一种测量工业环境感应传导干扰的方法

针对采用干扰测量仪或频谱分析仪只能测量工业环境中干扰源的辐射干扰强度的问题,提出了一种测量工业环境感应传导干扰的方法。该方法采用HBYV非双绞2芯线作为干扰接收体,采用数字示波器记录干扰波形的最大幅值和单个脉冲的最大强度,通过与标准干扰发生器感应到HBYV非双绞2芯线上的干扰信号大小进行比较,确定干扰强度。以瞬变脉冲群干扰强度和浪涌干扰强度的测量为例,详细介绍了该方法的具体实现。     

积分分离PID算法的电阻炉温度控制系统

为使大惯性、纯滞后的电阻炉温度控制系统的动态性能和稳态精度满足要求,提出了Smith预估结合积分分离PID算法;设计了温度控制器的硬件系统;对控制系统进行辨识;分析了Smith预估结合积分分离PID算法与单纯Smith预估控制算法的区别,并对两种控制算法进行了比较分析,确定了电阻炉温度控制系统参数;最后对Smith预估结合积分分离PID算法进行了电阻炉的温度控制实验;实验结果表明,采用Smith预估结合积分分离PID算法提高了电阻炉温度控制系统的稳定性,降低了系统的超调,稳态精度达到0.2℃,其动态性能和稳态精度满足系统控制要求.     

基于星敏感器的姿态优化估计算法

对于采用星敏感器的航天器姿态确定问题,提出了一种快速的姿态优化估计方法;首先,根据Rodrigues参数和观测向量之间的线性关系,引入四元数,构造了不同的非奇异的优化准则;其次,借助四元数,求解了基于该准则的姿态优化算法;误差协方差分析和数值仿真结果表明,该算法与著名的QUaternion ESTmation(QUEST)算法相比,在相同的操作系统环境下,具有相同的姿态估计精度,但计算速度更快,对两种算法选取间隔为2000次的仿真步长,统计数据长度为100个采样点,最后对结果加权求平均值,统计结果显示仅为QUEST的三分之一;这种姿态优化估计方法具有一定的工程应用价值。     

OMAPL138和FPGA的合并单元设计方案

提出了一种基于ARM9+DSP双核处理器OMAPL-138和FPGA的合并单元设计方案。给出了该方案的原理框图,以及具体的程序流程图,并在CCS开发环境下完成了软件编程,实现了合并单元按照IEC61850标准规定的格式进行数字量以太网传输。实验结果证明了该设计方案的可行性与正确性,为合并单元的设计提供了一种新的思路。     

gain bounds for systems with sector bounded and slope‐restricted nonlinearities

This paper proposes a new method for calculating a bound on the gain of a system comprising a linear time invariant part and a static nonlinear part, which is odd, bounded, zero at zero and has a restriction on its slope. The nonlinear part is also assumed to be sector bounded, with the sector bound being (possibly) different from that implied by the slope restriction. The computation of the gain bound is found by solving a set of linear matrix inequalities, which arise from an integral quadratic constraint formulation of a multiplier problem involving both Zames‐Falb and Popov multipliers. Examples illustrate the effectiveness of the results, and comparisons are made against the state‐of‐the‐art. Copyright © 2011 John Wiley & Sons, Ltd.     

Discretized LKF method for stability of coupled differential‐difference equations with multiple discrete and distributed delays

Time‐delay systems described by coupled differential‐functional equations include as special cases many types of time‐delay systems and coupled differential‐difference systems with time delays. This article discusses the discretized Lyapunov–Krasovskii functional (LKF) method for the stability problem of coupled differential‐difference equations with multiple discrete and distributed delays. Through independently dividing every delay region that the plane regions consists in two delays to discretize LKF, the exponential stability conditions for coupled systems with multiple discrete and distributed delays are established based on a linear matrix inequality (LMI). The numerical examples show that the analysis limit of delay bound in which the systems are stable may be approached by our result. Copyright © 2011 John Wiley & Sons, Ltd.     

Experiments with a hybrid interior point/combinatorial approach for network flow problems

Interior point (IP) algorithms for Min Cost Flow (MCF) problems have been shown to be competitive with combinatorial approaches, at least on some problem classes and for very large instances. This is in part due to availability of specialized crossover routines for MCF; these allow early termination of the IP approach, sparing it with the final iterations where the Karush Kuhn-Tucker (KKT) systems become more difficult to solve. As the crossover procedures are nothing but combinatorial approaches to MCF that are only allowed to perform few iterations, the IP algorithm can be seen as a complex ‘multiple crash start’ routine for the combinatorial ones. We report our experiments of allowing one primal-dual combinatorial algorithm to MCF to perform as many iterations as required to solve the problem after being warm-started by an IP approach. Our results show that the efficiency of the combined approach critically depends on the accurate selection of a set of parameters among very many possible ones, for which designing accurate guidelines appears not to be an easy task; however, they also show that the combined approach can be competitive with the original combinatorial algorithm, at least on some ‘difficult’ instances.     

A novel adaptive cooperative location algorithm for wireless sensor networks

To overcome the disadvantages of the location algorithm based on received signal strength indication(RSSI) in the existing wireless sensor networks(WSNs),a novel adaptive cooperative location algorithm is proposed.To tolerate some minor errors in the information of node position,a reference anchor node is employed.On the other hand,Dixon method is used to remove the outliers of RSSI,the standard deviation threshold of RSSI and the learning model are put forward to reduce the ranging error of RSSI and improve the positioning precision effectively.Simulations are run to evaluate the performance of the algorithm.The results show that the proposed algorithm offers more precise location and better stability and robustness.     

Some investigations on fuzzy P + fuzzy I + fuzzy D controller for non-stationary process

The paper addresses the adaptive behaviour of parallel fuzzy proportional plus fuzzy integral plus fuzzy derivative (FP+FI+FD) controller. The parallel FP+FI+FD controller is actually a non-linear adaptive controller whose gain changes continuously with output of the process under control. Two non-stationary processes, whose characteristics change with time, are considered for simulation study. Simulation is performed using software LabVIEW TM . The set-point tracking response of parallel FP+FI+FD is compared with conventional parallel proportional plus integral plus derivative (PID) controller, tuned with the Ziegler-Nichols (Z-N) tuning technique. Simulation results show that conventional PID controller fails to track the set-point and becomes unstable as the process changes its characteristic with time. But the parallel FP+FI+FD controller shows considerably much better set-point tracking response and does not deviate from steady state. Also, a huge spike is observed in the output of PID controller as the reference set-point and process parameters are changed, while the FP+FI+FD controller gives spike free control signal.