Cost effectiveness of decentralized energy supply systems taking solar and wind utilization plants into account

In this article, results are presented of annual simulations of a decentralized (regional) plant for the power and heat supply of a residential complex. This complex consists of four houses with 40 flats all in all. The annual power consumption of the complex is 157 MWh and the heat requirement is 325 MWh. The concrete dynamics of the energy demands over the year is taken into consideration. The energy supply system is composed of a power-controlled combined heat and power (CHP) plant (55 kW), a photovoltaic plant (PV array or PV plant) array for power generation as well as a field of solar thermal collectors with a short-term accumulator for water heating and a long-term accumulator for supplying heat for domestic heating purposes. Simulation results demonstrate that synergetic effects result from the combination of a CHP plant with wind power and PV plants of varying sizes, which have an effect on the cost effectiveness of the plant as a whole with the different dynamics of energy sources (wind and solar energies) and of the consumption of power and heat being the decisive factors. The power deficits of wind power and PV plants are compensated through the application of a natural gas-operated CHP plant. In almost all variants, the demand for fossil energy carriers is distinctly less than in conventional energy supply plants.     

Diamino telechelic polybutadienes for solventless styrene-butadiene-styrene (SBS) triblock copolymer formation

High molecular weight, high functionality diamino telechelic polybutadienes (TPBs) were synthesized by ring-opening metathesis polymerization (ROMP) of 1,5-cyclooctadiene (COD) in the presence of a chain transfer agent, 1,8-dicyano-4-octene, followed by lithium aluminum hydride reduction. Melt coupling of diamino TPB with anhydride-terminated polystyrene (PS-anh) resulted in the formation of styrene-butadiene-styrene (SBS) triblock copolymers; ca. 80% maximum conversion of PS-anh was achieved within 30 s. The results from SAXS, TEM, and rheological measurements of the coupling products confirmed the formation of SBS triblock copolymers having lamellar morphology. A fluorescent-labeled PS-anh was used to study the coupling kinetics by diluting the reactants by the addition of non-functional PS.     

中高频小功率电子元器件用非晶材料的开发与应用

随着电力和电子技术的飞速发展，相应的元器件向高频化，小型化，高效率和节能的方向发展，从而对元器件用材料也提出了更高要求。为此，本文概述了冶金部钢铁研究总院近年来所研究的用于开关电源，脉冲变压器，传感器，电流互感器和电感器等方面的非晶软磁合金的性能及其应用概况。     

Recent investigations on some cubic Laves phase compounds of rare earth and transition metals

Pseudobinary alloy, Tb_0·27Dy_0·73Fe_2−δ , belonging to C-15 cubic Laves phase having MgCu₂-type structure, possesses large magnetostriction and high magnetomechanical coupling coefficient. The advantages of this material over existing piezoelectric materials, particularly for SONAR applications, are highlighted. Recent results on the influence of cobalt (Co) on magnetic and magnetomechanical properties of Tb_0·27Dy_0·73Fe₂ are discussed.     

自聚焦透镜用于端泵浦DPL的耦合光学系统

本文用自聚焦透镜耦合ＬＤ输出，解决了需要短焦距、大数值孔径透镜的设计和制方面的困难。提出了计算自聚焦透镜耦合效率的简化模型。用自聚焦透镜和一对正交柱面透镜设计了一个耦合系统，并用该耦合系统端泵浦Ｎｄ：ＹＡＧ棒做了实验。     

Σ-Δ过抽样转换器使用中的注意事项

为了充分发挥Σ Δ过抽样转换器的能力以获得最佳的系统性能 ,文章在分析直流电压、时钟抖动及电源的杂波等诸多因素对其影响的基础上 ,提出了适于Σ Δ过抽样转换器工作的最佳条件 ,对Σ Δ过抽样转换器系统的设计制作与调试有一定的指导意义     

甲烷和乙烷共同转化制乙烯的研究

甲烷和乙烷可以同时在Ｗ－Ｍｎ／ＳｉＯ２催化剂上得到活化生成乙烯。原料乙烷和甲烷体积比在０．１１～０．２５的范围内，当甲烷转化率为２０％左右时，共进料反应产物中乙烯体积浓度为８％～１２％，达到炼油厂催化裂化干气中乙烯的浓度。     

基于信息理论的采样成像系统优化设计方法

本文把信息论应用于采样成像系统中，用端到端的互信息量评价图像捕捉系统，研究光电一体化系统优化设计方法。模拟系统设计参数，计算机仿真分析了采样成像系统中普遍存在的欠采样噪声、光学成像系统的模糊效应以及二者之间的涨落、平衡，做出了基于互信息量的系统评价仿真曲线，提出了光学成像系统与图像捕捉系统的匹配条件和优化设计方法。     

1.30μmDFB激光器组件的设计和制做及其工作原理

本文自行设计和制作了１．３０μｍＤＦＢ激光器组件的讨论了光隔离和光耦合原理。由于采用的激光器－光隔离器－光纤的一体化结构，大大增加了该组件的可用性。在实验中得到高达５５％的耦合效率。     

A FETI-like domain decomposition method for coupling finite elements and boundary elements in large-size problems of acoustic scattering

Numerical simulations of acoustic scattering in the frequency domain based on hybrid methods coupling finite elements and boundary elements are the most suited for dealing with problems involving wave propagation in inhomogeneous media. Furthermore, it is necessary to resort to high performance computing to effectively solve the large size problems. However, the direct coupling yields a linear system with a matrix which is partly dense and partly sparse and thus not adapted to high performance computing. To avoid this difficulty, we present a new iterative method constructed from a non overlapping domain decomposition technique.