THE APPLICATION OF COKELET''''S WAVE THEORY IN THE CALCULATION OF WAVE-CURRENT FIELD

By using Cokelet's wave theory,the limiting wave height and the relative waveangular frequency in wave-current field were calculated in this paper.It is indicated by numeri-cal calculation that if the water depth is not too small,the result given by authors'calculationare very close to the results of limiting wave height by Dalrymple(1975)and to the data of rel-ative wave angular frequency by linear wave theory;but if water depth is rather small,thereare some discrepancy,     

异型材挤出口模内的流动模拟

本文根据挤出机理，对口模内的流动行为进行适当的简化和假定，建立了挤出口模内流动分析的数学模型，并采用横截面／假想区域法实现了复杂异型材挤出口模内的数值模拟，数值分析结果与三维有限元解和解析解的对比，取得了满意的效果。     

橡胶挤出机平均温差分析与计算

从理论上推导挤出机平均温差的计算公式，并指出与一般换热器平均温差计算的异同。     

The Stability of Runge－Kutta Methods for Systems of Delay Differential Equations

ＴｈｅＳｔａｂｉｌｉｔｙｏｆＲｕｎｇｅ－ＫｕｔｔａＭｅｔｈｏｄｓｆｏｒＳｙｓｔｅｍｓｏｆＤｅｌａｙＤｉｆｆｅｒｅｎｔｉａｌＥｑｕａｔｉｏｎｓ￥ＷＡＮＧＸｉａｏｂｉａｏ；ＬＩＵＭｉｎｇｚｈｕ(王晓彪)(刘明珠)（Ｄｅｐｔ．ｏｆＭａｔｈｅｍａｔｉｃｓ，Ｈａｒ...     

Stress analysis with arbitrary body force by boundary element method

Linear stress analysis without body force can be easily carried out by means of the boundary element method. Some cases of linear stress analysis with body force can also be solved without the domain integral. However domain integrals are generally necessary to solve the linear stress problems with complicated body forces. This paper shows that the linear stress problems with complicated body forces can be solved approximately without the domain integral. In order to solve these problems, the domain is divided into small areas using contour lines of body force. In these areas, the distributions of body force are assumed approximately to satisfy the Laplace equation.     

舰用燃气轮机框架模型的模态参数识别

本文采用一次有理正交多项式－多模态曲线合法对一舰用燃气轮机框架模型进行了实验模态分析，以Ｆｏｒｓｙｔｈｅ复合交多项式作为频响函数的理论值，用实测的频响函数建立系数矩阵，来寻找使目标函数最小的最优值，本文在ＨＰ９８２６微机上建立了建立了测试，数据采集及参数识别等系统识别软件，给出了具有工程实用意义的前五阶振动模态参数，识别结果和有限元计算相比较，令人满意。     

横观各向同性土介质与结构物共同作用的有限元与边界元耦合分析

本文采用有限元与边界元耦合方法对上与结构物进行共同作用的分析．其中上部结构采用有限元子结构法，地基上考虑为横观各向同性特性，应用边界元法，通过基础界面上位移连续、面力平衡的条件进行耦合分析．编制了相应的计算程序，对某高层空间剪力培与地基的共同作用进行了计算，与有限元法和实测结果进行了对比分析，得到了满意的结果．说明：有限元和边界元的耦合方法能充分发挥两者的优越性，不失为共同作用分析的一种有效途径．     

N_2/Fe(100)相互作用的动力学研究

用准经典轨迹法对N2－Fe（100）系统进行了研究，分析了氮分子在Fe（100）面上的直接散射和离解性吸附等过程中的能量传递和重新分配，阐明了表面催化的机理。作为准经典轨迹法更为深入的应用，研究了主要LEPS势参数和势特性对初始离解吸附几率（S0）的影响，得出了S0随势特性变化的规律。     

Spectral approximations of the Stokes problem by divergence-free functions

The method of Moser, Moin, and Leonard (1983) for the approximation of the three-dimensional Navier-Stokes equations using divergence-free subspaces is revisited and analyzed. It is shown that the computed velocity field converges to the physical one with spectral accuracy. Moreover, a method for recovering the pressure field is proposed. This method is stable and provides a pressure that converges to the physical one with spectral accuracy.     

RCC斜层平推铺筑法施工质量评估

RCC混凝土斜层平推铺筑法是一项新的施工工艺,本文通过芯样测试法对该工艺进行了全面细致的质量评估。