低相噪,低杂波数字锁相环路滤波器的设计

较详细地分析数字锁相频率合成器的相位噪声，着重用控制论方法对低相噪、低杂波锁相环的环路滤波器进行设计，并用某Ｓ波段频率合成器的实验结果进行了验证。     

新型可控电抗器大幅度限制操作过电压功能的研究

通过数值计算和模拟研究,本文叙述了新型可控电抗器的广泛的无功调节功能,揭示了它所具有的大幅度限压的能力,并在理想数学模型的基础上分析了电抗器的限压机理。     

TRVs and fault clearing stresses in extra-high-voltage radial networks

To cope with the high rate of increase of power demand in the main industrialized districts in Japan, 550-kV transmission systems covering the districts have been reinforced, with most of the main power plants connected directly to these systems. Through 550-/300-kV substations, the majority of power to the districts is supplied by 300-kV systems. To limit the excess short-circuit capacity in the 300-kV systems, they tend to be reconstructed as so-called radial networks. In radial networks with high short-circuit capacity and relatively small number of transmission lines connected to the substation busbars, the rate of rise of TRV can be far higher than standard value. This paper analyzes the transient recovery voltages (TRV) in such extra-high-voltage radial networks in Japan, together with the relevant stresses to circuit-breakers during fault clearings. Future system conditions have also been introduced. As the typical rate of rise of the TRV values, more than twice that of today's standard ones are probable.     

基于参考模型的自适应话音处理

本文讨论了一种带有参考通道的自适应话音消噪滤波器原理，该滤波器采用最小均方差(心幅)算法。将此滤波器应用于复杂噪音背景的话音信号提取，能很好地抑制背景噪声，从而获得清晰的话音信号。     

USL和USK系列振动筛防噪技术分析

为了改善筛分机械的使用环境，降低筛分机械的噪声，从噪声源入手，从内因和外因两个方面分析了筛分机噪声的形成原因。论述了USL和USK系列振动筛在降低噪声方面所采取的先进技术措施。     

奇异值分解压制随机噪声的方法及应用

针对随机噪声压制问题，通过对多项式确定的同相轴形状重新选取数据矩阵，再对新选取的数据矩阵进行SVD滤波，从而压制随机噪声。通过对矩阵奇异值分解的研究，揭示了奇异值分解的原理和SVD滤波原理，将一个多道地震记录看作一个图，它可分解为由一系列正交的子图，通过对子图适当选择并结合其它手段，从而达到提高信噪比的目的，为奇异值分解在地球物理中的进一步应用提供了理论依据。实际数据应用表明，该方法去噪手段灵活、保真性好、分辨率高，对一些突然的脉冲干扰、侧反射、以及其他的反向干扰有明显效果。     

自适应相干噪声衰减技术

去除噪声是必需的地震数据处理过程。由于地表条件和地震波激发、传播以及接收条件等诸多方面的原因，时常引起地震记录上出现各种相干干扰波。本文主要针对地震数据处理中地震剖面上存在的各种相干噪声，提出了时问一空间域自适应相干噪声衰减技术，以进行信噪分离。这种方法把噪声在整个处理平面上的视速度近似看作常量(正值或负值)，可以有效地消除地震剖面上的线性噪声、面波以及多次波等，并且对信号的保真度高。本文方法是复杂地区低信噪比地震数据处理的一种理想的噪声去除方法，具有运算速度快、压制噪声效果好等优点。     

Electrochemical noise analysis for estimation of corrosion rate of carbon steel in bicarbonate solution

We have investigated the electrochemical noise behavior of carbon steel in fully deaerated aqueous bicarbonate solutions, and discussed the optimum conditions of the noise analysis for estimating corrosion rate of the steel. Noise of the potential difference and of the short-circuit current between two identical steel coupons were successfully measured. The time-series noise patterns were transformed into frequency domain by fast Fourier transformation, and then their power spectrum densities (PSDs) at a frequency were determined to be compared with the corrosion rate. The PSDs of the potential and of the current varied with changing environmental factors of bicarbonate concentration, pH, and immersion time. The factors also controlled the corrosion rate of the steel. The PSDs were associated with the corrosion rate, and then it was found that the PSDs of the potential and of the current showed linear correlation with the corrosion rate in log-log scale. There was also linear relationship between the corrosion rate and a spectral noise resistance obtained from the PSDs of the potential and the current. The linearities of the three correlations were better at a lower analyzed frequency. Furthermore, the PSDs of the current and the noise resistance indicated more linear correlation with the corrosion rate than that of the potential. As the simplicity of the measurement system is additionally considered, it is concluded that the PSD of the current noise at an analyzed frequency of 3 mHz is the optimum conditions for estimating the corrosion rate from 10⁻² to 10⁰ A m⁻² in this study.     

补偿式光纤F—P干涉仪的信号处理系统

本文提出并研制成补偿式光纤F-P干涉仪信号处理系统,提出了用来测量微小位移信号的三种方法及电路,即透射峰时间间隔测量法、光脉冲基波幅度测量法(精密整流法)、鉴相法。测试结果表明:时间间隔测量法,它的最大灵敏度达到0.26纳米/微秒;精密整流法,最大灵敏度为2.38纳米/伏特。     

An efficient controller structure with minimum roundoff noise gain

Based on a polynomial operator approach, a new sparse controller structure is derived, which is actually an improved version of the recently proposed structure [Li, G. (2004). A polynomial-operator-based DFIIt structure for IIR filters. IEEE Transactions on Circuits and Systems II, 51, 147-151]. The performance of the proposed structure is analyzed by deriving the corresponding expression of roundoff noise gain and the problem of finding optimized sparse structures is solved efficiently with a genetic algorithm (GA). A numerical example is given, which shows that the newly developed structure can achieve much better performance than some well-known structures and particularly outperforms the traditional optimal fully parametrized realization greatly in terms of reducing roundoff noise and implementation complexity.