异步电机电感参数的离线辨识

在异步电动机反Γ型等效电路的基础上,提出了一种定转子总漏感与互感的离线辨识方法。在已有的异步电机运动控制平台上进行含高频成分很重的单相脉冲和单相低频正弦实验,然后根据霍耳传感器检测到的电压电流信号,经傅立叶变换来实现对异步电机参数的辨识,实验表明辨识结果具有较高的精度。并对逆变器的死区效应进行了一定的补偿,使计算得出的电压与逆变器实际输出电压基本一致,电流波形接近正弦波,补偿效果能满足参数辨识精度的要求。     

Response of SDOF bilinear elasto-dynamical models of cracked concrete beams for El Centro earthquake

Investigated herein are the dynamic responses of three different single degree of freedom (SDOF) bilinear dynamical models of a cracked concrete beam subjected to the El Centro earthquake. The first model is an equivalent unilinear model while the other two models have different stiffness values but differ from each other in the dependence of their damping coefficients on the sense of amplitude. All three models have the same natural period. The three models have been found to predict different response spectra for the same bilinear dynamical system. The effect of constant loading on the dynamical response of the concrete structures subjected to sinusoidal and random loading has been found to be significant for more flexible structures. Implications of these theoretical predictions for seismic design of concrete structures are discussed.     

独栋住宅土壤源热泵系统冬季供暖实证研究

本文以1栋上海地区独栋住宅为对象,对土壤源热泵系统冬季供暖性能和能效进行了实证研究.通过对系统运行参数的连续监测,实证了地埋管换热器每米埋管取热量、机组与系统的COP及系统节能率等指标.结果表明:地埋管换热器出水温度及循环温差较为稳定,埋管换热量为27 ～ 32 W/m;系统能效受部分负荷率影响较大,整个测试期系统COP在3.3～3.9之间;在满足同等舒适性条件下,土壤源热泵系统比空气源热泵节能31.0％,节能效果明显.     

常见电气二次控制原理图设计思路

结合工程案例图．对常见的电气二次控制原理图的基本设计思路、易被忽视的细节问题,以及常见控制电器二次图的设计特点、常用备用相互切换互锁原理进行说明。     

焊缝跟踪RBF整定PID控制算法

针对电弧焊接系统,研究一种基于径向基神经网络与比例积分微分控制相结合的焊缝跟踪控制新方法。在建立基于视觉传感的电弧焊焊缝跟踪系统的基础上,分析系统运动机构原理并研究两相混合式步进电机驱动焊炬运动数学模型,结合研究对象进行计算机仿真研究。试验结果表明,基于径向基整定比例积分微分的控制方法能够有效提高焊缝跟踪性能。     

Roof structure theory and support resistance determination of longwall face in shallow seam

Introduction　　IntheprocessofexploringthegreatshallowcoalfieldinNorthShaanxiProvince ,theintensityroofweight ingbehavior ,suchasbigroofstepsubsidenceatcoalface ,greatdynamicpressure ,etcarerevealed .Inthebe ginningof 90’s ,wehadmadeinitialresearchonthelawoffacesupportpressureandroofmovementoflong wallfaces[1,2 ] .Attheendof 90’s ,themechanismofroofweightingandtheroofstructuretheoryhadbeencarriedout .Finally ,tworoofstructuremechanicalmodelswereadvanced ,oneisthestructuremodelofasym metrya…     

矿用对旋轴流风机小流量工况下内部流动数值模拟

由于轴流式通风机小流量工况出现的非稳定工作特性,由此带来的缩小了风机的安全可靠运行区域,严重时可能带来颤振毁坏设备等安全性问题。通过数值模拟手段,对一矿用对旋式轴流式通风机小流量工况内部流动进行了深入研究。     

NJM—10大力矩马达定子内曲线专用加工设备的设计

介绍了ＮＪＭ－１０大力矩马达定子内曲线专用加工中设备中核心元件－凸轮的设计，加工及检验方法。