Prediction of sediment,particulate nutrient and dissolved nutrient concentrations in a dry tropical river to provide input to a mechanistic coastal water quality model

A Generalised Additive Modelling (GAM) approach is applied to prediction of both particulate and dissolved nutrient concentrations in a wet-tropical river (the Fitzroy River, Queensland, Australia). In addition to covariant terms considered in previous work (i.e. flow, discounted flow and a rising-falling limb term), we considered several new potential covariates: meteorological and hydrological variables that are routinely monitored, available in near-real time, and were considered to have potential predictive power. Of the additional terms considered, only flows from three tributaries of the Fitzroy River (namely, the Nogoa, Comet and Isaac Rivers) were found to significantly improve the model. Inclusion of one or more of these additional flow terms greatly improved results for dissolved nitrogen and dissolved phosphorus concentrations, which were not otherwise amenable to prediction. In particular, the Nogoa sub-catchment, dominated by pasture for cattle, was found to be important in determining dissolved inorganic nitrogen and phosphorus concentrations reaching the river mouth. This insight may direct further research, including future refinement of processed-based catchment models. The GAMs described here are used to provide near real-time river boundary conditions for a complex coupled hydrodynamic and biogeochemical model of the Great Barrier Reef Lagoon, and can be coupled with a forecasting hydrological model to allow integrated forecasting simulations of the catchment to coast system.     

Characteristics and formation mechanism of porosities in CFRP during laser joining of CFRP and steel

An experimental investigation on the mechanism of porosity formation during the laser joining of carbon fiber reinforced polymer (CFRP) and steel is presented. The porosity morphology and distribution were characterized by optical and scanning electron microscopy, and the thermal pyrolysis behaviors were investigated by thermal analysis and designed back-side cooling experiments. The results show that there are two types of porosities in CFRP. Porosity I only appears when the heat input is more than 77.8 J/mm. It has a smooth inner wall and distributes near the bonding interface between CFRP and steel at the central area of melted zone, which is caused by gaseous products such as CO₂, NH₃, H₂O, and hydrocarbons produced by the pyrolysis of CFRP. Porosity II can be seen under all joining conditions. It has a rough inner wall and distributes far away from the bonding interface, concentrating at the final solidification locations. Porosity II is caused by the shrinkage of melted CFRP during solidification stage.     

Landau-Zener模型中纠缠演化及转移的研究

研究了受外场驱动的两个二能级系统分别与两个单模量子化光场相互作用模型中纠缠演化及转移问题。该工作主要是对外场驱动的Landau-Zener模型进行了研究，采用旋转波近似的方法，通过数值计算详细分析了二能级系统初始状态、能级间的耦合常数以及驱动外场的参数对子系统间纠缠和转移特性的影响。结果表明，适当调节模型中的参数，可以使系统初始纠缠完全转移为光腔场间的纠缠，实现二能级系统与光场间的最大纠缠转移。     

Rectangular Section Control Technology for Silicon Steel Rolling

Rectangular section control technology(RSCT)was introduced to achieve high-precision profile control during silicon steel rolling.The RSCT principle and method were designed,and the whole RSCT control strategy was developed.Specifically,RSCT included roll contour design,rolling technology optimization,and control strategy development,aiming at both hot strip mills(HSMs)and cold strip mills(CSMs).Firstly,through the high-performance variable crown(HVC)work roll optimization design in the upper-stream stands and the limited shifting technology for schedule-free rolling in the downstream stands of HSMs,a hot strip with a stable crown and limited wedge,local spot,and single wave was obtained,which was suitable for cold rolling.Secondly,an approximately rectangular section was obtained by edge varying contact(EVC)work roll contour design,edge-drop setting control,and closed loop control in the upper-stream stands of CSMs.Moreover,complex-mode flatness control was realized by coordinating multiple shape-control methods in the downstream stands of CSMs.In addition,the RSCT approach was applied in several silicon-steel production plants,where an outstanding performance and remarkable economic benefits were observed.     

Value chain analysis of bio-coal business in Finland: Perspectives from multiple value chain members

The purpose of this study is to provide a comprehensive outline of the Value Chain (VC)¹ of bio-coal in Finland, define the proper business models of bio-coal business, and investigate the interrelationships between VC activities. The major findings are: 1) the study found significant interrelationships between support and primary activities in the bio-coal VC which suggest that we should not emphasis only the core value/primary activities of the bio-coal business, but pay more attentions to the “side values”/support activities; 2) The study identified political and environmental factors as the effective drivers, while technology and cost-profit uncertainty as major restrictions for the Finnish bio-coal business. The authors would like to suggest that instead of purely “environmental concerns”, the term “sustainability credentials” should be emphasized, which means value creating and adding items should not limit to monetary values, but consider social and environmental value propositions. 3) The study identified “low competition” in the current bio-coal business in Finland, which implies opportunities of market entrance for Finnish and international companies; 4) The study identified that the current Finnish bio-coal model is the decentralized model at the local level. However, the future Finnish bio-coal model will be a large scaled model, with a focus on export sales.     

