Effect of processing history on the properties of Ag-based tapes

The Bi-system tapes and coils were prepared by the powder-in-tube method. The effect of processing and heat treatment on the properties of the tapes and coils was studied. It is found that the shearing stress produced by the rolling process may destroy the 2223 phase, and the destroyed 2223 phase cannot be recovered by heat treatment, whereas the pressing stress produced by the uniaxial pressing process only makes the 2223 phase grains break, and the broken 2223 phase can be closed by the heat treatment. TheJ _c values of the rolling samples, pressing sample, and the coil with a diameter of 35 mm are over 1.3×10⁴, 2.5×10⁴, and 4×10³ A/cm² (77 K, 0 T), respectively.     

高频脉冲微束等离子电弧温度场的测试及分析

本文首次采用单波长激光干涉技术，对恒定直流和高频脉冲电流微束等离子电弧温度场进行了测试，并做了分析比较。以电弧温度分布为基础分析了高频脉冲电流微束等离子电弧收缩、稳定的原因。     

PWM开关变换器统一建模法与谐波分析法的应用

介绍了PWM开关功率变换器电路的统一建模方法，并将谐波分析方法应用于电路分析中，理论和实例表明，这种方法容易得到电路变量的基波解和各次谐波解，以及电路的传递函数，具有容易理解和准确度较高的优点。     

High-field magnetic and transport critical current density of Sm-Ba-Cu-O: Agx superconductors at low temperature

Variation of magnetic critical current density (J _mc) and transport critical current density (J _tc) in high magnetic fields at liquid helium temperature were investigated on Sm-Ba-Cu-O: Ag _x (x=0.0, 0.2, 0.4, and 0.6) superconducting samples prepared by the coprecipitation technique.T _c and crystallographic parameters remain unaffected by Ag addition. However, bothJ _mc andJ _tc were found to increase on Ag addition. The volume pinning force (F _p) also increased with increase in Ag concentration, resulting in stronger flux line sheer. Microwave-induced d.c. voltage measurement shows a significant reduction of the total number of weak links between the superconducting grains with increasing concentration of Ag, which creates stronger pinning potentials between the boundary of the superconducting intergrains. Hence, the volume pinning force is greatly enhanced by Ag addition, leading to flux line lattice movement which is responsible for highJ _mc andJ _tc.     

本征吸除硅片特性研究

本文描述硅本征吸杂片的特性参数,如吸除区宽度、洁净度,氧沉淀密度、MOS电容寿命,介绍了表面态密度及残余间隙氧浓度的检测方法和工艺对参数的影响及参数之间的内在联系,文章还实验论证了不同参数水平对器件成品率的影响,建立了以MOS电容寿命为主导的参数控制方法,利用本文提供的控制参数,可使CCD-512器件成品率达60％,以上优品率≥85％。     

变速铣削的试验研究

通过试验考证了变速铣削的减振效果和机床电机电流的波动幅度，试验结果表明，变速铣削同样具有明显的减振效果。机床电机电流虽有波动，但波动幅度不大，不会影响电机的正常使用，变速铣削具有良好的应用前景。     

定电流对LED的重要性

高功率超高亮度LED已经开始大量应用.要实际体现LED(尤其是高功率超高亮度LED)的优点,采用定电流驱动方式必要条件之一.     

软起动器在烧结机混料系统中的应用

软起动器以微处理器为核心，能够产生平滑的电压起动曲线，可任意设置稳定的起动电流，并具有多种保护。张钢24m^2烧结机混料系统应用软起动器后，交流电机起动平滑、无噪声，年节电5．6万kW．h，经济效益约2．4万元。     

The costs and benefits of tonal centers for chord processing.

Harmonic priming studies have shown that a musical context, with its established tonal center, influences target chord processing. This study investigated costs and benefits of priming tonal centers for target processing by adding a baseline condition (sequences without a specific tonal center). Results confirmed harmonic priming, with faster processing for related than for unrelated and less related targets (tonic chord, out-of-key chord, subdominant chord). Comparing targets in baseline contexts with targets in sequences with well-established tonal centers revealed a benefit of processing for related targets but a cost of processing for unrelated and less related targets. Findings are discussed in terms of tonal knowledge activation and suggest that an activated tonal center gives rise to strong expectations for the tonic. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

直流励磁机电刷打火的常见原因及对策

主要介绍了中铝公司山西分公司自备热电厂6台发电机组的励磁机电刷打火的常见原因的分析和处理方法。