，改造的新一代控制系统能较理想地满足负载要求。     

Betweenness estimation in OLSR-based multi-hop networks for distributed filtering

In traditional networks special efforts are put to secure the perimeter with firewalls: particular routers that analyze and filter the traffic to separate zones with different levels of trust. In wireless multi-hop networks the perimeter is a concept extremely hard to identify, thus, it is much more effective to enforce control on the nodes that will route more traffic. But traffic filtering and traffic analysis are costly activities for the limited resources of mesh nodes, so a trade-off must be reached limiting the number of nodes that enforce them. This work shows how, using the OLSR protocol, the centrality of groups of nodes with reference to traffic can be estimated with high accuracy independently of the network topology or size. We also show how this approach greatly limits the impact of an attack to the network using a number of firewalls that is only a fraction of the available nodes.     

农配网变压器烧毁的原因分析及防范对策

针对山区阳春市农配网的特点,从线路短路、雷击、负荷不平衡、运行维护不当等四个方面出发,详细分析了可能导致农配网变压器烧毁的原因,并提出了具体的防范对策,为农配网的运行维护人员提供参考,防止事故的发生。     

减少220 kV主变压器故障冲击技术措施

由于220 kV主变压器中压侧所配的过流保护需要与下级110 kV主变压器保护相配合,导致主变高、中压侧过流保护动作时间整定过长。在110 kV系统发生短路故障时,如果相关保护、开关不能正确动作,则主变压器将承受大电流、长时间的冲击,极有可能损伤变压器。