Rapid detection of viable Bacillus cereus emetic and enterotoxic strains in food by coupling propidium monoazide and multiplex PCR (PMA-mPCR)

Bacillus cereus can cause emetic and diarrheal food poisoning. It is widespread in nature and therefore, considered a major foodborne pathogen. To develop a sensitive and reliable assay for detecting enterotoxin genes (nheA, entFM, hblD, cytK) and emetic toxin (ces), specific primers each targeting one individual gene were designed. Propidium monoazide (PMA) was coupled with the developed multiplex PCR (mPCR) for the detection of viable B. cereus. The inclusivity and exclusivity of the PMA-mPCR was confirmed using a panel of 44 strains including 17 emetic and 9 enterotoxic B. cereus reference strains and 18 non-target strains. The limit of detection (LOD) without PMA treatment in pure DNA was 2 pg/reaction tube. The LOD of mPCR assay in pure heat-killed dead bacteria was 4.0 × 10² CFU/mL. Also, the LOD on the viable bacteria with or without PMA treatment was similar (3.8 × 10² CFU/mL) showing that the PMA treatment did not significantly decrease sensitivity. Finally, the newly developed PMA-mPCR successfully detected 4.8 × 10³ and 3.6 × 10³ CFU/g of viable B. cereus F4810/72 (emetic) and B. cereus ATCC 12480 (enterotoxic) reference strains, respectively, in food samples. Hence, this study combines PMA and mPCR to detect viable B. cereus with a wide range of toxin detection (5 toxins). Thus, the novel PMA-mPCR assay developed in this study is a rapid and efficient diagnostic tool for the monitoring of viable B. cereus in food samples and potentially other samples via appropriate DNA extraction.     

Hydrocarbon-based electrode ionomer for proton exchange membrane fuel cells

The electrode ionomer is a key factor that significantly affects the catalyst layer morphology and fuel cell performance. Herein, sulfonated poly(arylene ether sulfone)-based electrode ionomers with polymers of various molecular weights and alcohol/water mixtures were prepared, and those comprising the alcohol/water mixture showed a higher performance than the ones prepared using higher boiling solvents, such as dimethylacetamide; this is owing to the formation of the uniformly dispersed ionomer catalyst layer. The relation between ionomer molecular weight for the same polymer structure and the sulfonation degree was investigated. Because the chain length of polymer varies with molecular weight and chain entanglement degree, its molecular weight affects the electrode morphology. As the ionomer covered the catalyst, the agglomerates formed were of different morphologies according to their molecular weight, which could be deduced indirectly through dynamic light scattering and scanning electron microscopy. Additionally, the fuel cell performance was confirmed in the current-voltage curve.     

Sustainability of ride-hailing services in China’s mobility market: A simulation model of socio-technical system transition

As a symbol of sharing economy, ride-hailing services have spread to Asia, where various forms of services have been established according to the existing socio-technical regimes, including legal, policy, and environmental concerns. China, in particular, has accepted ride-hailing services by revising existing institutions. This study analyzes China’s acceptance of ride-hailing services in the socio-technical system context set up for legacy services. Simulation modeling, combined with transition theory and an agent-based model, is used to analyze the data. This study calculates consumer disutility based on mobility market share, reflecting consumer preference, and predicts the sustainability of ride-hailing services. The simulation results conclude that legalization and socio-technical context are of importance for sustainable mobility.     

Formulation of sage essential oil (Salvia officinalis,L.) monoterpenes into chitosan hydrogels and permeation study with GC-MS analysis

This study deals with the formulation of natural drugs into hydrogels. For the first time, compounds from the sage essential oil were formulated into chitosan hydrogels. A sample preparation procedure for hydrophobic volatile analytes present in a hydrophilic water matrix along with an analytical method based on the gas chromatography coupled with the mass spectrometry (GC-MS) was developed and applied for the evaluation of the identity and quantity of essential oil components in the hydrogels and saline samples. The experimental results revealed that the chitosan hydrogels are suitable for the formulation of sage essential oil. The monoterpene release can be effectively controlled by both chitosan and caffeine concentration in the hydrogels. Permeation experiment, based on a hydrogel with the optimized composition [3.5% (w/w) sage essential oil, 2.0% (w/w) caffeine, 2.5% (w/w) chitosan and 0.1% (w/w) Tween-80] in donor compartment, saline solution in acceptor compartment, and semi-permeable cellophane membrane, demonstrated the useful permeation selectivity. Here, (according to lipophilicity) an enhanced permeation of the bicyclic monoterpenes with antiflogistic and antiseptic properties (eucalyptol, camphor and borneol) and, at the same time, suppressed permeation of toxic thujone (not exceeding its permitted applicable concentration) was observed. These properties highlight the pharmaceutical importance of the developed chitosan hydrogel formulating sage essential oil in the dermal applications.     

Friction compensation controller for load varying machine tool feed drive

The load applied to a machine tool feed drive changes during the machining process as material is removed. This load change alters the Coulomb friction of the feed drive. Because Coulomb friction accounts for a large part of the total friction the friction compensation control accuracy of the feed drives is limited if this nonlinear change in the applied load is not considered. This paper presents a new friction compensation method that estimates the machine tool load in real time and considers its effect on friction characteristics. A friction observer based on a Kalman filter with load estimation is proposed for friction compensation control considering the applied load change. A specially designed feed drive testbed that enables the applied load to be modified easily was constructed for experimental verification. Control performance and friction estimation accuracy are demonstrated experimentally using the testbed.