Positive state‐bounding observer for positive interval continuous‐time systems with time delay

This paper is concerned with the problem of positive observer synthesis for positive systems with both interval parameter uncertainties and time delay. Conventional observers may no longer be applicable for such kind of systems due to the positivity constraint on the observers, and they only provide an estimate of the system state in an asymptotic way. A pair of positive observers with state‐bounding feature is proposed to estimate the state of positive systems at all times in this paper. A necessary and sufficient condition for the existence of desired observers is first established, and the observer matrices can be obtained easily through the solutions of a set of linear matrix inequalities (LMIs). Then, to reduce the error signal between the system state and its estimates, an iterative LMI algorithm is developed to compute the optimized state‐bounding observer matrices. Finally, a numerical example is presented to show the effectiveness and applicability of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

Study on diffusion welding SiCp/ZL101 with Cu interlayer

Through the vacuum diffusion welding SiCp/ZL101 aluminum with Cu interlayer,the effect of welding parame-ter and the thickness of Cu on the welded joint property was investigated,and the optimal welding parameters were putforward at the same time.The microstructure of joint was analyzed by means of optical-microscope,scanning electron mi-croscope in order to study the relationship between the macro-properties of joint and the microstructure.The results showthat diffusion welding with Cu interlayer could be used for welding aluminum matrix composites SiCp/ZL101 successfully.     

Influence of the composition of the binder and the carbonation on the zeta potential values of hardened cementitious materials

Electroosmotic experiments have been carried out on eight different mixes of hardened cementitious matrixes including concrete, mortar and pastes, different types of binders, carbonated and non-carbonated specimens and different test conditions. From these trials, the zeta potential values have been determined and the optimum experimental parameters and devices have been established. In addition, the influence of the composition of the binder on the zeta potential has been quantified indicating that higher amounts of Al₂O₃ in the binder lead to higher positive values of zeta potential, while the SiO₂ acts just on the opposite side. This has been explained in terms of the different i.e.p. (isoelectric point) for both oxides. Concerning the influence of carbonation, it increases the absolute value of the zeta potential toward more negative values; this behaviour has been attributed to the influence of the specifically adsorbed Ca²⁺ in the negative sites of the surface in the non-carbonated samples.     

半参数广义线性模型惩罚似然估计的几个性质

本文在给出了半参数广义线性模型惩罚似然估计及惩罚准似然估计的基础上,得到了下面几个性质:(Ⅰ)极小惩罚似然估计及惩罚准似然估计等价于惩罚加权最小二乘估计;(Ⅱ)估计的收敛性及加速收敛法;(Ⅲ)估计的一种 Bayes 解释。     

SiC晶须对Si3N4陶瓷基复合材料机械强度的影响

制备了含10vol％,20vol％及30vol％SiC晶须的Si_3N_4基复合材料,对其室温及高温机械强度的测试研究表明,SiC晶须对基体的高温机械性能有明显的增强作用。含20vol％SiC晶须的复合材料1200℃下强度达780MPa,比基体材料提高50％。通过SEM和TEM研究,讨论了SiC晶须增强的原因。     

Stability analysis and controller synthesis for discrete uncertain singular fuzzy systems with distinct difference matrices in the rules

This paper mainly studies an extended discrete singular fuzzy model incorporating the multiple difference matrices in the rules and discusses its stability and design issues. By embracing additional algebraic constraint, traditional discrete Takagi-Sugeno (T-S) fuzzy model can be extended to a generalised discrete singular Takagi-Sugeno (GDST-S) model with individual difference matrices E_i in the locally singular models, where it can describe a larger class of physical or non-linear systems. Based on the linear matrix inequality (LMI) approach, we focus on deriving some explicit stability and design criteria expressed by the LMIs for the regarded system. Thus, the stability verification and controller synthesis can be performed by the current LMI tools. Finally, some illustrative examples are given to illustrate the effectiveness and validity of the proposed approach.     

实行(列)对称矩阵的QR分解

提出了行(列)倒置矩阵与行(列)对称矩阵的概念,研究了它们的性质,获得了一些新的结果,给出了实行(列)对称矩阵的QR分解的公式,它们可极大地减少行(列)对称矩阵的QR分解的计算量与存储量,而且不会降低数值精度.     

子矩阵约束下的反对称阵特征值反问题

矩阵的特征值反问题在结构设计、振动系统参数识别和自动控制等领域具有广泛应用。给出了子矩阵约束下反对称矩阵反问题解的一般表达式,并且给出了解的最佳逼近解。     

框架的行置换和列置换——处理复杂系统的新思维系列之四

本系列论文基于《多边矩阵理论》,由东方整体性思维所启迪,试图提供并完善一套从整体到局部处理复杂系统多指标问题、非均匀性问题、非线性问题的强有力的数学工具,并对其进行严格的理论推导和证明。本文利用群论的相关概念和结论,将其和框架的剖分运算相结合,引入了导出框架和对称框架的定义,证明了框架的行置换等价于列置换的结论,从而以后可以统一地处理指标间的置换问题。     

基于模糊神经网络的大场景人群密度估计方法 *

提出了一种估计大场景下密集人群密度的方法。该方法根据人类视觉的模糊性原理,认为用模糊集来划分人群密度范围比用确定的方法更符合人眼视知觉的认知方式,利用统计的方法确定灰度共生矩阵各指标对于各个密度类别的隶属函数;设计基于误差反向传播训练算法（BP）的模糊神经网络,计算样本模式对于各个密度类别的隶属度,并根据人群密度变化的时域连续性原理对人群密度范围进行合理估计。实验表明该方法提高了估计精度。