"定性结构力学"的内容体系及其在工程中的应用

在教学实践的基础上,结合工程实践,介绍了定性结构力学的内容体系,包括概念设计、计算模型的建立和简化、估算判断和计算结果的定性分析.并通过工程案例说明定性结构力学的重要意义.     

高压三电平变频器的滤波升压系统中能量过渡过程研究

从不同时间尺度上对高压三电平变频器的滤波升压系统进行数学建模，在秒级的时间尺度上主要研究该负载在不同负载稳态运行时的滤波情况，在毫秒级的时间尺度上主要研究故障时从变频切到工频时的电机过渡过程，从微秒级的尺度上研究了负载切换时缓冲吸收电路的能量过渡过程。同时由于变频器向该系统注入了大量的高频分量，为此建立了变压器高频分布模型，以评估变压器分布电容对全系统的影响。实验结果表明了模型和分析方法的有效性。     

光纤电磁场传感器中调制与解调电路的设计及实现

文［１］提出光纤电磁场传感器中的光调制与电解调技术。本文针对光纤电磁场传感器中的一些特殊问题，着重讨论光调制与电解调电路的设计原理。并将实现的电路应用于单光路检测的光纤电磁场传感器中，实验测试取得满意的结果。     

一种新型的IGBT驱动保护电路

介绍一种新型的性能较完善的IGBT驱动保护电路。实验结果表明,该电路能快速、安全、可靠地实现保护功能。     

简析火力发电厂生产节水方法

节约用水就是提高水的利用率，减少浪费，协调水资源与经济、环境关系的行动，火力发电厂由于生产过程的特殊性，用水量相对比例较大，所以节约用水更是势在必行。依据火力发电厂生产过程及其特点，节约用水应主要从查漏堵漏，增加节水设施，循环和重复用水，科学管理等几方面入手，从而达到节约用水的目的。     

混沌在序列密码系统中的应用

混沌信号序列的产生是混沌理论应用于信息加密系统中的一个重要问题,文章讨论了混沌信号序列产生的方法,同时提出了一种以混沌信号序列为密钥的序列密码系统,阐述了该系统的优越性,并采用CPLD与MCU完成了该系统的硬件实现。     

重载包装木箱端板结构分析

比较重载包装木箱端板的原有设计与加入斜挡的改进设计的端板结构受力分析,通过计算,改进后的端板结构端梁抗弯强度提高12倍,端面角立柱的抗压强度提高3倍,有效提高了重载包装木箱承载能力.     

Distribution of heavy metals during pyrolysis of waste printed circuit boards

The volatilization behavior of Cu, Pb, Sn, Sb, Ni, Zn, Mn, Co, Cr, Cd during pyrolysis of waste printed circuit boards was investigated in a bench-scale fixed-bed pyrolysis system. It was found that volatility of heavy metals increases with operating temperature elevating, and bromine and vacuum have an obvious promoting effect on volatility of most of heavy metals. Over 99% weight of Cu and Ni are still remained in solid residue after pyrolysis, about 20% weight of Sb, Zn and Cd are transfered into liquid and gas during a pyrolysis process at 600 ℃, volatilization fractions of Pb, Sn, Mn, Co, Cr are less than 10% at the same conditions. The contents of heavy metals in liquid and gas products depend on not only volatility of metals, but also their initial contents in printed circuit boards, pyrolysis liquid and gas are primarily contaminated by Cu, Pb, Sn, Sb and Zn, their contents in liquid vary from 10^2 to 10^3 pg/mL, Mn, Co, Cr, Cd were detected only at very low level, less than 10 μg/mL.     

Analysis of low energy arc discharge characteristics based on dynamic V-A characteristics model

Low energy arc discharge characteristics was analyzed based on dynamic V-A characteristics model. It draws conclusions that discharge time relates to the source voltage and the product of inductance and stable current, discharge time will increase when the source voltage increases; current reduce rate is in inverse proportion to the value of inductance; arc resistance when the arc occurs is the ratio of minimum arcing voltage to stable current. It also gains the expressions of arc resistance and arc power, arc resistance and arc power both increase as the source voltage increases and decrease as the value of inductance increases. Conclusions above mentioned are helpful to design intrinsically safe circuits.     

一种新型的简易测温系统电路

介绍一种新型的简易测温系统电路。测温系统采用一种新的电流／脉宽转换电路,与常用的测温系统比较,具有测量范围广、精度高、构成简单、成本低廉等优点。